Manuale d’uso / di manutenzione del prodotto VP6342 del fabbricante SMK-Link
Vai alla pagina of 16
Page 1 User’s Manual V ersaPoint R echargeable Wireless Media K eyboar d.
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certication The term “IC” before the certication/registration number only signies that the Industry Canada technical specications were met.
Page 4 System Requirements Hardware: Desktop or notebook system with 2 available USB ports 1 for receiver dongle, 1 for charging Operating System: W indows 2000, XP , V ista or W indows 7 Package Contents 2.4GHz rechargeable wireless media keyboard 2.
Page 5 light located under the translucent scroll wheel. (See Fig. 1) 2. Please familiarize yourself with the various indicators below (See Fig 2.) Pairing of RF When receiver dongle is successfully paired up with the keyboard LED lights up for approx.
Page 6 Installing Batteries Remove the battery cover located at the bottom of the keyboard. (See Fig. 3) Insert the two supplied AAA rechar geable Ni-MH batteries (included in the package) into the battery compartment. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment.
Page 7 Charging the batteries Do not attempt to charge non-rechar geable disposable Alkaline batteries. The batteries may leak and damage your keyboard. Use only the rechargeable Ni-MH batteries supplied. Shall replacing batteries become necessary use only rechargeable Ni-MH batteries.
Page 8 It’ s recommended that you fully char ge the batteries before initial use; nevertheless it’ s ready for set up (see next step) anytime during charging. Connect the mini USB connector of the charging cable (included in the box) to the keyboard’ s mini USB port.
Page 9 Pairing the Ke yboar d to the Receiver Dongle Make sure the computer ’ s power management is set to disable hibernation mode while the product is being charged. (Go to Control Panel, Power Options, select “Hibernate” from the tabs and uncheck the box marked “Enable Hibernation.
Page 1 0 The radio frequency (RF) codes are factory preset for your convenience; the keyboard should already be paired up with the receiver at this point. Just connect the receiver dongle to the PC’ s USB port and wait for the OS to install the default driver in the background.
Page 11 1. Plug the mini USB connector of the USB adapter (included in the box) to the mini USB port on the keyboard. (See Fig. 6-1) 2. Connect the RF USB receiver dongle to the USB adapter while the adapter is plugged into the keyboard.
Page 12 that the RF is successfully connected. Caution: the auto- pairing is taking place while the keyboard and the receiver are physically connected; do not remove the receiver dongle prematurely before the LED light turns red. (See Fig. 6-2) 3. Remove the receiver from the adapter , plug the receiver to the PC’ s USB port.
Page 13 Operating Instructions This keyboard features the standard QWER TY conguration plus 8 convenient one-touch hot keys for Internet launch and media player controls. (See Fig. 8) 1. T rackball / W ake up T rackball: controls cursor movements similar to mouse functions.
Page 1 4 2. Scroller / Power-low Indicator LED: scrolls the screen up and down; same as the scroll wheel in a traditional mouse. Also doubles as power -low indicator: when scroller ashes with red LED light it’ s an indication that batteries need recharging.
Page 15 W arr anty SMK-LINK warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase.
Page 1 6 contact information can be found on SMK-LINK website: http://www .smklink.com/support/contactsupport.html. This warranty does not affect your statutory right and you may also have other rights which vary from state to state.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SMK-Link VP6342 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SMK-Link VP6342 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SMK-Link VP6342 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SMK-Link VP6342 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SMK-Link VP6342, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SMK-Link VP6342.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SMK-Link VP6342. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SMK-Link VP6342 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
