Manuale d’uso / di manutenzione del prodotto XV-Z7000E del fabbricante Sharp
Vai alla pagina of 48
1 Important Information IMPOR T ANT For your assistance in reporting the loss or theft of your Colour LCD Projector , please r ecor d the Serial Number located on the bottom of the projector and r etain this infor mation.
2 Important Information WARNING: The cooling fan in this projector continues to run for about 90 seconds after the pr ojector is turned off. During normal operation, when tur ning the power off always use the ON/OFF button on the pr ojector or the PO WER button on the remote contr ol.
3 Important Information Impor tant Safeguar ds A TTENTION: Please read all of these instructions before y ou operate y our LCD Projector for the fir st time .
4 Important Information Outstanding Features 1. WIDESCREEN IMA GES Allows projection of DVD, DTV and other anamorphic images r ecorded in widescreen format with a 16:9 aspect ratio. (Page 31) 2. BRIGHTNESS SWITCHO VER FUNCTION Function with toggle switch to control the quantity of pr ojected light.
5 Important Information Important Information Contents Important Safeguards …………………………… 3 Outstanding Features …………………………… 4 Contents ………………….
6 Important Information Usage Guidelines T emperature Monitor Function If the projector starts to overheat due to setup problems or a dirty air filter , “ TEMP .
7 Important Information P ar t Names PICT MODE/ENTER button Pr ojector Numbers next to the part names refer to the main pages in this manual wher e the topic is explained.
8 Important Information Front Vie w P ar t Names T op Vie w Remote Contr ol VOL POWER MUTE BACK MENU ENTER RGB/ COMPONENT INPUT 1 PICT MODE AUTO SYNC INPUT 2 GAMMA KEYSTONE VIDEO FREEZE S-VIDEO CLR TE.
9 Important Information P ar t Names Attaching the Rubber Leg Tips The rubber leg tips are pr ovided to prevent the r emote control fr om skidding and shaking over a flat sur face. P ositioning the Remote Contr ol The remote contr ol can be used to control the projector within the ranges shown below .
10 Setup & Connections Setup & Connections Supplied Accessories Remote contr ol T wo AAA size batteries Power cord For Europe, Hong Kong and Singapor e For Australia, New Zealand, and Oceania (For Europe, except U.
11 Setup & Connections Connecting the Pr ojector Connecting the P ower Cor d Plug the supplied power cord into the AC socket on the back of the pr ojector .
12 Setup & Connections Connecting the Projector INPUT 2 N ENT AUDIO INPUT RGB /COMPONENT P R (INPUT 1, 2) RS-232C INPUT 1 INPUT 2 /COMPONENT AUDIO INPUT RGB /COMPONENT C R C B Y (INPUT 1, 2) Conne.
13 Setup & Connections Connecting the Projector Connecting other compatible computer s When connecting the pr ojector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Mac- intosh (i.e. Workstation), a separate cable may be needed.
14 Setup & Connections RS-232C INPUT 1 /C O P B Y Connecting RS-232C P or t When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cr oss type, sold separately), the computer can be used to contr ol the projector and check the status of the projector .
15 Operation Operation Basic Operations 1 Make the necessary connections before pr o- ceeding. Connect the power cor d to a wall outlet. The POWER indicator illuminates red and the projector enters standby mode. • If the side filter cover is not securely installed, the POWER indicator flashes.
16 Operation Basic Operations Projector Remote control ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU PICT MODE VOL POWER MUTE BACK MENU ENTER RGB/ COMPONENT INPUT 1 PICT MODE AUTO SYNC INPUT .
17 Operation Position the projector perpendicular to the scr een with all feet flat and level to achieve an optimal image. Move the projector forwar d or backward if the edges of the image ar e distor ted. • The projector lens should be centr ed in the middle of the screen.
18 Operation Setting up the Screen Using the Adjustment Feet Y ou can adjust the height of the image by raising the projector with the foot releases. 1 Press the foot r eleases and lift the projector to the desir ed angle. (Adjustable up to approximately 7 ° fr om the standard position.
19 Operation Setting up the Screen Projector Digital K eystone Correction Remote control • When the image is distor ted due to the pr ojection angle, the digital keystone correction function allows you to correct it. • The digital keystone correction can be made by pressing KEYST ONE , or by setting “ Keystone ” correction in the GUI menu.
20 Operation Using the GUI (Graphical User Interface) Men u Screens Projector Remote control This pr ojector has three sets of menu scr eens (INPUT 1 or 2 (COMPONENT), INPUT 2 (RGB) and S-VIDEO or VIDEO) that allow you to adjust the image and various projector settings.
21 Operation Items on the INPUT 1 or 2 (COMPONENT) Mode Menu Bar Using the GUI (Graphical User Interface) Menu Screens Items on the INPUT 2 (RGB) Mode Menu Bar Main menu Main menu Sub menu Sub menu *1 “ Signal T ype ” does not appear when the INPUT 1 (COMPONENT) mode is selected.
22 Operation *3 “ Tint ” does not appear when r eceiving “ PA L ” , “ SECAM ” , “ P AL M ” , “ P AL N “ or “ P AL (60Hz) ” in the S-VIDEO or VIDEO mode.
23 Operation Selecting the On-screen Displa y Language Projector (GUI) On-screen Display English is the preset language for the On-scr een Display . The language can be set to English, German, Spanish, Dutch, Fr ench, Italian, Swedish, Por tuguese, Chinese, Korean or Japanese.
24 Operation All image adjustment items are returned to the factory preset settings. Picture Adjustments Adjusting the Picture Y ou can adjust the projector ’ s picture to your prefer - ences with the following pictur e settings.
25 Operation Picture Adjustments Projector Remote Control Selecting the Signal T ype This function allows you to select the input signal type (RGB or COMPONENT) for INPUT 2 port. 1 Press MENU . 2 Press ∂ / ƒ to select “ Pictur e ” in INPUT 2 (RGB) mode, and then press ENTER .
26 Operation Computer Ima g e Adjustments (INPUT 2 (RGB) mode onl y) A uto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing A UT O SYNC .
27 Operation Computer Image Adjustments (INPUT 2 (RGB) mode onl y) Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), inter ference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen.
Useful Features 28 Useful Features Freeze Function This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you mor e time to explain the image to the audience.
Useful Features 29 Adjusting the Colour T emperature Remote contr ol This function can be used to adjust the colour temperature to suit the type of image input to the projector (video, computer image, TV br oadcast, etc.). Decrease the colour temperatur e to create warmer , reddish images for natural flesh tones.
Useful Features 30 • Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Three gamma settings ar e available to allow for differ ences in the images displayed and in the brightness of the room.
Useful Features 31 Selecting the Picture Displa y Mode Remote control This function allows you to modify or customise the picture display mode to enhance the input image. Depending on the input signal, you can choose the picture display mode pr eferred.
Useful Features 32 This function allows you to check the curr ent input signal information and the accumulated lamp usage time. 1 Press MENU . 2 Press ∂ / ƒ to select “ Options ” , and then press ENTER . The current input signal information and the lamp usage time will be displayed.
Useful Features 33 Selecting a Bac kgr ound Image This function allows you to select the image displayed when no signal is being sent to the pr ojector . Description of Bac kground Images 1 Press MENU . 2 Press ∂ / ƒ to select “ Options ” , and then pr ess ENTER .
Useful Features 34 Rever se/In ver t Ima g e Function This projector is equipped with a r everse/inver t image function which allows you to r everse or inver t the pro- jected image for various applications. Description of Pr ojected Images ON/OFF POWER LAMP TEMP.
35 Maintenance & T roubleshooting Air Filter Maintenance Maintenance & T r oub leshooting Air Filter Maintenance Right Side View Air filter • This projector is equipped with an air filter to ensur e the optimal operating condition of the pr ojector .
36 Maintenance & T roubleshooting Air Filter Maintenance 1 3 2 Remo ve the filter cover . 1 Remove the air filter stopper . 2 Remove the air filter . T ur n over the projector . Press the tab and remove the filter cover in the dir ection of the arrow .
37 Maintenance & T roubleshooting Lamp/Maintenance Indicator s Maintenance Indicators POWER LAMP TEMP. ON/OFF KEYSTONE • The warning lights on the projector indicate problems inside the projector .
38 Maintenance & T roubleshooting VOL POWER MUTE BACK MENU ON/OFF POWER Replacing the Pr ojection Lamp It is recommended that the lamp be r eplaced after approximately 900 cumulative hours of use or when you notice a significant deterioration of the picture and colour quality .
39 Maintenance & T roubleshooting Replacing the Pr ojection Lamp 1 Connect the power cord. Reset the lamp timer . Plug the power cord into the AC socket of the projector . Resetting the lamp timer 2 • Reset the lamp timer only after replacing the lamp.
40 Maintenance & T roubleshooting Using the K ensington Lock This projector has a Kensington Security Standar d connector for use with a Kensington Micr oSaver Security System. Refer to the information that came with the system for instructions on how to use it to secur e the projector .
41 Appendix Appendix Attaching the Lens Cap Put on the lens cap to prevent damage to the lens when transporting the pr ojector . A lens cap strap is provided to pr event the loss of the lens cap. 1 Attach the lens cap strap to the lens cap. 2 Attach the lens cap strap to the pr ojector .
42 Appendix Connection Pin Assignments INPUT 2 P or t: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 2. Video input (green/sync on gr een) 3. Video input (blue) 4. Not connected 5. Composite sync 6. GND (red) 7. GND (green/sync on gr een) 8.
43 Appendix PC contr ol A computer can be used to control the pr ojector by connecting an RS-232C cable (null modem, cross type, sold separately) to the projector . (See page 14 for connection.) Communication conditions Set the serial por t settings of the computer to match that of the table.
44 Appendix RS-232C P or t Specifications • If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
45 Appendix Horizontal Frequency: 15 – 80 kHz V ertical Frequency: 43 – 85 Hz Pixel Clock: 12 – 108 MHz Compatible with sync on green and composite sync signals SXGA (1,280 1,024) compatible.
46 Appendix Specifications Product type Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Component input signal Horizontal resolu.
47 Appendix RS-232C INPUT 1 INPUT 2 /COMPONENT AUDIO INPUT RGB /COMPONENT C R C B Y (INPUT 1, 2) 100-240V ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU PICT MODE VIDEO INPUT S-VIDEO INPUT AUDIO INPUT (S-VIDEO, VIDEO INPUT) LR FOCUS ZOOM 169.
48 Appendix Glossar y Active digital keystone correction Corrects keystone distortion caused when the projected image is not perpendicular to the scr een. This method provides not only horizontal corr ection, but ver tical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp XV-Z7000E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp XV-Z7000E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp XV-Z7000E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp XV-Z7000E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp XV-Z7000E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp XV-Z7000E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp XV-Z7000E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp XV-Z7000E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
