Manuale d’uso / di manutenzione del prodotto PNR603 del fabbricante Sharp
Vai alla pagina of 62
PN-R603 LCD MONIT OR OPERA TION MANUAL.
IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
3 E IMPORT ANT INFORMA TION W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE.
4 E Thank you for your purchase of a SHARP LCD product. T o ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product.
5 E SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specied batteries only .
6 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology . However , there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.
7 E MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specications is required. • Since the monitor is heavy , consult your dealer before installing, removing or moving the monitor .
8 E Supplied Components If any component should be missing, please contact your dealer . Liquid Crystal Display Monitor: 1 Remote control unit: 1 Cable clamp: 2 Cable clamp (stick-on):.
9 E n Front view 2 34 5 1 Accessing the operation panel 1. LCD panel 2. Remote control sensor (See page 15. ) 3. Input switch (See page 18. ) 4. Power switch (See page 16. ) 5. Power LED (See page 16.) TIPS • Use a pointed object such as a pen tip to press the switches.
10 E Part Names n Remote control unit 1 2 3 4 5 6 11 8 7 9 10 1. Signal transmitter 2. POWER button (See page 16.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) BRIGHT +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLA Y button (See page 18.
11 E 8 12 96 7 13 11 12 10 5 3 4 Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected.
12 E Connecting Peripheral Equipment 8. DisplayPort output terminal • The video of the DisplayPort input can be output to an external device. • Use a commercially available DisplayPort cable. • Outputting HDCP-encrypted video requires an external device which supports HDCP .
13 E Connecting the Power Cord Caution • Use only the power cord supplied with the monitor . 1. T urn of f the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet.
14 E Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable clamp Cable Cable clamp attachment * Do not cover the vents.
15 E Preparing the Remote Control Unit Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow . 2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly .
16 E Caution • T urn on the monitor rst before turning on the PC or playback device. T urning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on.
17 E T urning Power On/Off n Date/time setting • If the time has yet to be set when the monitor is rst turned on, the date/time setting screen appears. Set the date and time. DA TE/TIME SETTING // OK···[ENTER] CANCEL···[RETURN] : : 01 01 13 / 12 AM 00 : / 20 1.
18 E Basic Operation 1 2 3 4 5 8 9 10 7 6 1. INPUT (Input mode selection) The men u is displayed. Press or to select the input mode, and press ENTER to enter .
19 E Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it lls the entire screen. A V input An image with a 4:3 aspect ratio is stretched to ll the entire screen.
20 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 20 to 29 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed.
21 E Menu item details The menu will differ depending on the input mode. n SCREEN Y ou can m ove the menu screen display position each time DISPLA Y is pressed. AUTO (D-SUB[RGB]/DVI-I (analog)) The CLOCK , PHASE, H-POS, and V -POS are automatically adjusted.
22 E n PICTURE Y ou can move the menu screen display position each time DISPLA Y is pressed. BRIGHT Adjusts the backlight brightness. (In PIP mode, the main side setting is reected in the image.) CONTRAST Adjusts the difference between the bright and dark portions of the image.
23 E Menu Items ADV ANCED AUTO (D-SUB[RGB]/DVI-I (analog)) The ANALO G GAIN and ANALOG OFFSET are automatically adjusted. Pressing ENTER perfor ms adjustment. ANALOG GAIN (D-SUB[RGB]/DVI-I (analog)) Adjusts the bright portions of the video input signal.
24 E Menu Items n AUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values.
25 E Menu Items COMMUNICA TION SETTING RS-232C/LAN SELECT Selects the method with which to control the monitor from the computer . BAUD RA TE Selects the communication speed used for RS-232C communication. LAN SETUP Congures the settings to control the monitor from the computer via LAN.
26 E n MONITOR MONITOR Select the installation direction of the monitor . LANDSCAPE ............Landscape orientation PORTRAIT ............... Portrait orientation OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V -POSITION Adjusts the vertical display position of menu screen.
27 E n MUL TI/PIP MUL TI ENLARGE (See page 29.) Sets whether or not to use the enlarge function. ADV ANCED (ENLARGE) ENLARGE H / ENLARGE V .......... Sets the number of screen splits (number of monitors) in the horizontal/vertical direction used for the enlargement.
28 E Menu Items n OTHERS SCREEN MOTION P A TTERN Residual images are reduced by moving the screen. OFF ................. SCREEN MOTION function is disabled. P A TTERN1 ...... The whole screen moves vertically and horizontally . P A TTERN2 ...... A black screen spreads from the bottom of the screen and then shrinks to the bottom of the screen.
29 E n Dual screen display Y ou can display two screens simultaneously . Set this function with PIP MODES of PIP/PbyP in the MUL TI/ PIP menu. PIP Main screen Sub screen A sub s cree n is displ ayed inside a main screen. PbyP Main screen Sub screen A main screen and a sub screen are display ed in a line.
30 E n SCHEDULE Y ou can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (See page 24.) - : – – – – – – – – – – – – – – – – – SCHEDULE No.
31 E Adjustments for PC screen display n Automatic adjustment When you use the D-SUB[RGB] or DVI-I (analog) to display a PC screen for the rst time, or when you change the setting of the PC, use the automatic screen adjustment. 1. Switch the input to D-SUB[RGB] or DVI-I (analog) and display the adjustment pattern.
32 E Y ou can return the settings to their factory-preset values and restrict operations. 1. Hold SIZE down until “F” appears in the upper left corner of the screen.
33 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. Y ou can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 34), you can make input mode selection/adjustment or can check the status of a specic monitor .
34 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
35 E Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3I D number: 4 IDST ........ . A monitor receiving this command sets its own ID number in the parameter eld.
36 E Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. Y ou can use Repeater control function without assigning ID numbers.
37 E RS-232C command table How to read the command table Command: Command eld (See page 33.) Direction: W When the “Parameter” is set in the parameter eld (see page 33), the command functions as described under “Control/Response Contents”.
38 E SCREEN menu Function Command Direction Parameter Reply Control/Response contents * AUTO ASNC W 1 When the input mode is D-SUB[RGB], DVI-I (analog). - CLOCK CLCK WR 0-1200 0-1200 When the input mode is D-SUB[RGB], DVI-I (analog). V aries depending on the signal.
39 E Function Command Direction Parameter Reply Control/Response contents * ADV ANCED AUTO AGIN W 1 When the input mode is D-SUB[RGB], DVI-I (analog). - ANALOG GAIN ANGA WR 0-127 0-127 When the input mode is D-SUB[RGB], DVI-I (analog). ○ ANALOG OFFSET ANOF WR 0-127 0-127 When the input mode is D-SUB[RGB], DVI-I (analog).
40 E SETUP menu Function Command Direction Parameter Reply Control/Response contents * DA TE/TIME SETTING DA TE WR AABBCCDDEE AABBCCDDEE AA: Y ear, BB: Month, CC: Day , DD: Hour, EE: Minute ○ DA TE .
41 E Controlling the Monitor with a PC (RS-232C) MONITOR menu Function Command Direction Parameter Reply Control/Response contents * MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT ○ OSD H-POSITIO.
42 E MUL TI/PIP menu Function Command Direction Parameter Reply Control/Response contents * ENLARGE ENLG WR 0-1 0-1 0: OFF , 1: ON - ENLARGE MODE EMAG WR 0-4 0-4 0: OFF , 1: 2 x 2, 2: 3 x 3, 3: 4 x 4,.
43 E Function Command Direction Parameter Reply Control/Response contents * PIP MODES MWIN WR 0-3 0-3 0: OFF , 1: PIP , 2: PbyP , 3: PbyP2 ○ PIP SIZE MPSZ WR 1-64 1-64 PIP POS THE LONGEST DIRECTION MHPS W 0-100 R 0-100 THE SHORTEST DIRECTION MVPS W 0-100 R 0-100 PIP POS LD+SD BA TCH MPOS W 0-100,0-100 Specify the position in MPOSxxxyyy format.
44 E Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 - ADJUSTME.
45 E Y our monitor can be connected to a LAN allowing you to control it from a PC on the LAN. Y ou can also congure the monitor to send e-mail notication when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).
46 E ■ T o set from a PC When the monitor is connected to a PC, LAN settings can be congured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Congu.
47 E 5. Click on “LAN SETUP” under NETWORK. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to “ON”. T o set the address manually , set this to “OFF”.
48 E ■ INFORMA TION Information about this monitor appears. ■ CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE ) on the remote control unit. (See page 18.) TIPS • In standby mode, Power ON is the operation available.
49 E ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to ON. T o set the address manually , set this to OFF .
50 E ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
51 E ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notication e-mail to. CONDITION Specify the conditions to send mails.
52 E Controlling the Monitor with a PC (LAN) ■ SNMP Y ou can congure settings related to SNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Set the name of the community required for the access.
53 E Controlling the Monitor with a PC (LAN) [Advanced operation] Command-based control Y ou can control the monitor using RS-232C commands (see page 36) via terminal software and other appropriate applications. In order to use this function, enable a connection to the monitor through Internet Explorer .
54 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 13.) • Is the main power switch off? (See page 16.
55 E The Power LED is ashing in red and green alternately . When “TEMPERA TURE” is displayed in the corner of the screen. • When the internal temperature of the monitor rises excessively , the brightness of the backlight decreases automatically in order to prevent high-temperature- related problems.
56 E Specications n Product Specications Model PN-R603 LCD component 60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max.
57 E Specications n Dimensional Drawings Note that the values shown are approximate values. 7-7/8 [200] Unit: inch [mm] 7/16 [1 1.2] 1-9/16 [39.4] 54-1/4 [1378] Opening width (52-3/4 [1340]) Openin.
58 E n Compatible signal timing (PC) * Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
59 E Specications n DVI-I input terminal pins (DVI-I 29 pin) No. Function No. Function 1 TMDS data 2- 16 Hot-plug detection 2 TMDS data 2+ 17 TMDS data 0- 3 TMDS data 2/4 shield 18 TMDS data 0+ 4 N.C. 19 TMDS data 0/5 shield 5 N.C. 20 N.C. 6 DDC clock 21 N.
60 E Specications n DVI-D output terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot-plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.
61 E • When installing, removing or moving the monitor , ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor . • This monitor is designed to be installed on a concrete wall or pillar .
PN-R603 Mu EN12M(2).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp PNR603 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp PNR603 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp PNR603 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp PNR603 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp PNR603, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp PNR603.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp PNR603. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp PNR603 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
