Manuale d’uso / di manutenzione del prodotto CMT-EP30 del fabbricante Sony
Vai alla pagina of 20
Micr o Hi-Fi Component System Operating Instructions Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Parts Identification Main unit ............................................... 4 Remote Control ..................................... 5 Getting Started Hooking up the system .......................... 6 Inserting two size AAA (R03) batteries into the remote .
4 Cassette compartment qd (1 2 ) CD 4 ( 8, 9, 13, 15) Display Window 5 ( 9, 18) ENTER/PGM w; ( 7, 8, 9, 10, 12, 15) ISS 0 (13) MEGA BASS 8 (14) MONO STEREO 0 (1 1 ) MUSIC MENU 9 (1 4 ) PHONES jack ws .
Parts Identification 5 CD/REMAIN 3 (8, 9, 13, 15) CLOCK/TIMER/SLEEP SET qf (7, 15) MEGA BASS 2 (14 ) MUSIC MENU w; (1 4 ) PRESET +/– qj (10, 11) RDS (CMT-EP40 only) qh ( 11, 12) REPEAT qs (8) SHUFFL.
6 2 1 SPEAKER (IMPEDANCE USE 4 Ω ) L R 1 Connect the front speakers. Connect the speaker cords to the SPEAKER terminals as shown below. Getting Started Hooking up the system Do the following procedure 1 to 2 to hook up your system using the supplied cords and accessories.
Getting Started 7 To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Inserting two size AAA (R03) batteries into the remote Tip When the remote no longer operates the system, replace both batteries with new ones.
8 CD Loading the CD 1 Press Z PUSH OPEN/CLOSE down to open the lid of the CD compartment. 2 Place a CD with the label side up on the compartment. 3 Press Z PUSH OPEN/CLOSE down to close the lid of the CD compartment. Playing the CD — Normal Play/Shuffle Play/Repeat Play This system lets you play the CD in different play modes.
CD 9 Programing the CD tracks — Program Play You can make a program of up to 28 tracks in the order you want them to be played. 1 Press CD (CD/REMAIN on the remote), then place a CD. 2 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote) repeatedly until “ 00 PR.
10 To tune in a station with a weak signal Press TUNING (TUNING/CLOCK/TIMER on the remote) + or – repeatedly in step 2 to tune in the station manually.
Tuner 11 Tips • When an FM program is noisy, set MONO STEREO to MONO so that “ MONO ” appears in the display. There will be no stereo effect, but the reception will improve. • To improve broadcast reception, adjust the antenna (for FM) or reorient the main unit itself (for AM).
12 Tape Loading a tape 1 Press TAPE. 2 Press xZ . 3 Insert a tape in deck with the side you want to play/record facing forward. Playing a tape You can use TYPE I (normal) tape. 1 Load a recorded tape. 2 Press TAPE. 3 Press N . To Stop play Pause Fast-forward or rewind Remove the cassette Insert with the side you want to play/ record facing forward.
Tape 13 Steps Recording from a CD (CD Synchro Recording) Recording from the radio 1 Load a blank tape. 2 Press CD (CD/REMAIN on the remote). 3 Load the CD you want to record. 4 Press z . Press TUNER (TUNER/BAND on the remote). Tune in the station you want to record.
14 Sound Adjustment Adjusting the sound Press MEGA BASS. “ MEGA BASS ” appears in the display. To return to normal sound, press the button again. Selecting the audio emphasis Selecting the preset effect from the music menu Press MUSIC MENU repeatedly to select the preset effect you desire.
Sound Adjustment/Other features 15 3 Press CLOCK/TIMER/SLEEP SET on the remote repeatedly until “ ON 0:00 ” appears in the display. 4 Set the time to start playback using TUNING/CLOCK/TIMER + or – on the remote. 5 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote).
16 On operation • If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the CD and leave the system turned on for about an hour until the moisture evaporates.
Additional Information 17 T roubleshooting If you have any problem using this system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
18 The remote does not function. • There is an obstacle between the remote and the system. • The remote is not pointing in the direction of the system ’ s sensor. • The batteries have run down. Replace the batteries. The color irregularity on a TV screen persists.
Additional Information 19 Specifications Amplifier section AUDIO POWER SPECIFICATIONS: (U.S.A. model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 4 Ω loads both channels driven, from 120 - 10,000 Hz; rates 5 W per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 mW to rated output.
20 Sony Corporation Printed in China Specifications (continued) General Power requirements North American model: 120 V AC, 60 Hz European model: 230 V AC, 50/60 Hz Australian model: 230 V AC, 50/60 Hz.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony CMT-EP30 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony CMT-EP30 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony CMT-EP30 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony CMT-EP30 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony CMT-EP30, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony CMT-EP30.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony CMT-EP30. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony CMT-EP30 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
