Manuale d’uso / di manutenzione del prodotto SMC8013WG del fabbricante SMC Networks
Vai alla pagina of 40
EZ Connect ™ Wireless Cable Modem Gateway Install Guide SMC8013WG.
Copyright Information furnished by SMC Network s, Inc. (SMC) is believed to be accura te and reliable. However, no responsibility is assumed by SMC fo r its use, n or for any infringements of patents or other rights of third parties which may resu lt from its use.
TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know th e Wireless Cable Modem Gateway LED Indicators Rear Panel Descripti.
CHAPTER 1 | Introduction Congratulations on your purcha se of the EZ Connect™ Wireless Cable Modem Gateway. SMC is proud to provide you with a powerful yet simple co mmunication device for connecting your local area network (LAN) to the Internet. 1.
1.2 | Package Contents Before installing the EZ Connect™ Wireless Cable Modem Gatew ay , verify that you have the items listed under below. Also be sure that you have the necessary cabling. If any of the ite ms are missing or damaged, conta c t your local SMC distributor.
CHAPTER 2 | Getting to Know the Wireless Cable Modem Gateway The EZ Connect™ Wireless Cable Modem Gateway is the perfect all in one solution, for the home or business environment.
2.2 | Rear Panel Description Item Description Power Connect the included power adapter to this port. Reset Use this button to reset the power or restore the default factory settings. LAN 1-4 Four 10/100 Auto-sens ing switch po rts (RJ-45). Connect devices on your local area network to these ports (s uch as a PC, hub, or switch).
CHAPTER 3 | Installation The EZ Connect™ Wireless Cable Modem Gateway can be installe d in any location where you have cable internet access, and the cable inte rnet service provider has approved the EZ Connect™ Wireless Cable Modem Gatew ay. To confirm you meet these 2 criter ia points, please contact your local ISP.
3.2 | Basic Installation Procedure 1. Connect the LAN: You can connect the Wireless Cable Modem Gateway to your PC, or to a hub or switch. Run Ethernet cable from one of the L AN ports on the rear of the Wireless Cable Modem Gateway to your computer’s network adapter or to another network device.
CHAPTER 4 | Configuring your Computer The information outlined in this chapte r wi ll guide you through the configuration for the following Operating Systems: • Windows 95/98 • Windows Me • Windows 2000 • Windows XP • Apple Macintosh 4.1 | Configuring Windows 95/98/Me 1.
4.2 | Configuring Windows 200 0 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel] 2. In the Control Panel, locate and double- click the [Network and Dial-up Connections] icon 3. Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is connected to the Gateway.
4.3 | Configuring Windows XP The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previo us Windows versions), please follow the instruct ions for Windows 20 00 outlined above.
CHAPTER 5 | Configuring the Wireless Cable Modem Gateway After you have configured TCP/IP on a client computer, use a web browser to configure the EZ Connect™ Wireless Cable Modem Gateway. The Gateway can be config ured by any Java- supported browser including Internet Explorer 5.
5.3 | Accessing the Wireless Cable Modem Gatewa y’s Web Management To access the Wireless Cab l e M odem Ga teway’s web-based management screens, follow the steps below: 1. Launch your web-browser. NOTE : Your computer does not have to be ON LINE to configure the Wireless Cable Modem Gateway.
CHAPTER 6 | Navigating the Web-based Administration The EZ Connect™ Wireless Cable Modem Gatewa y’s management interface allows you to configure both basic and advanced features an d options.
6.4 | LAN From this section you can conf igure the following settings: • The private LAN settings, including the IP address of your Wireless Cable Modem Gateway • The IP Address Pool ran ge for DH.
IP Address Pool A dynamic IP start address may be specified by the user, e.g. 10.1.10.1 (defaul t value). Once this start IP address has been assigned, IP addresses running from 10.1.10.10 to 10.1. 10.199 will be part of the dynamic IP address pool. I P addr esses from 10.
Predefined Service The Predefined Service option has a pul l-down menu with several popular Servi ce Appl ications, such as HTTP (80), FTP (20/21), and AIM/ICQ (5190). To configure the virtual server for a Predefined Service, follow the steps below : 1.
2. Configure the Traffic or Da ta [T ype] that you want to forward 3. Set the [LAN Server IP] of the PC that you want this traffic/data r edirected to 4. You can also configure [Re mote IPs] option to allow acce ss to th is specific port fro m the WAN side.
6.7 | Firewall The Wireless Cable Modem Gateway pro vide s a stateful inspection firew all (SPI), which is designed to protect against Deni al of Service (DoS) attacks when activated. Its purpose is to allow a private local area network (LAN) to be se curely connected to the Internet.
Configuring a Predefined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the Predefined Section, click on the [Add] button 3. On the next page, select the service that you want to block from the pull-down menu 4.
Configuring a Customer Defined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the Customer Defined Section, click on the [Add] button 3. On the Customer Filter Configurati on p age, define a Name for the service/ap plicat ion that you want to block.
6.7.2 | Special Application Some applications, such as Internet gaming, vi deoconferencing, Internet telephony and others, require multiple connections. To access the Speci al Applicatio n configuration page, on the Si de Navigation bar, click on [Firewall] link and then click on the [Special Application] link.
8. When your configuration is complete, click the [Apply] button to save your changes and return to the main Special Application page. 6.7.3 | URL Blocking This section allows you t o control the content ne twork. This feature is good for both business and parents looking to con t rol the cont ent accessible from a web browser.
6.7.4 | Schedule Rule This feature will block Internet content based on the URL blocking function f or PCs on your network based on the day and or time.
6.7.6 | DMZ Host (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can open the client up to unrestricted two-way Internet access. Enter the IP address of a DMZ host to th is s creen.
6.9 | Status The Status screen displays WAN/LAN connect ion status, firmware, and hardwa re version numbers, illegal attempts to ac cess your network, as well as information on DHCP clients connected to your network.
The Cable Modem System Event Log sh ows diagnostic informati on about your connection and cable system. The Cable Status page shows the users the in itialization proce ss the SMC8013W G has been through, and also includes the informat i on ab out the downstream channel and the upstream channel the modem is connected on.
APPENDIX A | CLI Commands Command PING: "ping IP/FQDN x" Description: Pings the destination by IP or FQDN (full qualify domain name, e.g. www.yahoo.com ) for x times. Command TRACERT: "tracert IP/FQDN" Description: Trace the path to the destination IP or FQDN.
Command SNIFF: "sniff [u|d|u+d] x [0|1]" Description: Sniff the upstream/downst ream/upstream & downst ream for x seconds and display them by original sn iff ing format (for 0) or Comcast’s format (for 1). Command NATSHOW: "natShow" Description: Display the existing NAT session log in the CM.
Command ARP: "arp <[ether|cable]> <IP>" Description: If there is no parameter sp ecif ied for the ARP command, CM would display the current sys ARP table.
Command DHCPSHOW: "dhcpShow" Description: This command is used t o show the current dhcp lease info, including the I P, MAC and status (online/expired/released) of the pr ivate LAN. There is no parameter for this command. It will show the IP, MAC, and on-line for lease that renewed, released, and expired successfully.
APPENDIX B | Troubleshooting This appendix describes common p roblems you may encounter an d pos sible solutions to them. B.1 | Verify you are connected to the Wireless Cable Mode m Gateway If you are unable to access the Gateway’s web- based administration pages, then you may n ot be properly connected or configured.
B.3 | I have another IP Address displayed If you have another IP address listed, then the PC may not be configured for a DHCP connection. Please refer t o Chapter 4 | Config ure your Comput er for in formation. Once you have confirmed your computer is conf igured for DHCP, then please follow the steps below.
B.4 | Pinging the Wireless Cable Modem Gatew ay To verifying Your TCP/IP Connect ion is configur ed properly and you are able to access the Wireless Cable Modem Gateway’s web-based ma n agement screens – you can use the ‘Ping’ command in DOS. To access the DOS dialog w indow please follow the steps below: 1.
B.5 | Symptom / Action Troublesho oting The Gateway can be easily monitored t hrough pa nel indicators to identify problems. Please refer to Chapter 2 – Section 2.
APPENDIX C | Technical Specifications Standards • 802.3 10BaseT Ethernet • 802.3u 100BaseTX F ast E t h ernet • 802.11b WAN Interface • F-type RF Connector LAN Interfaces • 4 – 10BASE-T/100BASE-TX RJ-45 ports • 1 – USB 1.1 Type B Connector • 1 – 801.
APPENDIX C | Compliances FCC Interference Statement This equipment has been tested and found to comp ly with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against radi o interference in a comme rcial environment.
APPENDIX D | Technical Support PHONE From U.S.A. and Canada (24 hours a day, 7 days a week) • (800) SMC-4-YOU • (949) 679-8000 • Fax: (949) 6 79-1481 From Europe (8:00 AM - 5:30 PM UK Time) • 44 (0) 118 974 870 0 • Fax: 44 (0) 118 974 8701 INTERNET E-mail addresses: • techsupport@smc.
SMC Networks, Inc. 38 Tesla Irvine, CA 92618 Rev. 1.0 – Comcast User SMC8013WG.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SMC Networks SMC8013WG è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SMC Networks SMC8013WG - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SMC Networks SMC8013WG imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SMC Networks SMC8013WG ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SMC Networks SMC8013WG, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SMC Networks SMC8013WG.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SMC Networks SMC8013WG. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SMC Networks SMC8013WG insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
