Manuale d’uso / di manutenzione del prodotto CFD-E75 Marketing del fabbricante Sony
Vai alla pagina of 32
CD Radio Cassette-Cor der Operating Instructions 3-228-965- 11 (1) © 2001 Sony Corporation CFD-E75.
2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Basic Operations 3 T able of contents Basic Operations Playing a CD .................................................. 4 Listening to the radio ...................................... 6 Playing a tape ................................................. 8 Recording on a tape .
4 Connect the supplied AC power cord (see page 24). 1 Press Z PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. 2 Close the lid of the CD compartment. 3 Press u ( N on the remote). The player turns on (direct power-on) and plays all the tracks once.
Basic Operations 5 Use these buttons for additional operations POWER x u Jog dial VOLUME +, – Z PUSH OPEN/CLOSE To Do this adjust the volume Press VOLUME +, – (VOL +, – on the remote). stop playback Press x . pause playback Press u ( X on the remote).
6 Listening to the radio Connect the supplied AC power cord (see page 24). 1 Press RADIO BAND • AUTO PRESET until the band you want appears in the display (direct power- on). 2 Hold down TUNE + or – until the frequency digits begin to change in the display.
Basic Operations 7 Use these buttons for additional operations To Press adjust the volume VOLUME +, – (VOL +, – on the remote) turn on/off the radio POWER To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM.
8 Playing a tape Connect the supplied AC power cord (see page 24). 1 Press xZ to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 2 Press n . The player turns on (direct power-on) and starts playing.
Basic Operations 9 Use these buttons for additional operations To Press adjust the volume VOLUME +, – (VOL +, – on the remote) stop playback xZ fast-forward or rewind the tape m or M pause playback X Press the button again to resume play after pause.
10 Recording on a tape Connect the supplied AC power cord (see page 24). 1 Press xZ to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. To record from the CD player, insert a CD (see page 4) and press x on the CD section.
Basic Operations 11 3 Press z to start recording ( n is depressed automatically). Use these buttons for additional operations Tips • Adjusting the volume or the audio emphasis (see page 18) will not affect the recording level.
12 The CD Player Using the display You can check information about the CD using the display. Checking the remaining time Press DSPL • ENT MEM while playing a CD.
13 The CD Player Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 14). 1 Press x .
14 1 Press x . “ Cd ” appears in the display. 2 Press MODE until “ PGM ” appears in the display. 3 Turn the jog dial to select the track you want to program, and press DSPL • ENT MEM. Repeat this step. 4 Press u to start program play. Creating your own program (Program Play) You can arrange the playing order of up to 20 tracks on a CD.
15 The CD Player On the remote 1 Press x . 2 Press MODE until “ PGM ” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press N . To cancel Program Play Press MODE until “ PGM ” disappears from the display.
16 The Radio Presetting radio stations You can store radio stations into the player ’ s memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. 1 Press RADIO BAND • AUTO PRESET to select the band. 2 Hold down RADIO BAND • AUTO PRESET for 2 seconds until “ AUTO ” appears in the display.
The Radio 17 Playing preset radio stations Once you've preset the stations, use the jog dial on the player or the number buttons on the remote to tune in to your favorite stations. 1 Press RADIO BAND • AUTO PRESET to select the band. 2 Turn the jog dial to tune in the stored station.
18 The Audio Emphasis Selecting the audio emphasis (MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. Reinforcing the bass sound Press MEGA BASS. “ MEGA BASS ” appears in the display. To return to normal sound, press the button again.
The Timer 19 Before you set the clock, connect the power source (see page 24). 1 Press MENU • ALARM until “ CLOCK ” appears in the display, then press DSPL • ENT MEM. The hour digit flashes. 2 Turn the jog dial to set the current hour. Then press DSPL • ENT MEM.
20 4 Set the timer to the hour you want the music to start by turning the jog dial, then press DSPL • ENT MEM. Set the minutes, then press DSPL • ENT MEM. 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) 6 Turn the jog dial to set the volume, then press DSPL • ENT MEM.
The Timer 21 Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. 1 Play the music source you want. 2 Press MENU•ALARM until “SLEEP” appears in the display, and press DSPL•ENT MEM.
22 Using the countdown timer You can set the player to sound music or beep after a preset period of time, which is useful as a kitchen timer, etc. 1 Press MENU • ALARM for 2 seconds until “ ALARM ” appears in the display. 2 Turn the jog dial to display the time (OFF, 1 to 60 minutes) for the alarm and press DSPL • ENT MEM.
The Timer 23 4 Turn the jog dial to select the sound for the alarm by and press DSPL • ENT MEM. Display Sound for alarm bEEP beep MUSIC “ La primavera (Spring) ” from “ Le Quattro Stagioni (The Four Seasons) ” by Vivaldi 5 Press DSPL • ENT MEM to turn on the countdown timer.
24 Setting Up Choosing the power sources You can use the AC power or batteries as a power source. 1 Inserting the back-up batteries Insert three size AA (R6) batteries (not supplied) into the battery compartment. These batteries work to save the memory data.
Setting Up 25 2 Connecting the AC power cord Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet.
26 Additional Information Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing.
27 T roubleshooting General The power is not on. • Connect the AC power cord to the AC IN socket and a wall outlet securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate the player on batteries.
28 The sound drops out. Noise is heard. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged. • Place the player in a location free from vibration. • The sound may drop out or noise may be heard when using poor quality CD-Rs/CD- RWs or if there is a problem with the recording device or application software.
29 Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer.
30 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 4-ohm loads, both channels driven from 100 - 10,000 Hz; rated 1.5 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
31 Index A Alarm 22 Audio emphasis 18 B Batteries for memory 24 for player 25 for remote 25 C CD player 12 Choosing power sources 24 Cleaning cabinet 29 tape heads and tape path 29 Connecting AC power.
Sony Corporation Printed in China.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sony CFD-E75 Marketing è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sony CFD-E75 Marketing - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sony CFD-E75 Marketing imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sony CFD-E75 Marketing ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sony CFD-E75 Marketing, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sony CFD-E75 Marketing.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sony CFD-E75 Marketing. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sony CFD-E75 Marketing insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
