Manuale d’uso / di manutenzione del prodotto CD788 del fabbricante Sendai
Vai alla pagina of 24
CAR CD / MP3/WMA PLAYER RDS RECEIVER CD788 e 13 022706 ITEM CODE : 345827 CD788.
CONTROL AND FUNCTION KEYS 16 VOLUME UP/DOWN BUTTON 4 EJECT BUTTON POWER BUTTON DISPLA Y BUTTON RESET BUTTON 18 BAND BUTTON MP3 SEARCH BUTTON TUNING UP/DOWN TRACK UP / DOWN BUTTONS PRESET STA TIONS BUT.
1.HANDLING COMP ACT DISCS MOISTURE CONDENSAT ION NOTES ON CDs P. 2 P. 3 P. 4 P. 1 P. 5 P. 6 P. 7 1. 2. 3. 4. 5. NOTES ON DISCS There are paste residue. Ink is sticky (P .5). Stickers that are beginning to peel away , leaving a sticky residue (P .6). Labels are attached (P .
2. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.
E - 5 3. DETACHABLE CONTROL P ANEL (D.C.P .) Removing The Detachable Control Panel (D.C.P .). 1. Turn the power off 2. Press the D.C.P . release button 3. Remove the D.C.P . PANEL RELEASE BUTTON B A 2 Attaching the DCP CAUTION 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D.
E - 6 4. WIRING DIAGRAM FEMALE WITH MALE TERMINAL ISO CONNECTOR 4PIN+8PIN FUSE SOCKET ISO CONNECTOR FUSE 5 6 3 1 2 4 7 8 5 6 3 1 2 4 7 8 Figure 1 CONNECTOR A CONNECTOR B REAR LINE OUT L-CH R-CH RED WH.
2. MODE BUTTON (MODE) E - 7 Press this button to remove the control panel. 5. BASIC OPERATIONS 14. PANEL RELEASE BUTTON (REL) 1. POWER ON/OFF BUTTON ( ) Press POWER button or any other button on the front of the radio (except Open/Eject)to turn the unit on.
Fader Press the AUDIO SELECT button five times, then press the Volume down / up button to adjust the fader between the front and rear speakers from R12 (full rear) to F12 (full front). "C00” Represents a center fader level between the front and rear speakers.
Contrast The contrast level of the display is set at "CONTRAST 05" by default. Press the volume down/up button to adjust the contrast level from 00 to 10. Dimmer The dimmer feature of the display is set to "DIMMER High" by default.
Personal T ext Message Press the MENU button will see the “PTM” on the display ,this will allow the user to input his favor .greeting note on the display. The “INPUT MESSAGE” will be displayed by default. User is allowed to input max. 20 letters or symbols for the “PTM” to be displayed on the LCD.
IGNITION OFF CLOCK RECALL The user can recall to display the clock time by press DISPLAY button, even when ignition is off. E - 11 GREETING NOTE There are three different greeting note displayed on LCD base on different condition.
Manual Tuning Press the Up Tuning or Down T uning button for more than 3 seconds to move the radio frequency number up or down one step. Auto Seek Tuning Press the Up Tuning or Down T uning button for less than 3 seconds to move to next station automatically.
7. CD PLAYER OPERA TION INSERT AND EJECT CD Insert a CD label-side up with the unit turned on, and the disc will begin to play. Press the Eject button to stop CD play and eject the CD. The unit does not have to be turned on to eject the CD. PAUSE BUTTON (PA U) Press the pause button to suspend disc play.
MP3/WMA SECTION E - 14 RDS functions - AF Alternative Frequencies - CT Clock Time - EON Enchanced other Network - PI Program identifications - PS Program service name - PTY Program Type - REG Regional Change - TA Traffic Announcement - TP Traffic program By pressing AF button < 3 seconds to select AF ON/OFF .
MP3/WMA SECTION E - 15 User can store his favor PTY into the preset memory M1 to M6. After selected a PTY item, long press any one of the preset memory button can store the selected PTY .
MP3/WMA SECTION E - 16 TA Volume “18” will be displayed by default. The user now has 5 seconds to adjust by using volume up/down button from “0-40”. When TA function is activated, if a TA program is tuned in at the volume level set regardless of the volume of the other source at the time.
E - 17 9. MP3/WMA OPERATION MP3 and WMA (Windows Media Audio) music files are digital audio files that are compressed to allow more files on a single CD. This unit can play MP3/WMA directly from files contained on a CD-R/RW using the buttons on the receiver.
E - 18 Writing Files into a Medium When a medium containing MP3/WMA data is loaded, the unit checks all data. If the medium contains many folders or non-MP3/WMA files, MP3/WMA play will be delayed, it may take time for the unit to move to the next file, and searches may not be performed smoothly.
FILE/FOLDER PLAY There are three different play methods as following: Press M2 button more than 3 seconds during playing MP3/WMA disc for “intro play” all files of the current folder. Intro play should restart from the first song of the current folder , after all files in the current files have been intro-played.
MP3/WMA FILE OR FOLDER SEARCHING (volume down/up button) During MP3 or WMA files playback, press MP3 search button (Band Button) twice LCD will display “Navigate search”, Press “Audio Select” key or press volume down/up button to enter the “Navigate search”.
ID3 INFORMATION DISPLAY If any MP3/WMA file recording with ID3 Tag information. The ID3 information such like Album title, Track title, Artist Title will be displayed and automatic scrolling through the LCD while the file is playing. User also allows pressing the AS/PS button repeatedly to view the ID3 tag information manually.
E - 22 GENERAL AM/MW Power Supply Polarity Speaker impedance Power Output Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio DC 11 -14V Negative Ground 4 ohms 4 x 40W 87.5-108 Mhz 10.7 MHz Better than 15dB at S/N 30 dB 25 dB at 1KHz 50 dB 10.
ERROR 1 ERROR 2 ERROR 3 No File Disc Error Mechanism Error Servo Focus Error Servo T racking Error No file Format supports for Playback on the disc Maybe disc dirty / disc scratched /disc upside down. Press the reset button to correct the problem. If the error code does not disappear , consult your nearest service dealer .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sendai CD788 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sendai CD788 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sendai CD788 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sendai CD788 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sendai CD788, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sendai CD788.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sendai CD788. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sendai CD788 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
