Manuale d’uso / di manutenzione del prodotto LT145H38GBV del fabbricante Snapper
Vai alla pagina of 44
Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES G MODELS HYDROSTATIC DRIVE LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GBV MODEL NUM BER EXPLA NA T ION LT 145 .
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, deflect ors, switches, b lade controls an d other safety dev ices frequently for proper oper ation and location.
4 TABLE OF CONTENTS IMPORTA NT SA FETY INSTRUCT IONS .......... 2 - 3 TA BL E OF C ONT ENT S ........................................ 4 SEC TION 1 - FA MILIA RIZA T ION ......................... 5 Compone nts ..........................................
5 Section 1 - FA MILIA RIZA TION COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the com ponents and their operation BEFO RE OPERATING.
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires .
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets.
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 ST A RTING & OPERA T ION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shif t speed control lever to neutra l. 2. Start engine. Ref er to Section “ST ARTING ENGINE” . 3. Release c lutch/brake pedal. 4. Slowly shift speed contr ol lever forward for forward m otion or to the rear f or reverse m otion.
9 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STO PPING MO WER BLADE 1. Stop mower blade by moving blade engagem ent lever down to the "OFF" position. See F igure 2.11. FIGURE 2.11 WA RNING Once blade is disengaged, it s hould come to a complete stop in 5 seconds or less.
10 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. W ith engine "OFF", m ove to rear of tr actor. 2. Pull the roll r elease control all the way out to disengage the hydro transmis sion.
11 Section 2 - OPERA TING INSTRUCTIONS 2.7. REVERSE LOCKOUT M ECHA NISM Data indicates that tragic back-over accidents occ ur each year. Thes e accidents us ually involve unsupervised children.
12 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the T ractor, use genuine SNAPPER replacem ent parts only . Contact a loc al SNAPPER dealer for parts and service ass istance. For the corr ect part or inform ation f or a par ticular Tr actor, alway s mention the m odel and ser ial number .
13 Section 3 - MA INTENA NCE 3.2.3. CHECK MOWER BLA DE (Continued) FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. W ith engine "OF F", move blade engagem ent lever to "ON". 2. Measur e blade cable extension spr ing. Spring should extend 1" +/-1/8" f or proper belt tens ion.
14 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION 1. Front Wheel Bearings Lubricate each f ront wheel bearing through the grease f itting on w heel hub. Using general purpose grease in a greas e gun, add grease until grease purges f rom bearing.
15 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION (Continued From Pre vious Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a sm all amount of SAE30 oil. See Figure 3.10. FIGURE 3.10 8. Blade Eng agement Mech anism Using SAE30 oil, lubricate the blade engagem ent me chanism pivot points, which are located on the R.
16 Section 3 - MA INTENA NCE 3.4 SERVICE - A NNUA LLY 3.4.2. FUEL FILT ER (Continued From Pre vious Page) 3. Install new fuel filter par t number 1-4359. See Figure 3.14. FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Ref er to engine owner's m anual for fuel s pecifications .
17 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
18 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP eng ine. Set brake. Remove key. Remove spark plug wire f rom spark plu g and secure w ire away from spark plug.
19 Section 4 - A DJUSTMENT & REPA IR 4.2.4. A D JUSTING M OWER BLA DE – 33” DECK (Continue d from previous page) FIGURE 4.5 WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine.
20 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
23 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
24 Section 4 - A DJUSTMENT & REPA IR 4.3.4. TRA CTION DRIVE BEL T A DJUSTM ENT Should a gradual loss of traction be noticed, it m ay be necessar y to adj ust the traction drive belt tension. Adjust as follows: 1. Move tr actor to a firm , level surfac e.
25 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
26 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
27 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
28 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
29 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
30 Section 4 - A DJUSTMENT & REPA IR 4.5 BA T TERY 4.5.1. BA T TERY REM OVA L 1. Raise oper ator's seat. 2. Rem ove the two adjusting knobs . 3. Rem ove seat assem bly and m ove forward. Use care not to disc onnect wires from seat switch. See Figure 4.
31 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! DO NO T attempt to service or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded.
32 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER Series F LAW N T RACTOR c an be equipped with a variety of ac cessories that increase its ver satility . T he acces sories available for each model ar e listed in the c hart below.
33 SECTION 5 - ELECTRICA L SYSTEM SCHEMATIC – WIRING HARNESS P.N. 2-6616 LT145H33G BV & LT145H38GBV SCHEMATIC – WIRING HARNESS P.N. 7-3998 LT150HG 38KV.
34 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact.
35 TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Tractor Will Not Move Or L oss Of Traction 1. Speed control handle in the neutral “ N” position. 1. Place speed contr ol in desired speed. 2. Roll release contr ol in “ROLL” position.
36 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page 12 X.
37 3 YEA R LIMITED WA RRA NTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SNAPPER , through any authorized SNA PPER dealer will repl.
38 PRIMARY MA INTENA NCE.
39 PRIM A RY M AINTENA NCE.
40 PRIMARY MA INTENA NCE.
41 PRIMARY MA INTENA NCE.
42 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
43 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
44 Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES G IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissi ons information and cr itical safety warnings.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Snapper LT145H38GBV è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Snapper LT145H38GBV - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Snapper LT145H38GBV imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Snapper LT145H38GBV ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Snapper LT145H38GBV, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Snapper LT145H38GBV.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Snapper LT145H38GBV. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Snapper LT145H38GBV insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
