Manuale d’uso / di manutenzione del prodotto PA1-10R-32 del fabbricante Soleus Air
Vai alla pagina of 18
© 2008 Soleus Air International Port able Air Conditioner , Heat Pump Heater , Dehumidifier , Fan, & HEP A Air Purifier P A1-10R-32 Operating Instructions Model No.
Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you with valuable informati on necessary for the proper care and main tenance of your new product.
SPEC IFICA TIONS • The cooling capacity is m easured at an am bient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consum ption is m easured when t he fan runs at the highest speed setti ng.
PRODUCT DIAGRAM (Actual product design may differ slightly from images below) 4 FRONT A. Control panel B. Air outlet C. Casters D. Power Cord & Plug E. Drain Plug F. HEPA Air Filter Storage BACK A. Hot air outlet grill B. Lower air inlet grill C. HEPA Air Filter Holder D.
INST ALLA TION 5 SELECTING THE LOCATION Place the unit in a flat location where the air out- lets are not obstructed. Place the unit at least 20” (50cm) away from a wall or other obstacle. MOUNTING THE EXHAUST HOSE Slide the square end of the exhaust duct over the hot air outlet on the back of the unit.
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detec tion and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the lo ad side and a LCDI attachm ent plug on the line side.
WINDOW KIT INSTALLATION The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. However, it may be necessary to modify some aspects of the installation process for certain window types.
WINDOW KIT INST ALLA TION (cont’d) 8 NOTE: The Portable Air Cond itioner above may differ from the unit de scrib ed in this manual. The above direction s and images show general directions for all Soleus Air single hose portable air conditioners.
CONTROL P ANEL, DISPLA Y , & OPERA TING INSTRUCTIONS CONTROL PANEL & MULTI-COLOR DISPLAY TEMP AND TIMER INDICATOR OSCILLATION ON/ BUCKET FULL SLEEP MODE ON COMPRESSOR ON 9 TIMER OFF MULTI-COLOR DISPLAY AUTO A/C DEHUM.
OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on.
6) Select the desired fan speed by pressing the SPEED button. NOTE: During hot days, the unit will cool the room most efficiently by setting the te mperature at the lowest setting and the fan speed on high.
Auto Mode 1) Install the exhaust hoses and wi ndow kit properly (see pages 7 & 8). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the POWER button on the control panel. 4) Press the MODE button until the “ ” icon appears on the control panel disp lay.
13 AIR PURIFIER FUNCTION The PA1-10R-32 is equipped with a HE PA air purification mode. This mode is only available when the HEPA air filter has been inserted into th e Air Filter Holder. Please no te, when the air filter is inserted into the air cleaner, the PA1-10R-32 will ONLY operate in air purifier mode.
OPERA TING THE UNIT USI NG THE REMOTE CONTROL 14 REMOTE CONTROL TIMER ON TIMER OFF LCD DISPLAY POWER BUTTON MINUTE SELECTER SLEEP BUTTON HOUR SELECTER TEMP SETTING MODE BUTTON FAN SPEED SWING (LOUVER .
15 REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER ( I/O ) button on to turn the unit on or off When you press the POWER button (when turning the unit on) the upper right square on the remote control LCD Display will light up.
Emergency Condensate Holding Tank When the room temperature is low and the indoor hum id ity is high, the air conditioner may not be able to evaporate some of the moisture fast enough. W hen this happens, the water will accumulate in an emergency condensate tank inside the unit.
MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an el ectrical outlet prior to performing any maintenance on the unit. Clean or replace particulate air filter (Black Mesh Filte r) - If the air filter is block ed with a dust, the air- flow volume may reduce.
W ARRANTY One Year Limited Warranty Soleus International Inc. warrants the ac companying Soleus Air Portable Air Cond itioner to be free of defects in mate- rial and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Soleus Air PA1-10R-32 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Soleus Air PA1-10R-32 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Soleus Air PA1-10R-32 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Soleus Air PA1-10R-32 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Soleus Air PA1-10R-32, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Soleus Air PA1-10R-32.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Soleus Air PA1-10R-32. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Soleus Air PA1-10R-32 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
