Manuale d’uso / di manutenzione del prodotto Soundscape Mixer del fabbricante Solid State Logic
Vai alla pagina of 109
soundscape mixer DSP-Powered Mixing Software for PC based Audio Workstations Reference Guide Version 4.3 English Version.
Soundsca pe Mixpander Page 2 of 109 Table 0f Contents 1. Introd uction ............................................................................................................... ........ 5 How to use th e manuals .................................
Soundsca pe Mixpander Page 3 of 109 Placing mixer elements in t he mixer column .................................................................................... ............... 49 Signal routin g in the mixer column ...............................
Soundsca pe Mixpander Page 4 of 109 Control/Edit toggle [E] ....................................................................................................... ...................................... 87 Take Snapshot ...............................
Soundsca pe Mixpander Page 5 of 109 1. Introduction How to use the manuals The SSL Soundscape product range has been designed from the ground up to be easy to use.
Soundsca pe Mixpander Page 6 of 109 configuration is different, because you are using a different version of Windows, because you are using different Windows settings, or because the lo ok of the SSL Soundscape Mixer can vary (e.g., the Toolbar can be moved around the main window ).
Soundsca pe Mixpander Page 7 of 109 2. Mixer The SSL Soundscape Mixer runs on the Motorola DSP chips of the SSL So undscape Mixpander card. The Mixer structure and routing are user defi nable and offer unrivalled flexibility for the use of real-time plug-in effects, EQs and processors.
Soundsca pe Mixpander Page 8 of 109 You can load different mixers to experiment wi th by clicking “Open” under the File menu. A standard Windows dialog box will appear allowing you to select a mixer. The default path for mixer files is: C:Soun dscapeMixsslMixer.
Soundsca pe Mixpander Page 9 of 109 output to a sequencer track, and then mute the re al-time effect to save pr ocessing power for other purposes. NOTE: Pressing the BP button .
Soundsca pe Mixpander Page 10 of 109 DSP resources and Mixer Auto Routing Assigning a mixer column to a DSP NOTE: This section assumes that Mixer Edit mode is selec.
Soundsca pe Mixpander Page 11 of 109 Mixer Auto Routing Mixer auto routing can be enabled or disabled by respectively ticking or unticking the “Auto Route Mixer” item under menu: Settings. If it is enabled, the SSL Soundscape Mixpander’s DSP resources will be allocated automatically when the mixer configuration is edited.
Soundsca pe Mixpander Page 12 of 109 Basic mixer column structure This diagram shows signal routing through a stereo input mixer column that uses an output element with fader.
Soundsca pe Mixpander Page 13 of 109 Viewing the Mixer The SSL Soundscape Mixer can be displayed in ei ther of two modes: full column size or small column size. Both options are available under the View menu, by clicking the corresponding View button in the Toolbar or by pressing the [X] or [Q ] key on the compute r keyboard.
Soundsca pe Mixpander Page 14 of 109 NOTE: Once a Mixer has been loaded, it remains active even if the window is closed.
Soundsca pe Mixpander Page 15 of 109 an EQ in after the send. If you need one aux iliary send in a mixer column and eight in anot her column, just create them as required, and so on! Mixer controls ov.
Soundsca pe Mixpander Page 16 of 109 Output pan and balance controls Output pan and balance sliders can be clicked and dragged with the mo use. It is also possible to change the value in the box, to the right of the slider: − Right-clicking or left-clicking in the box respecti vely increases or decreases the value in steps of 1.
Soundsca pe Mixpander Page 17 of 109 Faders Whenever several output faders are assigned to the same fader and mute group, clicking and dragging any single one of them with the right mouse button will cause all the faders in the group to move together.
Soundsca pe Mixpander Page 18 of 109 Right -clicking an inactive solo button solos the corre sponding output and all the outputs that have the same fader and mute group assignment.
Soundsca pe Mixpander Page 19 of 109 Creating/Editing a Mixer To create a Mixer, select “New” under the File me nu. If a Mixer is already open, you will be given the option to save it.
Soundsca pe Mixpander Page 20 of 109 NOTE: When the mouse pointer is placed on a tool icon, a tooltip is shown near the mouse po.
Soundsca pe Mixpander Page 21 of 109 Releasing the mouse button when the outline appe ars as a dashed line will undock the Toolbar:.
Soundsca pe Mixpander Page 22 of 109 To dock the Toolbar again, drag the Toolbar window back to the top, bottom, right side or left side of the main SSL Soundscape Mixer window.
Soundsca pe Mixpander Page 23 of 109 Basic principles: mixer element inputs/outputs, connecting mixer elements Each mixer element has at least one input and one output, and some elements have many more. These individual inputs and outputs come in three categories: "fixed", "assignable", and "recorder".
Soundsca pe Mixpander Page 24 of 109 Fixed inputs and outputs always connect to an output or input with a matching number. For instance, an element with a single mono output, (output 1), will always connect to the left side input, (input 1), of a stereo element, as shown belo w.
Soundsca pe Mixpander Page 25 of 109 It is important to take account of this when building a Mixer, because the two configurations shown above would look the same within a mixer column: If you need to check the input/output configuratio n of an existing mixer element, click on it with the Element Info tool in Mixer Edit mode.
Soundsca pe Mixpander Page 26 of 109 Assignable inputs/outputs The assignable inputs and outputs connect mixer elements across mixer colu mns, to the external inputs and outputs of the SSL Soundscape hardware, or to the host PC via the “streams”. In our diagrams they are not numbered.
Soundsca pe Mixpander Page 27 of 109 Recorder inputs/outputs The recorder inputs and outputs are specific to th e track insert elements. They are indicated by an "R" in our diagrams. The track in sert elements are designed as a practical way to connect to a recording application such as an audio + MIDI sequencer.
Soundsca pe Mixpander Page 28 of 109 The recorder inputs allow au dio data to be received from the recording application for playback. The diagram to the right shows how, when the sequencer is in Play mode, audio data received at the recorder inputs of a stereo track insert element is sent to the multi EQ element below via fixed outputs 1 and 2.
Soundsca pe Mixpander Page 29 of 109 Mixer column input/output configurations When you select the Create tool and click in an empty mixer column slot in “Mixer Edit” mode, a menu appears, prompting you to create a new mixer column.
Soundsca pe Mixpander Page 30 of 109 For mono in ‐ stereo out , the input is mono, but the input sig nal needs to reach both inputs of a stereo output element. This mixer column configur ation should only be created i n order to use a stereo process or effect on a mono source (e.
Soundsca pe Mixpander Page 31 of 109 For stereo in ‐ mono out , only the left side of the stereo input will be connected to the mixer column’s output. This configuration can be used to insert a 2 in/1 out mixer element such as a mono compressor with side-chain input.
Soundsca pe Mixpander Page 32 of 109 For stereo in ‐ mono to stereo out , only the left side of the stereo input is connected through the mixer column, but it splits into stereo at the pan cont rol.
Soundsca pe Mixpander Page 33 of 109 4 in ‐ stereo out mixer columns This configuration would be used for Dolby Surro und encoding, which will be descri bed later, and to insert a 4 in/2 out mixer element such as a stereo compressor with side-chain input (the Drawmer SDX100 was used in the example below).
Soundsca pe Mixpander Page 34 of 109 Mixer column input/output configurations for surround mixing For mono in ‐ mono to LRCS out , the signal path .
Soundsca pe Mixpander Page 35 of 109 The mono in ‐ mono to 5.1 out configuration is similar t o the mono in ‐ mono to LRCS out configuration, except that the output element has six individual outputs for L, R, C, LFE, Ls and Rs.
Soundsca pe Mixpander Page 36 of 109 For mixer columns with a mono or stereo to LRCS or 5.1 output, double-clicking the output element just next to the small surround panner, or in the output assignme.
Soundsca pe Mixpander Page 37 of 109 The Front, Rear and F/R (Front/Rear) divergence controls allow the sound to blend gradually, respectively between the front speakers (as if the fr ont speakers wer.
Soundsca pe Mixpander Page 38 of 109 – Four "L <-> R Pan Relation mode" buttons allow the pan dot positions to be controlled independently, or allow the dots to be linked so that their positions are automatically mirrored horizontally, vertically or diagonally when moving either pan dot.
Soundsca pe Mixpander Page 39 of 109 NOTE: The Dolby Surround process uses matrix encoding to combine 4 channels, (Left, Center, Right and Surround) into a mono and stereo compatible stereo signal.
Soundsca pe Mixpander Page 40 of 109 Other mixer column input/output configurations In addition to all the above, mixer column can also be created with 4, 6 or 8 inputs and outputs. These can be used for example to handle receiv e multitrack submix es via ADAT or AES/EBU ports.
Soundsca pe Mixpander Page 41 of 109 NOTE: The front panel routing matrix of the XLogic Alpha ‐ Link unit is deactivated when the Alpha ‐ Link is used with a Mixpander and the SSL Soundscape Mixer.
Soundsca pe Mixpander Page 42 of 109 Understanding the signal path The following diagram shows an exploded view of a possi ble routing which includes an external multi-effects unit connected to an SSL Soundscape Mixpander via a pair of analogue inputs of the Xlogic Alpha-Link.
Soundsca pe Mixpander Page 43 of 109 MULTI FX Out 15-16 U1 In 15/16 U1 Muted inputs Muted inputs Sequencer tracks 1/2 EQ’d Signal EQ’d Si g nal EQ’d Si g nal Multi FX return Tracks 1 to 4 & .
Soundsca pe Mixpander Page 44 of 109 Step by step mixer column T o f u l l y u n d e r s t a n d t h e m i x e r c r e a t i o n p r o c e s s , i t c a n b e u s e f u l t o t h i n k o f a p a r t i c u l a r m i x e r column configuration, then set out to create it.
Soundsca pe Mixpander Page 45 of 109 3. Click in a vertical mixer column slot with the Create tool, hold the mouse button down, select the required type of mixer column and release the mouse button. In this example we have opted for Stereo Input/Stereo Output with Fader and Equal Power Panning in mixer column slot 1: 4.
Soundsca pe Mixpander Page 46 of 109 5. Still using the Create tool, click anywhere within the blank area of the mixer column. A menu will appear where all available mixer elements are listed and can be selected.
Soundsca pe Mixpander Page 47 of 109 6. We had set out to create a track insert assigned to streams 9-10. Therefore, we need to modify the track insert assignment. Select the I / O a n d D S P A s s i g n t o o l ( w h i c h i s u s e d f o r modifying elements or routing) by clicking its icon…: …and click on the track insert element.
Soundsca pe Mixpander Page 48 of 109 7. Next, select the Create tool again, click in the blank area of the mixer column under the track insert. The mixer elements menu that you used to create the track insert will appear again.
Soundsca pe Mixpander Page 49 of 109 8. The required mixer column has now been crea ted. While you are in Mixer Edit mode, please take some time to experiment with the other to ols. It is possible to move or copy any mixer element within a mixer column using the Move or Copy tool .
Soundsca pe Mixpander Page 50 of 109 back (i.e., if an audio sequencer records from th is particular track insert, it will record the equalized signal). Using the internal buses The Mixer has a number of inter nal digital buses for each SSL So undscape Mixpander installed in the host computer.
Soundsca pe Mixpander Page 51 of 109 down increases or decreases the value continuo usly. The other mouse button can then be held down as well to speed up the process even more. − Double-clicking in a value box often calls up a dialog box where the required value can be entered using the computer keyboard.
Soundsca pe Mixpander Page 52 of 109 Clicking a track insert elemen t with the I/O and DSP Assign tool (in Mixer Edit mode) calls up a menu which can be used to change its stream assignment: Double-cl.
Soundsca pe Mixpander Page 53 of 109 Sends Several types of send elements are available: mono , stereo (with a balan ce control), mono to stereo (with a pan control), with or without Equal Power Panning. Any number of sends can be inserted anywhere in a mixer column as required.
Soundsca pe Mixpander Page 54 of 109 EQ 2-band The 2-band EQs are fully parametric, allowing band pass or notch filters with variable Q (bandwidth), cut and boost and center frequency. You can place as many EQs as you need in a mixer column and all will be active simultaneously.
Soundsca pe Mixpander Page 55 of 109 Double-clicking an EQ 2-band element opens the following window: The response of the EQ is shown in the curve display and you can adjust the parameters using the faders or value boxes in the usual way.
Soundsca pe Mixpander Page 56 of 109 Double-clicking the multi EQ element will ope n the following window, where all the parameters can be edited in several ways: Below the curve display, to the left of the window , there is an input attenu ator, wh ich is provided for the cases where boosting certain frequencies in the EQ causes overload .
Soundsca pe Mixpander Page 57 of 109 mouse pointer is held on one of the buttons , a banner will also appear displaying the corresponding curve type name. The other parameters, “Frequency”, “Q-factor”, and “G ain”, can be edited using the knobs or the value boxes: − The knobs can be “clicked and dragged” with the mouse.
Soundsca pe Mixpander Page 58 of 109 The EQ curve can also be edited directly in the curve display: − The center frequency for each EQ band is repr esented in the curve display by a “node”.
Soundsca pe Mixpander Page 59 of 109 The signal can be delayed by up to 255 samples. The value can be edited directly in the value box using the mouse buttons in the usua l way.
Soundsca pe Mixpander Page 60 of 109 The various controls and their operation have been described in the “Mixer controls overview”, “Output pan and balance controls”, and “Fader and mute groups, output mute buttons, solo groups and solo buttons” sections of this chapter.
Soundsca pe Mixpander Page 61 of 109 MS Decoder NOTE: The MS (“mid ‐ side”) recording technique consists of combining (matrixing) two signals, typ.
Soundsca pe Mixpander Page 62 of 109 The gain and width parameters for the MS signal can be adjusted directly in the mixer column using the mouse buttons. If you hold down both mouse buttons the values can be changed more quickly, and the direction of the change is dete rmined by the mouse button pressed first.
Soundsca pe Mixpander Page 63 of 109 The editable parameters are as follows: Input section – Lock Mid button: If the Lock Mid mode is activated (button highlighted): ...then the relative gain of the mid MS matrix inpu t signal is not affected by the “width” setti ng (described below).
Soundsca pe Mixpander Page 64 of 109 – Switch Outputs button: Interchanges the output channels. – Toggle Mid On/Off button: Clicking this button cuts the mid MS matrix input signal (as shown above), so that the effect of the MS matrix on the side signal can be monitored easily.
Soundsca pe Mixpander Page 65 of 109 Graphical display The display provides a visual repr esentation of the perceived soun dfield, as defined and modified in real time by the parameter controls, and co ntributes to the intuitive operation of the MS Decoder.
Soundsca pe Mixpander Page 66 of 109 Bass Shelving section – Gain M (-6.0, 6.0 dB): Bass shelving gain setting of th e mid MS matrix input signal. This parameter is used in combin ation with the “Gain S” parameter mainly in order to enhance the stereo perception at lower frequencies.
Soundsca pe Mixpander Page 67 of 109 SDX100 compressor/expander/noise gate, the Sa turated Fat distortion and cabinet modelling processor and Final Mix mastering processor by Acuma Labs, the SSL Console EQ and Filters by Solid State Logic and the Soundscape EACM EQ1 and EQ2.
Soundsca pe Mixpander Page 68 of 109 column will use the same streams. Available streams are assigned automatically to VST plug-ins, taking into account that streams already used by a Windows application or assigned to a mixer input, output or send element are not availabl e.
Soundsca pe Mixpander Page 69 of 109 Operationally, VST plug-ins within the SSL Soun dscape Mixer gen erally behave in a similar fashion to Soundscape format DSP-powered plug-ins and Soundscape mixer elements in general.
Soundsca pe Mixpander Page 70 of 109 If a processing overload occurs in the host P C, a warning messag e is displayed, the VST mixer elements turn red and the Mixer is deactivated: Click “OK” to close the message box. To reactivate the Mixer, its configuration must be changed.
Soundsca pe Mixpander Page 71 of 109 VSTi mixer elements Everything written in the previous section ab out VST plug-ins also applies to VSTi (VST instrument) plug-ins.
Soundsca pe Mixpander Page 72 of 109 Additional information regarding VST/VSTi plug-in compatibility A command line switch is needed to enable certain VST or VSTi plug-ins to work in the Soundscape environment.
Soundsca pe Mixpander Page 73 of 109 NOTE: Using this comma nd line switch may sl ow down the performance of the Console Manager application, although this is generally unlikely.
Soundsca pe Mixpander Page 74 of 109 3. Control Surfaces and Automation The SSL Soundscape Mixer can be controlled fr om a hardware control surface and supports full MIDI automation via the SSL Soundscape Console Manager program, which can be downloaded from the Solid State Logic website.
Soundsca pe Mixpander Page 75 of 109 …will call up a window where all the automatable controls for that element are listed: The automation can be enabled or disabled for each individual parameter by.
Soundsca pe Mixpander Page 76 of 109 4. Status Bar The Status Bar is located at the bottom of the SSL Soundscape Mixer window. It can be show n or hidden by ticking or unticking “Status Bar” under the View menu.
Soundsca pe Mixpander Page 77 of 109 5. File Menu New [Ctrl]+[N] Clicking “New”. will create a new, empty Mixer, as described in the “Mixer” chapter. If a Mixer is already active when you click this item and has been edited since the last save, the following dialog box will appear, giving you t he option to save it.
Soundsca pe Mixpander Page 78 of 109 Open [Ctrl]+[O] Clicking “Open” calls up a standard Windows dialog box which can be used to open a mixer file stored on the PC.
Soundsca pe Mixpander Page 79 of 109 If the Mixer you are opening has one or more colu mns which refer to units that are not available (e.g., cards that you have removed from the computer ), the following dialog box will be displayed: Select “Skip this column” if you want to load the Mixer without these columns.
Soundsca pe Mixpander Page 80 of 109 In the bottom section of the dialog box you can spec ify what action sh ould be taken the next time this situation occurs.
Soundsca pe Mixpander Page 81 of 109 Save As Clicking “Save As” calls up a standard Windows dialog box where the Mixer can be named or renamed and the save destination changed: Previous mixers This section of the menu displays a list of the most recently used mixers.
Soundsca pe Mixpander Page 82 of 109 Close Clicking “Close” closes the SSL Soundscape Mi xer window. However, the Mixer remains active a n d t h e wi n d o w c a n b e r e o p e n e d b y c l i c ki n g t h e s y s t e m t r a y i c o n .
Soundsca pe Mixpander Page 83 of 109 6. View Menu Toolbar Ticking or unticking this item determines whether the Toolbar wi ll be shown as in the picture below…: …or hidden as shown here: NOTE: .
Soundsca pe Mixpander Page 84 of 109 Status Bar Ticking or unticking this item de termines whether the Status Bar placed at the bottom of the SSL Soundscape Mixer window will be shown as in the picture below…: …or hidden as shown here: NOTE: Right ‐ clicking the Status Bar calls up a pop ‐ up menu.
Soundsca pe Mixpander Page 85 of 109 If the “Use hierarchical mixer element selection menu” option is enabled (ticked), the menu is broken down into several sections: a smaller ma in menu, and pop-up submenus. All the standard mixer elements can be accessed fr om 3 main menu items: Version 2.
Soundsca pe Mixpander Page 86 of 109 Error status The “Clear Error Status”, “Watch for Errors” and “Keep Error Status until Clear” items of the Vi ew menu are also available in a pop-up menu that can be called up by right-clicking the Status Bar.
Soundsca pe Mixpander Page 87 of 109 7. Edit Menu Tool selection The first section of the Edit menu lists the editing tools, and clicking on any item in this section assigns the corresponding tool to the left mouse button.
Soundsca pe Mixpander Page 88 of 109 8. Settings Menu NOTE: Some options that appear in the Settings menu apply to the SSL Soundscape Mixtreme and Mixtreme 192 hardware.
Soundsca pe Mixpander Page 89 of 109 When the mouse pointer is on “Master Device ” a submenu listing the hardware units (SSL Soundscape audio cards) installed in the PC is displayed. Clicking the name of a card selects it as t h e M a s t e r D e v i c e .
Soundsca pe Mixpander Page 90 of 109 When AES/EBU-A 1-2, AES/EBU-A 3-4, AES/EBU-A 5-6 or AES/EBU-A 7-8 is selected, the SSL Soundscape hardware is slaved to the AES Clock signal received via the corresponding AES/EBU input pair of the XLogic Alpha-Link un it’s eight-channel AES/EBU connector A.
Soundsca pe Mixpander Page 91 of 109 Synchronization This option is not applicable to th e SSL Soundscape Mixpander hardware. Specific hardware settings When the mouse pointer is on “Specific hardware settings” submenus will be displayed allowing hardware settings to be defined.
Soundsca pe Mixpander Page 92 of 109 Sample Rate When the mouse pointer is on “Sample Rate”, a su bmenu appears that lets you select the Sample Rate. In a multiple unit configuration, Sample Rates that are not supported by the Master Device will appear dimmed.
Soundsca pe Mixpander Page 93 of 109 some Soundscape format DSP-powered plug-in de mos (mentioned in the “Main Mixer” line if installed) and the VST/VSTi functionality (mentioned in the “Main Mixer” line if VS T/VSTi dll files are present in the Soundscape VST folder).
Soundsca pe Mixpander Page 94 of 109 When all the required passwords have been entered, click the “Save” button to enable them and exit the window. If you click “Cancel” a dialog bo x will require confirmation that you wish to cancel the password input: Click “Yes” to close the window, or “No” to make further corrections.
Soundsca pe Mixpander Page 95 of 109 Native mixer elements Sample Buffer Size Clicking this item calls up a dialog box which c an be used to set the Sample Buffer Size for native mixer elements: The default buffer size for native mixer elements is 128 samples.
Soundsca pe Mixpander Page 96 of 109 Auto Route Mixer Ticking or unticking this item respectively enab les or disables the Mixer Auto Routing function. Please see the “DSP resources and Mixer Auto Rout ing” section of the “Mixer” chapter for details.
Soundsca pe Mixpander Page 97 of 109 9. Help Menu Clicking “About SSL Soundscape Mixer” under the Help menu op ens the “About SSL Soundsca pe Mixer” window: Some essential information is displayed in this window: − The version number of the SSL Soundscape Mixer software.
Soundsca pe Mixpander Page 98 of 109 10. Troubleshooting Hardware installation problems Several problems relating to the insta llation of PCI cards are listed below.
Soundsca pe Mixpander Page 99 of 109 High speed SCSI cards High performance SCSI cards like the Adaptec AHA-2940UW or other Ultra-Wide SCSI host adapters can block the PCI bus becaus e of the high data rate, which may cause audio interruptions or clicks.
Soundsca pe Mixpander Page 100 of 109 Error status indications Processing Overrun (PO) When the Mixer’s DSP power requirement exceeds av ailable resources, a Processing Overrun (PO) indication will .
Soundsca pe Mixpander Page 101 of 109 Index 4 4 in - stereo out mixer columns ............................................................................................... ....................33 A ADAT A, ADAT B, ADAT C (Master Clock) ..............
Soundsca pe Mixpander Page 102 of 109 D Delete tool ................................................................................................................... ....................................19 Disclaimer .................................
Soundsca pe Mixpander Page 103 of 109 H Hardware installation problems ................................................................................................ .................98 Help Menu .....................................................
Soundsca pe Mixpander Page 104 of 109 Additional information regarding VS T/VSTi plug-in compatibility .................................................72 Assignable inputs/outputs ......................................................................
Soundsca pe Mixpander Page 105 of 109 Sample delay line ............................................................................................................. .........................58 Sends ...................................................
Soundsca pe Mixpander Page 106 of 109 P Pan ........................................................................................................................... ........................................16 Passwords (Settings Menu) ..............
Soundsca pe Mixpander Page 107 of 109 Save Settings ................................................................................................................. .............................96 Specific hardware settings ..........................
Soundsca pe Mixpander Page 108 of 109 Error status .................................................................................................................. ...............................86 Full Column Size ..................................
Soundsca pe Mixpander Visit SSL at URL: http://www.solid-state-logic.com © 2007 Solid State Logic All Rights reserved under International and Pan-American Copyright Conventions Solid State Logic, SSL.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Solid State Logic Soundscape Mixer è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Solid State Logic Soundscape Mixer - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Solid State Logic Soundscape Mixer imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Solid State Logic Soundscape Mixer ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Solid State Logic Soundscape Mixer, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Solid State Logic Soundscape Mixer.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Solid State Logic Soundscape Mixer. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Solid State Logic Soundscape Mixer insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
