Manuale d’uso / di manutenzione del prodotto 191D-20 Industrial del fabbricante Singer
Vai alla pagina of 45
High Speed Straight L oc kstitc h S ewing Mac hine Instr uction Manual and P ar ts List ® Singer is a registered trademark of The Singer Company Limited or its affiliated companies.
Cont ents 1 Safety Instructions 1 1 .1 Important S afety Instructions 1 1 .2 Safe Operation 2 2 Product Description and Mac hine Specification 3 2.1 Product Description 3 2.2 Mac hine Specification 4 2.3 Motor , Motor Pulley and V -Belt Specifications 4 3 Setup and Adjustment Instructions 5 3.
Cont ents 6 P arts List 23 6.1 Frame and Co ver Components 24 6.2 Arm Shaf t and Thread T ak e-Up Lever Components 26 6.3 Needle Bar , Upright Shaft and R otating Hook Driving Shaft Components 28 6.4 Presser F oot Components 30 6.5 Feed Mec hanism Components 32 6.
1 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t Saf ety Instr uctions 1 .
2 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t • T o avoid the risk of electric shoc k, do not open the motor wiring box and do not touc h the components assembled inside the wiring box.
3 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t High Speed Straight Loc kstitc h Sewing Machine Pr oduct Descr iption and Mac hine Specification 2.
4 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 2.2 2.3 Mac hine Specification Mot or , Mot or Pulle y an.
5 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t Set up and Adjustment Instr uctions 3.1 T able Cut-Out Dr awing Figure 1 535 200 480 115 + 1 - 0 95 206 28 108 68.
6 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t Oil Reserv oir Installation 3.2 The oil reservoir should rest on the four corners of the mac hine table groove.
7 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.3 Belt Co ver and Bobbin Winder Installation F or saf et y , the belt cov er should be installed.
8 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.5 Thr ead T ak e-up Lev er Oil Supply A djustment Adjust the amount of oil supplied to the thread tak e-up and needle bar crank ‘2’ by turning adjusting pin ’1’ (Figure 8).
9 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.6 Rotating Hook Oil Supply A djustment Unused mac hine should run idle for 3 minutes (Moderate intermit tent operation).
1 0 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.7 Needle At tac hment T u rn th e h an d wh e e l u n ti l th e n e e - d l e b a r re a c h e s t h e h ig h e s t p o in t of i t s s t ro k e ( F ig u re 1 2 ) .
1 1 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.8 3.9 Bobbin Case At tac hment Mac hine Thr eading Fix the bob bin into bob bin cas e wit h tha t th e th rea d ope n en d is dir ect ed to the le f t a s ob ser ved fr om y ou.
12 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.1 0 3.
13 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.12 Thr ead T ak e-Up Spr ing A djustment The adjustment of the strok e of the thr ead tak e-up spr ing (Figur e 1 8) Loosen set ting screw ‘2’ .
1 4 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.13 3.14 Knee Lif t er Height A djustment Pr esser F oot Lif ter A djustment When using the knee lifter , the standard height of presser foot is 1 0 mm.
15 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.15 Pr esser F oot Pr essur e A djustment Loosen the nut.
16 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.16 F eed Timing A djustment Loosen screws ‘2’ and .
17 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.1 7 F eed Dog Height A djustment When the feed dog ‘ .
18 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.1 8 Needle t o Rotating Hook Relation A djustment Adjusting the height of the needle bar (Figur e 27) T urn the handwheel until the nee- dle bar has been at the lowest point, loosen the setscrew ‘1’ .
1 9 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.1 9 Pr esser Bar Height A djustment Loosen setscrew ‘1’ (Figure 28) and adjust the height of the presser bar .
20 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 3.20 Thr ead T ak e- Up Str ok e A djustment When sewing .
21 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t Maint enance 4 4.1 4.2 4.3 Mac hine Head Cleaning Lubr ication Saf ety Inspection Clean the mac hine periodically with a soft and dry cloth to remove the excess of dust on the mac hine head.
22 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t T r oubleshooting Problems Possible Causes Possible S olutions Needle break 1 . Needle is installed wrong 1 .
23 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t P ar ts List.
24 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.1 F rame and Co ver Components 1 1 0 10 1 034 Face plat.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 25 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6 1 .
26 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.2 Ar m Shaft and Thr ead T ak e-Up Lever Components.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 27 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 1 1 0 1260 0 1 Thread take-up crank shaft 1 1 1 1 1 1 2 1 0 1S150 0 1 S crew SM15/64 x 28 L=1 0.
28 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.3 Needle Bar , Upr ight Shaft and Rotating Hook Dr iving Shaft Components No.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 29 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.3 Needle Bar , Upr ight Shaft and Rotating Hook Dr iving Shaft Components 9 1 0 1S1 1 0 06 Screw SM 1/8 x 44 L=4.
30 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.4 Pr esser F oot Components.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 31 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 1 1 0 1 1 100 1 Hand lifter 1 1 1 1 1 1 2 1 0 1S1 1 0 1 0 Screw SM9/64 x 40 L=9.
32 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.5 F eed Mechanism Components No.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 33 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.
34 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.6 Lubr ication Components.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 35 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.
36 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.7 Oil Reserv oir Components.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 37 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.
38 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.8 Belt Co ver , Bobbin Winder and Thr ead Stand Compone.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 39 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.
40 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.9 Mac hine A ccessor ies.
No. Par t No. Description Qty . 20 20C 30 30C 70 70C 41 H i g h S p e e d S t r a i g h t L o c k s t i t c h S e w i n g M a c h i n e | I n s t r u c t i o n M a n u a l a n d P a r t s L i s t 6.
P/N 364331 -0 0 1 ® Singer is a registered trademark of The Singer Company Limited or its affiliated companies. © 20 08 Copyright The Singer Company Limited Rev 0 - J an.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Singer 191D-20 Industrial è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Singer 191D-20 Industrial - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Singer 191D-20 Industrial imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Singer 191D-20 Industrial ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Singer 191D-20 Industrial, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Singer 191D-20 Industrial.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Singer 191D-20 Industrial. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Singer 191D-20 Industrial insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
