Manuale d’uso / di manutenzione del prodotto Backlit Remote del fabbricante Ayre Acoustics
Vai alla pagina of 20
Backlit Remote Owner’s Manual Multi-Component Backlit Remote Control.
.
Table of Contents Overview and Introduction . . . . . . . . . . . . . . . . . . . 2 Controls and Operation . . . . . . . . . . . . . . . . . . . . . 3 Optimization and Customization . . . . . . . . . . . . . . . . . . 14 A Place for Notes . . . . . . .
Overview and Introduction The Ayre Multi-Component Backlit Remote Control can control every remote-equipped Ayre preamplifier, integrated amplifier, power amplifier, and audio disc player made to date.
Controls and Operation The Ayre Multi-Component Backlit Remote Control has buttons to operate every available function of all Ayre preamplifiers , integrated amplifiers, power amplifiers, and audio disc players. (In addition, the Backlit Remote can control limited functions on an Ayre DVD or Blu-ray player.
Open/Close The “Open/Close” button opens and closes the disc tray. An open tray may also be closed by pressing gently on the front edge of the tray. Play Pressing the “Play” button initiates playback of the disc. If the drawer is open, pressing “Play” will also close the drawer.
The “Previous” button of the remote control handset can activate two separate functions, depending on how long the button is pressed. A quick button press (less than about ½ second) will activate the “Previous” function. A longer button press (greater than about ½ second) will activate the “Reverse Scan” function.
Please note that the behavior of the “Next” function varies depending on the type of disc being played. With a CD or SACD, pressing the “Next” button will navigate through the tracks, whether the disc is playing or stopped. Pressing the “Next” button while a DVD is playing will navigate through the tracks (DVD-A) or chapters (DVD-V).
After activating the “Reverse Scan” function with a longer button press of the remote control handset ’s “Previous” button, the unit will continue scanning backward until the “Play” button is pressed. Press “Play” when the desired location has been reached.
C-5xe MP Only Please note that the behavior of the front panel “Forward Scan” function of the C-5xe MP is slightly different than the remote control “Forward Scan” function.
that track, whether the disc is playing or stopped. Pressing the number keys while a DVD is playing will navigate through the tracks (DVD-A) or chapters (DVD-V). However when a DVD is stopped, pressing the number keys will instead navigate through the available groups (DVD-A) or titles (DVD-V).
C-5xe MP and Ayre DVD or Blu-ray Players Only The front panel display of the C-5xe MP and the DVD players has three brightness settings, plus an “Off” position as noted in the player ’s owner’s manual.
To exit the “Repeat” mode, either press the “Repeat” button to scroll through the modes or press the “Stop” button. Audio The “Audio” function is only available on DVD discs. The “Audio” function allows the selection of the various soundtracks available on most DVD-Video discs and some DVD-Audio discs.
(of any key) will extend the illumination time for three seconds after the key is released. Audio Functions The buttons on the lower section of the remote handset (below the Ayre logo) will operate an Ayre preamplifier, integrated amplifier, or power amplifier.
button a second time restores the volume to the previous level. Display Brightness The brightness of the front-panel display may be controlled via the remote handset Tape Output The tape outputs are controlled by a button on the remote control handset.
Optimization and Customization Battery Replacement The Ayre Multi-Component Backlit Remote Control uses 4 x AAA batteries, which are pre-installed at the factory. When battery replacement is required, remove the black plastic end-cap at the bottom of the unit by removing the two screws.
Changing the Transmission Code Most Ayre components use the Philips RC-5 transmission code for communication with the remote handset. However, the C-5xe MP Universal Stereo Disc Player and the Ayre DVD players use a Pioneer manufacturing kit and therefore use the Pioneer transmission code.
A Place for Notes 16 Rev. 1.2.
.
Ayre Acoustics, Inc. 2300-B Central Avenue Boulder, Colorado 80301 www.ayre.com +1-303-442-7300.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Ayre Acoustics Backlit Remote è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Ayre Acoustics Backlit Remote - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Ayre Acoustics Backlit Remote imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Ayre Acoustics Backlit Remote ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Ayre Acoustics Backlit Remote, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Ayre Acoustics Backlit Remote.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Ayre Acoustics Backlit Remote. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Ayre Acoustics Backlit Remote insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
