Manuale d’uso / di manutenzione del prodotto SX-3700WB del fabbricante Silex technology
Vai alla pagina of 14
2-1 Users Manual SX2 PRICOM SX-3700WB 2. PRICOM SX-3700WB This product is a wireless USB device server that will serve USB type peripheral equipment (a printer, scanner etc.). By using the bundled PRICOM Monitor SX, it is possible to view the state of the connected printer via a network.
2-2 Users Manual SX2 PRICOM SX-3700WB Environment The following are needed for this product. The followings are objects that connect to the network. - PC with wireless communication - USB Cable (A-B Type Connectors) - Printer, Scanner etc.
2-3 Users Manual SX2 PRICOM SX-3700WB Equipment explanation Part name and function <Top/Front Side> The LEDs have the following meaning: Infra LED (Green) Lights when an Infra. mode network connection is established. Link LED (Green) Lights when an OldAdHoc mode network connection is flashed.
2-4 Users Manual SX2 PRICOM SX-3700WB - Do not turn off the power to this product while it is initializing to factory default. - When this product is turned on again after factory default is completed, do not push the pushbutton switch.
2-5 Users Manual SX2 PRICOM SX-3700WB < Put into infrastructure mode > 1. Please verify that AC adapter is connected and that this product has started normally. 2. Push and hold the push switch down. Continue to hold down the push switch for about 5 seconds.
2-6 Users Manual SX2 PRICOM SX-3700WB 4. Make sure that printer is working and turned on. - Using an AC adapter other than the one provided with this product can cause damage. - Wait for 2 or more seconds after connecting/disconnecting the USB cable. - Do not disconnect the USB cable during printing, scanning or reading/writing from a memory card.
2-7 Users Manual SX2 PRICOM SX-3700WB Other Functions The following describes of the other functions of this product. Function Assign the IP address automatically using DHCP, BOOTP and RARP - DHCP/BOOTP If a DHCP/BOOTP server is working on your network, the DHCP/BOOTP protocol of this product will assign the IP address to this product.
2-8 Users Manual SX2 PRICOM SX-3700WB - Scanner server If you use a USB device, this product will allow you to share the scanner via the bundled PRICOM USB Utility. - The PRICOM USB Utility is compatible with Wndows2000/WindowsXP - This product can connect to one scanner.
2-9 Users Manual SX2 PRICOM SX-3700WB Specification Hardware Specification CPU 32bit RISC CPU Memory RAM :8MByte FlashROM :1MByte Network Interface IEEE802.
2-10 Users Manual SX2 PRICOM SX-3700WB Software Specification Supported Protocol: TCP/IP, NetBEUI/NetBIOS, AppleTalk TCP/IP: Network Layer: ARP, RARP, ICMP, IP, IPv6, ICMP6 Session Layer: TCP, UDP App.
2-11 Users Manual SX2 PRICOM SX-3700WB This product operates at 2.4GHz No radio license is required to use this product. Take note of the following points. Do not use next to the following. - Microwave, scientific instruments, pacemaker or other medical equipment.
2-12 Users Manual SX2 PRICOM SX-3700WB Wireless Equipment for 2.4GHz band This band of equipment is used by the microwave, industry, science, medical equipment and licensed in room or low power (non licensed)radio stations. - Before you use this equipment, verify that it will not interfere with other broadcasting.
2-13 Users Manual SX2 PRICOM SX-3700WB The PC connects directly to our product in AdHoc mode. <AdHoc mode> Each wireless product connects directory.
2-14 Users Manual SX2 PRICOM SX-3700WB <Infrastructure mode> In Infrastructure mode this product connects through an access point. An Access point allows communication between wired and wireless environments. Connect this product to the USB device using a USB cable.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Silex technology SX-3700WB è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Silex technology SX-3700WB - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Silex technology SX-3700WB imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Silex technology SX-3700WB ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Silex technology SX-3700WB, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Silex technology SX-3700WB.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Silex technology SX-3700WB. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Silex technology SX-3700WB insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
