Manuale d’uso / di manutenzione del prodotto DSR-V10 del fabbricante Sony
Vai alla pagina of 72
3-862-931- 12 (2) ©1998 by Sony Corporation DSR-V10 Digital Video Cassette Recor der Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
2 English WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 Before you begin / Avant de commencer Before you begin Using this manual 4 Checking supplied accessories 6 Identifying the parts 7 Basic operations Installing the AC adaptor/charger 11 Inserting a c.
4 Welcome! Congratulations on your purchase of this Sony “Video Walkman” VCR. As you read through this manual, buttons and settings on the VCR are shown in capital letters. e.g., Set the POWER switch to ON. Note on Cassette Memory This VCR is based on the DVCAM format.
5 Before you begin / Avant de commencer Using this manual Precautions on VCR care • The LCD screen is made with high-precision technology. However, black points or bright points of light (red, blue or green) may appear constantly on the LCD screen. These points are not recorded on the tape.
6 12 45 3 Check that the following accessories are supplied with your VCR. 1 AC-V700 AC adaptor/charger (1) (p. 11, 19) The shape of the plug varies from region to region. 2 DK-415 connecting cord (1) (p. 11) 3 A/V connecting cable (1) (p. 31, 34, 36) 4 S video cable (1) (p.
7 Before you begin/ Avant de commencer Identifying the parts 1 LCD screen 2 LCD BRIGHT buttons (p. 13) 3 VOLUME buttons (p. 13) 4 EJECT knob (p. 12) 5 Cassette compartment (p. 12) 6 POWER lamp (p. 13) 7 Remote sensor Aim a Remote Commander (not supplied) here for remote control.
8 Identifying the parts !∞ r REC (recording) buttons and lamp (p. 36) !§ AUDIO DUB button (p. 39) !¶ DISPLAY button (p. 13) !• TC RESET button (p. 37) !ª REC ORG. TC button (p. 40) @º REC ORG. TC lamp (p. 40) @¡ & SLOW (slow) button (p. 15) @™ P PAUSE (pause) button and lamp (p.
9 Before you begin/ Avant de commencer Identifying the parts #™ PUSH OPEN button (p. 12) #£ LCD panel #¢ Hooks for hand strap #∞ Battery mounting surface (p. 11) #§ RELEASE knob Slide up to release the terminal cover when attaching an accessory (not supplied).
10 Identifying the Parts Operation indicators 1 Tape transport mode indicator 2 Cassette Memory indicator (p. 4) 3 DVCAM indicator 4 Warning indicator (p. 70) 5 BRT (bright) indicator (p. 13)/VOL (volume) indicator (p. 13) 6 Time code indicator / Self-diagnosis display (p.
11 Basic operations /Opérations de base Use the supplied AC adaptor/charger. (1) Set the mode change switch to VCR/ CAMERA. (2) Connect the connecting cord to the DC OUT jack on the AC adaptor/charger.
12 Inserting a cassette 1234 EJECT You can use mini DVCAM cassette with logo* only. Make sure that the power source is installed. (1) While pressing PUSH OPEN, open the LCD panel. (2) While pressing the small blue button, slide EJECT to the right. The cassette compartment automatically lifts up and opens.
13 Basic operations /Opérations de base (1) While pressing the small green button on the POWER switch, set it to ON. The POWER lamp (green) on the front lights up. (2) Press 0 to rewind the tape. (3) Press · to start playback. (4) Adjust the volume using VOLUME.
14 Playing back a tape Using a Remote Commander You can operate this VCR using a Remote Commander supplied with a Sony product. Set COMMANDER in the menu system according to the remote control code of the Sony product. Note on the beep sound A beep sounds when you turn the power on.
15 Basic operations /Opérations de base Playing back a tape Various playback modes To view a still picture (playback pause) Press P during playback. The PAUSE lamp (orange) lights up. To resume playback, press P or · . To locate a scene (picture search) Keep pressing 0 or ) during playback.
16 Playing back a tape Playing back a dual soundtrack tape When you play back a dual soundtrack tape, select the desired sound in the menu. (1) Press MENU to display the menu. (2) Turn the control dial to select HiFi SOUND, then press the control dial.
17 Basic operations /Opérations de base Playing back a tape Playing back a tape repeatedly (Auto Repeat) You can play back all or part of the tape repeatedly. (1) Press AUTO REPEAT. The AUTO REPEAT button lights up in orange. (2) Press 0 to rewind the tape to the beginning.
18 Accessory to be used Supplied AC adaptor/charger Battery pack NP-F730, NP-730H, NP-F750, NP-F930, NP-F950 Sony DC adaptor/charger DC-V700 Advanced operations Using alter native power sour ces Power.
19 Advanced operations /Opérations avancées Using the battery pack This VCR operates with the “InfoLITHIUM” battery pack (not supplied). If you use any other battery pack to operate your VCR, the VCR may not operate or the battery life may be shortened.
20 Charging time Battery pack Charging time * NP-F730 250 (190) NP-F730H/F750 270 (210) NP-F930 330 (270) NP-F950 360 (300) Numbers in parentheses indicate the time for a normal charge. ( Normal charge ) * Approximate number of minutes to charge an empty battery pack fully using the supplied AC adaptor/charger.
21 Advanced operations /Opérations avancées Using alternative power sources Install the battery pack on the VCR While pressing the battery pack, slide it to the left so that it attaches to the battery mounting surface firmly. Note on the battery pack Do not carry the VCR by grasping the battery pack.
22 You can change the mode settings in the menu system to further enjoy the features and functions of the VCR. (1) Press MENU to display the menu. (2) Turn the control dial to select the desired item, then press the control dial. Only the selected item is displayed.
23 Advanced operations /Opérations avancées Selecting the mode setting of each item COMMANDER <VTR1-6/OFF> • Select VTR1 - 6 when using a Remote Commander supplied with Sony product. • Select OFF when not using a Remote Commander or to prevent the unit from being operated by other Remote Commanders.
24 Changing the mode settings LCD COLOR* Select this item and change the level of the indicator by turning the control dial to adjust the color intensity of the picture. LCD HUE* Select this item and change the level of the indicator by turning the control dial to adjust the hue of the picture.
25 Advanced operations /Opérations avancées Searching a scene Using the Remote Commander supplied with a Sony digital video camera recorder, you can search a scene with a date. You can also search a photo (still picture) recorded by the Sony digital video camera recorder.
26 MENU CM SEARCH ON OFF 45 [a] [b] [c] JUL.5.1998 JUL.4.1998 DEC.31.1998 6 DATE 00 SEARCH Notes • The interval of the boundaries between the dates needs more than two minutes. The VCR may not search if the beginning of the recorded date is too close to the next one.
27 Advanced operations /Opérations avancées Searching a scene Searching for a photo - photo search/photo scan You can search for the recorded still picture - Photo Search function. There are two modes in Photo Search: • Using cassette memory, you can select the recorded date displayed.
28 Searching a scene Searching for a photo without using cassette memory - photo search You can use this function whether the tape has cassette memory or not. (1) Set the POWER switch to ON. (2) Press MENU to display the menu. (3) Turn the control dial to select the CM SEARCH, then press the control dial.
29 Advanced operations /Opérations avancées Searching a scene PHOTO 00 SCAN 2 Scanning photo - photo scan You can use this function whether the tape has cassette memory or not. (1) Set the POWER switch to ON. (2) Press SEARCH MODE on the Remote Commander repeatedly until the photo scan indicator appears.
30 Displaying r ecording data – data code function Using the Remote Commander supplied with a Sony digital video camera recorder, you can display recording data (date/time or various settings when recorded) on the LCD screen during playback (Data Code).
31 Advanced operations /Opérations avancées IN S-VIDEO VIDEO AUDIO S VIDEO AUDIO VIDEO TV VCR [a] [b] S VIDEO IN VIDEO IN AUDIO IN Connect this VCR to another VCR or video monitor to watch the playback picture on the video monitor. Open the jack cover.
32 Watching on a video monitor Pour afficher les indicateurs sur le moniteur vidéo Réglez DISPLAY sur V-OUT/LCD dans le menu et appuyez sur DISPLAY. Pour les désactiver, appuyez à nouveau sur DISPLAY. Pour raccorder un magnétoscope ou un moniteur vidéo sans prises d’entrée vidéo/audio Utilisez l’adaptateur RFU RFU-95UC (non fourni).
33 Advanced operations /Opérations avancées DV S VIDEO l LANC Editing onto another tape You can create your own video program by editing with any other DVCAM, mini DVCAM, h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC or l Betamax VCR that has audio/video inputs.
34 Using the A/V connecting cable or S video connecting cable Set the input selector on the VCR to LINE. Notes on editing when using the A/V connecting cable • Press DISPLAY, DATA CODE and SEARCH MODE on the Remote Commander (not supplied) to turn off the display indicators.
35 Advanced operations /Opérations avancées Editing onto another tape Starting editing (1) Insert a blank tape (or a tape you want to record over) into the (recording) VCR, and insert your recorded tape into this VCR.
36 : Signal flow/Sens du signal You can record a tape from another VCR or a TV program from a TV that has video/audio outputs. Connect this (recording) VCR to the (playback) VCR or TV. Turn down the volume of this VCR while editing. Otherwise, picture distortion may occur.
37 Advanced operations /Opérations avancées Recording from a VCR or TV Notes on connection • If the (recording) VCR is a monaural type, connect the yellow plug of the A/V connecting cable for video to the VCR. Connect only the white or red plug for audio to the VCR.
38 You can record an audio sound to add to the original sound on a tape by connecting audio equipment . You can add a sound on your recorded tape by specifying starting and ending points. The original sound will not be erased. Do not connect the video (yellow) plug.
39 Advanced operations /Opérations avancées MENU [] MENU AUDIO MIX ST1 ST2 : END Adding an audio sound on a recorded tape (1) Insert your recorded tape into the VCR. (2) Set the POWER switch to ON. (3) On this VCR, press · to set it to playback mode, and then locate the point where the recording should begin.
40 4 REC ORG.TC Duplicating the original tape You can copy the tape with the time code recorded. This function is useful to make a working tape from the original. Connecting VCRs Use this VCR as the recorder. Connect this VCR and the playback VCR at the DV IN/OUT jacks using the supplied DV cable.
41 Advanced operations /Opérations avancées Duplicating the original tape To stop duplicating Press π . Note that this VCR may keep recording only the playback picture. Notes • This function works only when the DVCAM format playback signal is input through the DV IN/OUT jack.
42 Additional information Compatibility of DVCAM and DV formats DVCAM format is developed as a more reliable and higher end format than consumer DV format. Here are explained about DVCAM and DV formats: the differences, compatibility, and limitations on editing.
43 Additional information /Informations supplémentaires DVCAM and DV cassettes Both DVCAM and DV cassettes can be used on DVCAM or DV video equipment. The recording format of picture is defined according to recorder’s format as described below. This VCR complies with DVCAM format.
44 Source tape Player’s format Recorder’s format Recorded format Cassette source Format du lecteur Format de Format de l’enregistreur l’enregistrement DV-formatted 1) Formatée DV 1) DV-format.
45 Additional information /Informations supplémentaires Compatibility of DVCAM and DV formats Limitations on editing You will find the following limitations when editing. • Due to the difference of a track pitch, you cannot record or edit on DV-formatted tapes using DVCAM video equipment.
46 Usable cassettes and playback modes Selecting cassette types You can use the mini DVCAM cassette only. You cannot use any other DV, h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC or l Betamax cassette. We recommend mini DVCAM cassette with cassette memory.
47 Additional information /Informations supplémentaires Notes on the mini DVCAM Cassette To prevent accidental erasure Slide out the protect tab on the cassette so that the red portion is visible.
48 Charging the vanadium-lithium battery in the VCR Your VCR is supplied with a vanadium-lithium battery installed so as to retain the menu settings, regardless of the setting of the POWER switch. The vanadium-lithium battery is always charged as long as you are using the VCR.
49 Additional information /Informations supplémentaires MENU 2,6 MENU CM SEARCH DATA CODE LCD COLOR LCD HUE DISPLAY JOG AUDIO CLOCK SET [MENU]:END JAN 1 1998 12:00 00 AM MENU CLOCK SET [MENU]:END 199.
50 To correct the date and time setting Repeat steps 2 to 6. The year indicators changes as follows: Note on the time indicator The internal clock of this VCR operates on a 12- hour cycle. • 12:00 AM stands for midnight. • 12:00 PM stands for noon.
51 Additional information /Informations supplémentaires Notes on “InfoLITHIUM” battery pack “InfoLITHIUM” battery pack The “InfoLITHIUM” battery pack is a lithium battery pack which can exchange data with compatible video equipment about its battery consumption.
52 Notes on “InfoLITHIUM” battery pack To obtain more accurate remaining battery indication • If the indication seems incorrect, use up the battery pack and then recharge it fully (Full charge 1) ).
53 Additional information /Informations supplémentaires Moisture condensation If the VCR is brought directly from a cold place to a warm place, moisture may condense inside the VCR, on the surface of the tape, or on the head drum. In this condition, the tape may stick to the head drum and be damaged or the VCR may not operate correctly.
54 Maintenance information and precautions Video head cleaning To ensure normal recording and clear pictures, clean the video heads. The video heads may be dirty when: • mosaic-pattern noise appears.
55 Additional information /Informations supplémentaires Maintenance information and precautions Precautions VCR operation • Operate the VCR on 8.4 V (AC adaptor/ charger) or 7.2 V (battery pack). • Should any solid object or liquid get inside the casing, unplug the VCR and have it checked by Sony dealer before operating it any further.
56 Maintenance information and precautions On AC adaptor/charger Charging • Use only a lithium ion type battery pack. • Place the battery pack on a flat surface without vibration during charging. • The battery pack will get hot during charging. This is normal.
57 Additional information /Informations supplémentaires Each country or area has its own electric and TV color systems. Before using your VCR abroad, check the following points. Power sources You can use your VCR in any country or area with the supplied AC adaptor/charger within 100 V to 240 V AC, 50/60 Hz.
58 Cause and/or corrective actions • The AC adaptor/charger is not connected to a wall outlet. m Connect the AC adaptor/charger to a wall outlet. (p. 11) • The battery pack is not installed. m Install the battery pack. (p. 19) • The battery is dead.
59 Additional information / Informations supplémentaires Cause and/or corrective actions • The video heads may be dirty. m Clean the heads using the Sony DVM12CL (not supplied) cleaning cassette. (p. 54) • The video heads may be dirty. m Clean the heads using the Sony DVM12CL (not supplied) cleaning cassette.
60 Others Symptom While editing using the DV connecting cable, recording picture cannot be monitored. The VCR becomes warm. No function works though the power is on. The numbers or letters of 5 characters is displayed as a counter. AC adaptor/charger Symptom The VCR/CAMERA or CHARGE lamp does not light.
61 Additional information / Informations supplémentaires When the CHARGE lamp flashes Check through the following chart. Trouble check When the CHARGE lamp flashes again Install another battery pack. When the CHARGE lamp flashes again The problem is with the AC adaptor/ charger.
62 Cause and/or corrective actions • Moisture condensation has occurred. m Remove the cassette and leave the VCR for at least 1 hour. (p. 53) • The video heads are dirty. m Clean the heads using the Sony DVM12CL cleaning cassette (not supplied). (p.
63 Additional information / Informations supplémentaires Cause et/ou mesures correctives • L’adaptateur/chargeur CA n’est pas raccordé à une prise murale. m Branchez l’adaptateur/chargeur CA sur une prise murale. (p. 11) • La batterie n’est pas installée.
64 Cause et/ou mesures correctives • La cassette stéréo est reproduite avec HiFi SOUND réglé sur 2 dans le menu système. m Réglez-le sur STEREO. (p. 16) • Le volume est au minimum. m Ouvrez le panneau LCD et appuyez sur VOLUME +. (p. 13) • AUDIO MIX est réglé sur le côté ST2 dans le menu système.
65 Additional information / Informations supplémentaires Cause et/ou mesures correctives • Débranchez le câble de connexion DV et rebranchez-le ensuite à nouveau. • Lorsque le magnétoscope est sous tension depuis un certain temps, il s’échauffe; il ne s’agit cependant pas d’un dysfonctionnement.
66 Dépannage Si le témoin CHARGE ne clignote plus Si le témoin CHARGE s’allume et s’éteint au bout d’un moment, le problème se situe au niveau de la batterie installée en premier lieu. Retirez la batterie de l’adaptateur/ chargeur CA. Réinstallez ensuite la même batterie.
67 Additional information / Informations supplémentaires Cause et/ou mesures correctives • De l’humidité s’est condensée. m Retirez la cassette et laissez le magnétoscope pendant au moins 1 heure. (p. 53) • Les têtes vidéo sont encrassées.
68 English Specifications VCR System Video recording system Two rotary heads, Helical scanning system Audio recording system Rotary heads, PCM system Quantization: Fs 32kHz (12bits, stereo 1, stereo 2), Fs 48kHz (16bits, stereo) Video signal NTSC color, EIA standards Usable cassette Mini DVCAM cassette with logo printed Tape speed SSP: Approx.
69 Additional information / Informations supplémentaires Français Spécifications Magnétoscope Système Système d’enregistrement vidéo Deux têtes rotatives, système de balayage hélicoïdal S.
70 W ar ning indicators If the indicators flash on the LCD screen, check the following: : you can hear the beep sound when BEEP is set to ON in the menu system. 1 The battery is weak or dead. Slow flashing: The battery is weak. Fast flashing: The battery is dead.
71 Additional information / Informations supplémentaires Warning indicators 5 The tab on the tape is out (red). 6 Moisture condensation has occurred. (p. 53) 7 The video heads may be contaminated. (p. 54) 8 The clock is not set. When this message appears though you set the date and time, the vanadium-lithium battery is discharged.
Sony Corporation Printed in Japan Index A Auto Repeat ................................ 17 B BEEP ............................................ 14 C Car battery .................................. 21 Charging battery pack .............. 19 Cleaning video heads .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony DSR-V10 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony DSR-V10 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony DSR-V10 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony DSR-V10 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony DSR-V10, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony DSR-V10.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony DSR-V10. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony DSR-V10 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
