Manuale d’uso / di manutenzione del prodotto MV DR8T del fabbricante AVE
Vai alla pagina of 40
V ersion 1.3 00P379100ASEA3 DR T16 / DR T8 Digita l V ideo Recorder User ’ s Manual 00P379100ASEA3.
User ’ s Manual Caution and Preventive T ip s • Switch the 1 15/230V selector to your local voltage st andard • Handle with care, do not drop the unit • Mount the unit in an equipment rack or place it on a solid, stable surface. • Indoor use only .
User ’ s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items.
User ’ s Manual T able of Content 1. Overview ....................................................................................................................... 6 1.1 Product Key Features ........................................................
User ’ s Manual 4.5 Deleting Recorded Video ................................................................................... 29 4.6 Dome Control .....................................................................................................
User ’ s Manual 1. Overview The DRT16 / DRT8 DVR is an integrated digital vid eo recorder that combines the features of a time-lap se audio / video recorder , a multiplexer , and a video server to create a single security CCTV solution.
User ’ s Manual • Programmable call-monitor switching sequence • Pre-Alarm recording • IR Remote controller (Optional) • Multiple language on-screen menus • Network software support s static IP and DHCP • Support RS-485 remote control keyboard (Optional) 1.
User ’ s Manual 2. System Setup The notices and introduction on system installation will be described particularly in this chapter . Please follow the description to operate the unit.
User ’ s Manual Connecting Required Devices Before power up the unit, you should connect cameras and a main monitor to the unit for basic operation. If needed, c onnect a call monitor for displaying full screen video of all instal led cameras in sequence.
User ’ s Manual V ideo Input A group of BNC connectors are availa ble for video input streams from installed cameras. The number of c onnectors is equal to the number of channels; the DRT16 / DRT8 DVR has 8/ 16 BNC connectors on the rear panel, respectively .
User ’ s Manual LAN Connector (RJ-45) The DRT16 / DRT8 DVR is capable of networki ng. The LAN port opens the door of DRT16 / DRT8 DVR to Ethernet. USB Connector (x2) There are two USB 2.0 ports on the rear panel for users to connect external USB devices to the unit, such as ThumbDrive or CD-ROM.
User ’ s Manual 3.1 Front Panel Introduction The front panel controls enable user to control the unit and preset the programmable functions. 3.1.1 LED Definition The DRT16 / DRT8 DVR LEDs on the front panel are described as follows. Power LED (Green) The LED lit during the period when the correct power is connected.
User ’ s Manual 3.1.2 Function Keys The DRT16 / DRT8 DVR functional keys on the front panel for normal operation are described as follows. NOTE: The left HDD should be set to “Master” and the right one should be set to “Slave”.
User ’ s Manual FREEZE • Press FREEZE while viewing li ve image, the liv e video will be frozen. The date / time information shown on the monitor will continue updating. Press FREEZE again to return to live mode. • Press FREEZE while playing th e recorded video, the playback video will be paused.
User ’ s Manual CALL/ COPY • In Live mode, press to enter call monitor control mode; press ESC to exit. • In Playback mode, press CALL to select the st art and end point of the video you want to export. More detailed information refer to Section 4.
User ’ s Manual <Power Off> Select this item to shut down the unit. Do not remove the power during shut down until the message “Y ou can safely turn off DVR now!” displays.
User ’ s Manual Move the cursor up / down over the OS D items using the Direction keys and press ENTER to enter the selected sub-menu. 3.4 System Date / T ime Setting User can set the current date, time and other OSD p arameters in Date/T ime menu. The administrator ’s privileges are required for entering the submenu.
User ’ s Manual Date Display Mode This function allows user to set the OS D display type of t he date / time. There are three options to sele ct from: <Y/M/D>, <M/D /Y> or <D/M/Y>. “Y” represents “Y ear”, “M” represent s “M onth” and “D” represents “Day”.
User ’ s Manual 3.5 Record Schedule / Quality Setting The Record Setup menu allows user to set recording quality , recording schedules, and other recording paramete rs. T o setup the recording quality and schedules, you have to enter t he OSD Setup Menu with correct Administrator's password.
User ’ s Manual 3.5.2 Schedule Setup The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select <Schedule Se tup> from the Record Setup menu and press ENTER; the followi ng menu is displayed. Schedule Setup 1.
User ’ s Manual 4. Basic Operation The DRT16 / DRT8 DVR allows user to access some general operations through the front panel easily . The follo wing sections introduce the general operations of the unit. 4.1 V iewing Live / Playback Video The general functions in live and pl ayback mode are described in the following sections.
User ’ s Manual • Press a CHANNEL key to view the corresponding camera in full screen. • Press ZOOM to enter a 2 × full screen zoom mode of the selected camera. • If you need to view specific area of the 2 × zoomed screen, use Direction keys to pan / tilt the zoomed ar ea around the original image.
User ’ s Manual 4 × , 8 × , 16 × , or 32 × . RIGHT (Forward Playback) The key is used to play the recorded video fast forward. Press the key repeatedly to increase the speed of forward playback by 1 × , 2 × , 4 × , 8 × , 16 × , or 32 × . FREEZE Press FREEZE to pause the playback video.
User ’ s Manual The eight windows on the top side of the screen are used to view the Live video from channel 1 to channel 8 res pectively , and the other windows allow user to view Playback image from channel 1 to channel 8.
User ’ s Manual • Alternatively , press SEQ repeatedly to display the sequence of cameras previously programmed in Ca ll Monitor Schedule menu. • Press ESC to return the front p a nel to Main monitor control mode.
User ’ s Manual NOTE: The date/time information will be shown on the screen with a DST icon if the Dayli ght Saving T ime function is enabled. “S” indicates summer time and “W ” indicates wintertime. 4.3.2 Searching by Event “Event List” allows you to search w anted video by event.
User ’ s Manual 4.4 V ideo Export The unit allows you to export want ed video to the built-in CD-RW/DVD+R W or an external device, such as a USB ThumbDrive ® , and save the video to *.
User ’ s Manual The whole process is described step by step in the following sections. 4.4.2 T o Export Normal V id eo T o Export normal video to exte rnal device, follow these step: • Press SEA RCH and play wanted normal video by entering date and time.
User ’ s Manual 4.4.3 T o Export Event V ideo T o export event video, follow thes e step s: • Press SEARCH and play wanted event video. T o play event video, refer to Section 4.3 Searchi ng Recorded V ideo. • After entering the playback mode, press CALL.
User ’ s Manual Purge All Event Dat a Select the item to delete all event video from database. Purge Event Before The item is used to delete event video t hat recorded before a specific date. The default of this item is <2000/01/01>. 4.6 Dome Control DRT16 / DRT8 DVR allows user to c ontrol a dome camera by the front panel.
User ’ s Manual 4.6.2 Dome Protocol Setup The Dome Protocol item lis ts the available dome pr otocols for communicating with dome cameras connected to the DRT16 / DRT8 DVR . From the Main menu, select <Camera Se tup> and press ENTER. T he following menu is displayed.
User ’ s Manual The ID number must match the ID address set by the dom e. The Unit ID is in the range of 1 to 255. The default ID is 224. Note that no two devices on the same bus should be given the same ID address, or a conflict may occur . The default DRT16 / DRT8 DVR RS-485 settings are 9600 Baud, 8 Data Bit s, 1 S top Bit and No Par ity .
User ’ s Manual Zoom In Use to zoom the dome camera in. This function is for user to choose the viewing area, more or less of it. ESC Use to leave dome control mode and return to live and full screen viewing mode. Auto / Enter • In OSD Menu mode, the key is used to make selection.
User ’ s Manual 4.6.5 Setting Preset Point s The DRT16 / DRT8 DVR allows user to set preset positions; the amount of preset points depends on the dome manufacturer . Follow the steps to set preset point s. • Press a Channel key to view the corresponding camera in full screen.
User ’ s Manual 4.6.6 Calling Preset Point s Follow the steps to call preset point s. • Press a Channel key to view the corresponding camera in full screen. • Then press DOME to ent er dome control mode. • Press 2 to view the dome control Hin t Screen; press 2 again to toggle the Hint Screen.
User ’ s Manual Appendix A: Technical Specifications All specifications are subj ect to change without notice. Specifications 8ch T riplex MPEG-4 DVR 16ch T riplex MPEG-4 DVR V ideo Operation System.
User ’ s Manual Playback Playback Play , S top, Pause, Rewind, Forward, Search Playback Speed Adjustment Y es (1x, 2x, …32x) Retrieve Date/T ime, Event S torage Build-in Storage X2 A T A 133/ UDMA 133 IDE, HDD/CD-RW Built-in HDD Up to 2 built-in HDDs Export X3 USB2.
User ’ s Manual Appendix B: Record Duration The record duration relates to recording ra te, image quality and HDD capacity . Refer to the following table. NOTE: Record duration times are based on actual tests and represent average file sizes. Performance may vary depend ing on specific installations and use.
User ’ s Manual Number of Days of Recording @60PP S ( without Audio) Recording Rate Recording Picture Quality Mode Low Fair Mid High Best Total Images Per Second NTSC Total Images Per Second PAL NTSC (5 KB) PAL (5 KB) NTSC (8 KB) PAL (8 KB) NTSC (11 KB) PAL (11 KB) NTSC (14 KB) PAL (14 KB) NTSC (17 KB) PAL (17 KB) 160 GB Internal Storage 60 50 5.
User ’ s Manual 600 GB Internal Storage 60 50 51.4 61.7 22.0 26.5 14.0 16.8 10.3 12.3 8.1 9.7 30 25 102.9 123.5 44.1 52.9 28.1 33.7 20.6 24.7 16.2 19.5 15 12.5 205.8 246.9 88.2 105.8 56.1 67.3 41.2 49.4 32.5 39.0 7.5 6.25 41 1.5 493.8 176.4 21 1.6 1 12.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AVE MV DR8T è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AVE MV DR8T - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AVE MV DR8T imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AVE MV DR8T ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AVE MV DR8T, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AVE MV DR8T.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AVE MV DR8T. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AVE MV DR8T insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
