Manuale d’uso / di manutenzione del prodotto Handycam MSAC-SR1 del fabbricante Sony
Vai alla pagina of 24
1 -EN MSAC-SR1 Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Руководство по эксплуатации Перед.
2 -EN WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by AST A or BSI to BS 1362, (i.
3 -EN T able of contents Overview .......................................................................... 4 Checking supplied accessories ........................................ 5 Identifying the parts .............................................
4 -EN The MSAC-SR1 Serial Port Adaptor for “Memory Stick” is available for the Handycam. The MSAC-SR1 allows you to transfer pictures that have been recorded on “Memory Stick” with your Handycam to a PC. Moreover, using the supplied software “PictureGear 3.
5 -EN Checking supplied accessories Check that the following accessories are supplied with the MSAC-SR1. • MSAC-SR1 • Serial cable • AC power adaptor - AC-PT1 or - AC-PW1 Notes • The supplied serial cable can only be used for the MSAC-SR1 and cannot be used to connect other equipment (digital video camera, etc.
6 -EN Identifying the parts Front Rear 1 Processing lamp Indicates the MSAC-SR1 operating status. The lamp lights when writing or reading the “Memory Stick” data, or when transferring data between the “Memory Stick” and PC. 2 “Memory Stick” slot Insert the “Memory Stick”.
7 -EN To transfer pictures recorded on the “Memory Stick” with your Handycam to a PC, the software must be installed, and the MSAC-SR1 must be connected to the PC beforehand. For details about software installation, refer to the operating instructions supplied with the “PictureGear 3.
8 -EN Inserting the “Memory Stick” Insert the “Memory Stick” into the MSAC-SR1 as shown below. Position with the Sony label side up and insert in the direction of the 9 mark. Operation Note When inserting, make sure that the positioning and direction of the “Memory Stick” are correct.
9 -EN Removing the “Memory Stick” Make sure that the processing lamp goes off, and press the eject button. The “Memory Stick” ejects. Press the eject button. Note The processing lamp lights while data is transferred between the “Memory Stick” and the PC.
10 -EN If any problems occur while using the MSAC-SR1, use the following table for troubleshooting. Also, refer to the operating instructions supplied with your Handycam if necessary. Should the difficulty persist, contact your Sony dealer. An error occurs during “Memory Stick” data transfer.
11 -EN Specifications MSAC-SR1 Operating voltage DC 6 V Power consumption Approx. 70 mA (90 mA max.) Operating environment 0ºC to 40ºC (non-condensing) Access speed 115,200 bps max. Dimensions (w x h x d) Approx. 88 x 23.5 x 110 mm Mass Approx. 110 g Design and specifications are subject to change without notice.
2 -RU ПРЕДУПРЕЖДЕНИЕ Для предотвращения опасности возгорания или поражения электрическим током не подвергайте аппарат воздействию дождя или влаги.
3 -RU Оглавление Обзор ............................................................................... 4 Проверка прилаг аемых принадлежностей .............. 5 Обозначение к омпонентов .
4 -RU Адаптер последовательного порта MSAC-SR1 для платы памяти “Memory Stick” имеется в наличии для видеокамеры Handycam.
5 -RU Проверка прилагаемых принадлежностей Проверьте наличие принадлежностей, прилагаемых к аппарату MSAC-SR1.
6 -RU Обозначение компонентов Передняя панель Задняя панель 1 Функциональная лампочка Указывает функциональное состояние аппарата MSAC-SR1.
7 -RU Для передачи изображенний, записанных на плате памяти “Memory Stick” с помощью видеокамеры Handycam, следует снач.
8 -RU Установка платы памяти “Memory Stick” Установите плату памяти “Memory Stick” в аппарат MSAC-SR1, как показано на рисунке ниже.
9 -RU Вынимание платы памяти “Memory Stick” Убедитесь, что функциональная лампочка погасла и нажмите кнопку выталкивания. Плата памяти “Memory Stick” будет вытолкнута.
10 -RU В случае возникновения проблем при эксплуатации аппарата MSAC-SR1, воспользуйтесь следующей таблицей для отыскания неисправностей.
11 -RU В случае ошибки подсоединения. m Проверьте установку серийного кабеля (СОМ1 или СОМ2) на персональном комп.
12 -RU Технические характеристики MSAC-SR1 Рабочее напряжение 6 В постоянного тока Потребляемая мощность Приблиз.
.
Sony Corporation Printed in Japan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony Handycam MSAC-SR1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony Handycam MSAC-SR1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony Handycam MSAC-SR1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony Handycam MSAC-SR1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony Handycam MSAC-SR1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony Handycam MSAC-SR1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony Handycam MSAC-SR1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony Handycam MSAC-SR1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
