Il manuale d’uso Sharp PNL802BPKG2A Computer Monitor

Sintesi del contenuto nelle pagine seguenti del manuale d’uso

Pagina 1

PN-L802B LCD MONIT OR OPERA TION MANUAL.
Pagina 2

IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
Pagina 3

3 E IMPORT ANT INFORMA TION W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE.
Pagina 4

4 E IMPORT ANT INFORMA TION (Continued) A. Information on Disposal for Users (private households) 1. In the European Union Attention:Ifyouwanttodisposeofthisequipment,please.
Pagina 5

5 E ThankyouforyourpurchaseofaSHARPLCDproduct. T oensuresafetyandmanyyearsoftrouble-freeoperationofyour product, please read the Safety Precautions carefully before using this product.
Pagina 6

6 E SAFETY PRECAUTIONS (Continued)  19.  Batteries—Incorrectuseofbatteriesmaycausethebatteriestoburstorignite. A leakybatterymaycorrodetheequipment, dirty your hands or spoil your clothing.
Pagina 7

7 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology . However , there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.
Pagina 8

8 E MOUNTING PRECAUTIONS • Thisproductisforuseindoors. • A mountingbracketcompliantwithVESA specicationsis required. • Sincethemonitorisheavy ,consultyourdealerbefore installing,removingormovingthemonitor .
Pagina 9

9 E For information on the touch panel driver , see the T ouch Panel Driver Opera tion Manual. For information on the Pen Software, see the Pen Software Operation Manual. Supplied Components If any component should be missing, please contact your dealer .
Pagina 10

10 E n Front view 7 68 11 33 2 3 5 4 2 1. Sensor 2. T ouch pen ultrasonic sensor 3. Reective surface 4. Power button (Seepage16.) 5. T ray 6. Remote control sensor (Seepage15. ) 7. Input switch (Seepage21. ) 8. Power LED (Seepage16.
Pagina 11

11 E Part Names n Remote control unit 1 2 3 4 5 6 9 8 7 1. Signal transmitter 2. POWER button (Seepage16.) 3. MUTE button (Seepage21.) 4. VOL +/- buttons (Seepage21.) BRIGHT +/- buttons (Seepage21.) Cursor control ( / / / ) buttons 5.
Pagina 12

12 E Connecting Peripheral Equipment Caution • Besuretoturnoffthemainpowerswitchanddisconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipmenttobeconnected.
Pagina 13

13 E Connecting Peripheral Equipment Connection when the PN-ZB01 (optional) is attached ThePN-ZB01expansionboard(optional)allowstheuseof additional connection terminals. 7. PC/A V DVI-D input terminal • SetDVIofINPUTSELECT ontheOPTIONmenu according to the device to be connected.
Pagina 14

14 E Connecting the Power Cord Caution • Useonlythepowercordsuppliedwiththemonitor . 1.T urnof fthemainpowerswitch. 2.Plugthepowercord(supplied)intothe ACinputterminal. 3.Plugthepowercord(supplied)intothe ACpoweroutlet.
Pagina 15

15 E Preparing the Remote Control Unit Installing the batteries 1. Pressthecovergentlyandslideitinthedirectionofthe arrow .
Pagina 16

16 E Caution • T urnonthemonitorrstbeforeturningonthePCor playback device. T urning on the main power Main power switch Caution • Themainpowermustbeturnedon/offwiththemainpower switch.
Pagina 17

17 E T urning Power On/Off n Date/time setting • Ifthetimehasyettobesetwhenthemonitorisrstturned on, the date/time setting screen appears. Set the date and time. DA TE/TIME SETTING SET CANCE L // OK···[MENU] : : 01 01 12 / 12 AM 00 : / 20 1.
Pagina 18

18 E T ouch Pen Preparations/T ouch Action Inserting the battery 1. Rotatethebatterycapandremoveit,andthenpulloutthe cover . Battery cap 2. Insertthesuppliedbattery(LR-03(“AAA”size))inthe orientation shown, and attach the cover and battery cap.
Pagina 19

19 E Double-tap* 1 Sameactionasdouble-clickingamouse. Quicklytouchtwicewithyournger/pen. Whendouble-tappingwithyournger ,besuretoliftyour ngersufcientlyoffthescreenafterthersttap.
Pagina 20

20 E Press-and-tap Sameactionasright-clickingamouse. Withonengertouchingthescreen,taponce(singletap)with anothernger . Withonengertouching T aponce(singletap)withanothernger Rotation Use this action in a screen that is capable of image rotation.
Pagina 21

21 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter . * Y oucanselecttheinputterminalbypressingtheinput switch of the monitor .
Pagina 22

22 E Basic Operation n Switching the screen size Evenwhenthescreensizeischanged,thedisplaymayremainthesamedependingontheinputsignal. WIDE PCinput Displaysimagesoitllstheentirescreen.
Pagina 23

23 E Menu Items Displaying the menu screen Videoandaudioadjustmentandsettingsofvariousfunctions are enabled. This section describes how to use the menu items.
Pagina 24

24 E Menu item details The menu will differ depending on the input mode. n SCREEN Y ou can move the menu screen display position each time DISPLA Y is pressed. AUTO (PC D-SUB/PC RGB) TheCLOCK,PHASE,H-POS,andV -POSareautomatically adjusted.
Pagina 25

25 E USER AdjustseachitemwhentheWHITEBALANCEissetto USER. R-CONTRAST .... Adjustsbright-tonedredcomponent. G-CONTRAST .... Adjustsbright-tonedgreencomponent. B-CONTRAST .... Adjustsbright-tonedbluecomponent.
Pagina 26

26 E Menu Items n OPTION DA TE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Setthedatein“Month/Day/Y ear”order . Setthetimeona12-hourbasis.(Factorydefault) DA TE/TIME FORMA T Sets the date/time display format.
Pagina 27

27 E Menu Items AUDIO OUTPUT (RCA) Sets the volume of sound output from the audio output terminals. When set to V ARIABLE 2, sound will not be output from the built-in speaker or the external speaker terminal. V ARIABLE1 ........ Y ou can adjust the volu me using VOLUME.
Pagina 28

28 E Menu Items n Dual screen display Y oucandisplaythescreensofthePCinputsignaland A V input signal simultaneously . Setthisfunctionwith“PIPMODES”inthePIP/PbyP menu. PIP Main screen Sub screen A sub s cree n is displ ayed inside a main screen.
Pagina 29

29 E n SCHEDULE Y ou can set the time to switch the monitor on and off. Setth isfunct ionwith “SCHEDU LE”int heOPTIO Nmenu. (See page 26.) - : – – – – – – – – – – – – – – – – – SCHEDULE No.
Pagina 30

30 E n ADV ANCED items (A V input) (See page 24 for additional Menu item details.) FLESH TONE Adjustthehuecontrol. 3D-NR Reduce the noise of playback images on video. Settingahigherlevelreducesmorenoise.However ,itmay cause blurring on an image.
Pagina 31

31 E Y oucanreturnthesettingstotheirfactory-presetvaluesand restrict operations. 1. Hold SIZE down until “F” appears in the upper left corner of the screen.
Pagina 32

32 E Controlling the Monitor with a PC (RS-232C) Y oucancontrolthismonitorfromaPCviaRS-232C(COM port)onthePC.
Pagina 33

33 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
Pagina 34

34 E Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the followingconnectionandIDnumbersetup.
Pagina 35

35 E Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. Y ou can use Repeater controlfunctionwithoutassigningIDnumbers.
Pagina 36

36 E RS-232C command table How to read the command table Command: Commandeld(Seepage32.) Direction: W Whenthe“Parameter”issetintheparametereld(seepage32),thecommandfunctionsasdescribed under“Control/ResponseContents”.
Pagina 37

37 E SCREEN menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO ASNC W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ CLOCK CLCK WR 0-1200 0-1200 WhentheinputmodeisPCD-SUB,PCRGB.
Pagina 38

38 E PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ ANALOGGAIN ANGA WR 0-127 0-127 WhentheinputmodeisPCD-SUB,PCRGB.
Pagina 39

39 E AUDIO menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) TREBLE AUTR WR -5-5 -5-5 ○ ○ ○ BASS AUBS WR -5-5 -5-5 BALANCE AUBL WR -10-10 -10-10 RESET ARST .
Pagina 40

40 E Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DA TE/TIME SETTING DA TE WR AABBCCDDEE AABBCCDDEE AA: Y .
Pagina 41

41 E PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIPMODES MWIN WR 0-3 0-3 0:OFF ,1:PIP ,2:PbyP ,3:PbyP2 ○ ○ ○ PIPS.
Pagina 42

42 E Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREENSIZE(PC) WIDE WR 1-5 1-5 1:WIDE,2:NORMAL,3:DotbyDot,4:ZOOM1,5:�.
Pagina 43

43 E WhenthePN-ZB01(optional)isattached,yourmonitorcan beconnectedtoaLANallowingyoutocontrolitfromaPCon the LAN. Y oucanalsocongurethemonitortosende-mailnotication when it has a problem.
Pagina 44

44 E ■ T o set from a PC WhenthemonitorisconnectedtoaPC,LANsettingscanbe conguredviaPC. Set up process (1)ConnectyourmonitortoaPC (2.
Pagina 45

45 E 6. Clickon“LANSETUP”underNETWORK. 7. Specifythe“DHCPCLIENT”,“IP  ADDRESS”,etc. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Pagina 46

46 E ■ INFORMA TION Information about this monitor appears. ■ CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE )ontheremotecontrolunit.(Seepage21.) TIPS • Instandbymode,PowerONistheoperationavailable.
Pagina 47

47 E ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Pagina 48

48 E ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the InternetExplorerscreen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
Pagina 49

49 E ■ MAIL (RECIPIENT) Thisscreenallowsyoutospecifytherecipientsofthee-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specifythee-mailaddressestosenderrornoticatione-mail to.
Pagina 50

50 E Controlling the Monitor with a PC (LAN) ■ SNMP Y oucanconguresettingsrelatedtoSNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Setthenameofthecommunityrequiredfortheaccess.
Pagina 51

51 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Isthepowercorddisconnected?(Seepage14.
Pagina 52

52 E When “AUTO DIMMING” is displayed. • Whentheinternaltemperatureofthemonitorrises excessively , the brightness of the backlight automatically decreases in order to prevent a further temperature rise.
Pagina 53

53 E Specications n Product Specications Model PN-L802B LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max.
Pagina 54

54 E Specications n Dimensional Drawings Note that the values shown are approximate values. 3-1/ 4 [82] 2-5/8 [66] 74 [1880] 1-15/16 [49] 7-7/8 [200] 45-9/16 [1 157] 7-7/8 [200] 46-3/4 [1 187] 47-1.
Pagina 55

55 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsync Vsyn c D ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 1280 × 768 1280 × 800 1280 .
Pagina 56

56 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDSdata2- 13 N.C. 2 TMDSdata2+ 14 +5V 3 TMDSdata2/4shield 15 GND 4 N.C. 16 Hot-plugdetection 5 N.C. 17 TMDSdata0- 6 DDCclock 18 TMDSdata0+ 7 DDCdata 19 TMDSdata0/5shield 8 N.
Pagina 57

57 E • Wheninstalling,removingormovingthemonitor ,ensurethatthisiscarriedoutbyatleast6people. • Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor .
Pagina 58

PN-L802B Mu EN12A(1).

Leggere il manuale d’uso Sharp PNL802BPKG2A - evitare problemi

Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:

per sapere come usare correttamente il dispositivo
per sapere come mantenere ed eseguire controlli periodici del corretto funzionamento del prodotto Sharp PNL802BPKG2A
per sapere come procedere in caso di guasti Sharp PNL802BPKG2A

Se non hai ancora comprato il Sharp PNL802BPKG2A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp PNL802BPKG2A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp PNL802BPKG2A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp PNL802BPKG2A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.

In una situazione in cui hai già il Sharp PNL802BPKG2A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp PNL802BPKG2A.

Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp PNL802BPKG2A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp PNL802BPKG2A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.

Sharp PNL802BPKG2A manuale d’uso

Condividere URL

Manuali d’uso simili

Condividere URL

Manuali d’uso simili

Sintesi del contenuto nelle pagine seguenti del manuale d’uso

Pagina 1

Pagina 2

Pagina 3

Pagina 4

Pagina 5

Pagina 6

Pagina 7

Pagina 8

Pagina 9

Pagina 10

Pagina 11

Pagina 12

Pagina 13

Pagina 14

Pagina 15

Pagina 16

Pagina 17

Pagina 18

Pagina 19

Pagina 20

Pagina 21

Pagina 22

Pagina 23

Pagina 24

Pagina 25

Pagina 26

Pagina 27

Pagina 28

Pagina 29

Pagina 30

Pagina 31

Pagina 32

Pagina 33

Pagina 34

Pagina 35

Pagina 36

Pagina 37

Pagina 38

Pagina 39

Pagina 40

Pagina 41

Pagina 42

Pagina 43

Pagina 44

Pagina 45

Pagina 46

Pagina 47

Pagina 48

Pagina 49

Pagina 50

Pagina 51

Pagina 52

Pagina 53

Pagina 54

Pagina 55

Pagina 56

Pagina 57

Pagina 58

Leggere il manuale d’uso Sharp PNL802BPKG2A - evitare problemi

Altri manuali d’uso nella categoria Computer Monitor

321 Studios W2043T

321 Studios W2243T

321 Studios W2343T

3M 11-71315-225-01

3M 11-71315-227-01

3M 11-81375-227

3M 3M034-030-TNG and 3M034-031-TNG

3M 3M034-3-TNG

3M 725

3M ET 355