Manuale d’uso / di manutenzione del prodotto PDP-32H1AN del fabbricante Sanyo
Vai alla pagina of 44
Owner's Man ual PDP-32H1ENV Multimedia Plasma Monitor MODEL PDP-32H1AN PDP-32H1EN.
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this Plasma Monitor from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus .
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 16 COMPUTER MODE 28 VIDEO MODE 32 SETTING 34 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PLASMA MONITOR 7 SETTING-UP PLASMA MONITOR 9.
6 FEA TURES AND DESIGN This Plasma Monitor is designed with the most advanced technology. The Plasma Monitor utilizes built-in multimedia features, a palette of 16.
7 PREP ARA TION NAME OF EA CH P ART OF PLASMA MONIT OR FRONT INFRARED REMOTE RECEIVERS FRONT CONTROLS AND INDICATORS Used to select MENU operation. (P18) MENU BUTTON INPUT BUTTON MAIN ON/OFF SWITCH VOLUME BUTTONS Used to select input source. (P22) Used to adjust volume.
8 PREP ARA TION NAME OF EA CH P ART OF PLASMA MONIT OR BACK COOLING FANS This Plasma Monitor detects internal temperature and automatically controls operating power of Cooling Fans.
9 SETTING-UP PLASMA MONIT OR PREP ARA TION This Plasma Monitor uses nominal input voltages of 100- 120 V or 200-240 V AC. The Plasma Monitor automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor.
10 PREP ARA TION INST ALLA TION OF OPTIONAL SPEAKERS AND ST AND Place the Speakers to each side of the Plasma Monitor and attach Right and Left brackets with the specified screws.
11 CONNECTING PLASMA MONIT OR TERMINALS OF PLASMA MONIT OR This Plasma Monitor has INPUT TERMINALS and OUTPUT TERMINALS on its side and back, for connecting computers and video equipment.
12 CONNECTING PLASMA MONIT OR Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - A UDIO - L R - A UDIO - L R - A UDIO - L R - A UDIO - L(MONO) VIDEO VIDEO VIDEO A UDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONIT OR OUT Connect analog RGB signal outputs or component video outputs to these jacks.
13 Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONITOR OUT C.
14 CONNECTING PLASMA MONIT OR CONNECTING T O COMPONENT VIDEO EQUIPMENT Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO.
15 CONNECTING PLASMA MONIT OR Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1.
16 MUTE WIDE INPUT ON-OFF V OLUME PC/RGB F COMPONENT OFF TIMER PICTURE ST A TUS MO VE UP MO VE DO WN VIDEO OK OFF ON PO WER MENU BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL Used to select COMPONENT VIDEO input. (P22) Used to execute the selected menu on On-Screen Menu.
17 BEFORE OPERA TION OPEN OPEN 123 Slide the lid upward. Press the lid downward and slide it. Remove the battery compartment lid. Slide 2 batteries into the compartment.
18 BUTT ONS OF ON-SCREEN MENU OPERA TION FLO W OF ON-SCREEN MENU OPERA TION You can control and adjust this Plasma Monitor through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. Used to execute the selected menu.
19 BEFORE OPERA TION Contrast Contrast : Select OK : OK : Select OK : OK MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Brightness Brightness Color Color Tint Tint Sharpness Sharpness Sou.
20 B ASIC OPERA TION Connect the Plasma Monitor's AC Power Cord into an AC outlet . 2 TURNING ON / OFF PLASMA MONIT OR 1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on Plasma Monitor. (Refer to "CONNECTING PLASMA MONITOR" on Pages 13~15 for connecting that equipment.
21 OFF TIMER F ST A TUS MO VE DOWN OK OFF ON PO WER MENU PO WER ON button WHEN USE MUL TIPLE MONIT ORS When you use multiple Plasma Monitors, you can use POWER ON button and POWER OFF button on Remote Control Unit instead of the POWER ON-OFF button.
22 B ASIC OPERA TION SELECTING INPUT SOURCE INPUT button MENU OK INPUT VOLUME MUTE WIDE INPUT ON-OFF V OLUME PC/RGB COMPONENT OFF TIMER PICTURE MO VE UP VIDEO VIDEO button VIDEO INPUT Select either "AV 1 (VIDEO 1)" or "AV 2 (VIDEO 2)" by pressing VIDEO button on Remote Control Unit.
23 B ASIC OPERA TION PICTURE IMA GE LEVEL SELECT MUTE WIDE V OLUME PC/RGB OFF TIMER PICTURE ST A TUS MO VE UP MO VE DOWN OK MENU IN VIDEO/COMPONENT MODE Dynamic Natural PICTURE button Select image level among Dynamic, Natural, Cinema and Memory by pressing PICTURE button on the Remote Control Unit.
24 B ASIC OPERA TION IMA GE LEVEL ADJUSTMENT : Select : Adjust : Select : Adjust MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Contrast Contrast 63 63 Sound Sound : Select OK : OK : Sele.
25 B ASIC OPERA TION MUTE WIDE ON-OFF V OLUME PC/RGB COMPONENT OFF TIMER PICTURE MO VE UP VIDEO WIDE button Natural wide Zoom Zoom(Caption-IN) Full WIDE SCREEN OPERA TIONS Provides image to fit width of screen by expanding image width uniformly.
26 B ASIC OPERA TION ADJUSTING WIDE IMA GE : Select : Adjust : Select : Adjust MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Screen Adjust Screen Adjust Vertical Vertical 5 5 Horizontal Horizontal 0 0 Press MENU button and ON-SCREEN MENU will appear.
27 SOUND ADJUSTMENT MUTE V OLUME B ASIC OPERA TION Press VOLUME (+/ – ) button(s) on Remote Control Unit or Front Control to adjust volume. Volume dialog box appears on the screen for a few seconds. (+) button to increase volume, and ( – ) button decreasing.
28 COMPUTER MODE SELECTING INPUT SOURCE SELECTING COMPUTER SYSTEM This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 31).
29 PC ADJUSTMENT PC MODE ADJUSTMENT "PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position", "Power save" and "Information" to conform to your computer.
30 COMPUTER MODE Power save Enable or disable Power save function. Enable Power save by choosing "Yes" with buttons. NOTE : ● The Power save function automatically reduces the Plasma Monitor's power consumption if the computer is not operated for a certain period of time.
31 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this Plasma Monitor can accept the signal from all computers with the V, H-Frequency mentioned below and less than 100 MHz of Dot Clock. NOTE : The image data from connected computer is modified to fit the Plasma Monitor's screen size.
32 VIDEO MODE SELECTING INPUT SOURCE VIDEO INPUT Select either "AV 1 (VIDEO 1)" or "AV 2 (VIDEO 2)" by pressing VIDEO button on Remote Control Unit. AV 1 AV 2 COMPONENT INPUT Select "COMPONENT" by pressing COMPONENT button on Remote Control Unit.
33 VIDEO MODE SELECTING VIDEO SYSTEM If Plasma Monitor cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.
34 WHITE P A TTERN The screen saver "White pattern" displays white pattern. 1 2 In the "Screen saver" menu ("White pattern-On"), press button to select "Interval (time)", and press button to select desired interval time.
35 SETTING SETTING MENU Color system Press MENU button and ON-SCREEN MENU will appear. 1 Press button to select "Setup menu" and then press OK button. "Setup menu" will appear. 2 Press button to select the item that you want to setup, and setup the selected item by pressing button.
36 SETTING Color temperature This function is used for selecting color temperature. Select "Normal", "Cool" or "Warm" with buttons which you wish to select.
37 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected Plasma Monitor to your equipment as described in the section "CONNECTING PLASMA MONITOR" on pages 13 ~ 15.
38 APPENDIX There are tiny black points and/or bright points on the PDP. ● There may be some tiny black points and/or bright points on PDP (Plasma Display Panel). These points are normal. Pr oblem: T ry these Solution W ARNING : High v oltages are used to operate this Plasma Monitor .
39 APPENDIX This function activates due to the temperature inside Plasma Monitor. When the temperature inside Plasma Monitor exceeds the normal, after displaying a message, Plasma Monitor will be turned off automatically.
40 APPENDIX TECHNICAL SPECIFICA TIONS Screen Diagonal 32V Product name Multimedia Plasma Monitor Panel type Plasma Display Panel (16 x 9) Display area 716 mm (W) x 399 mm (H) Resolution / Color 852 x 1024 pixels / 16,770,000 colors Viewing Angle 160 ˚ (Vertical / Horizontal) Color System PAL / SECAM / NTSC / NTSC4.
41 APPENDIX This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 829 (32.6) 829 (32.6) 517 (20.
42 APPENDIX RS232C TERMINAL Terminal : HDB9-PIN Connect the serial port of computer to this terminal with Serial Cross Cable (not supplied). 3 5 4 2 1 7 9 8 6 No Connect Ground R x D DTR (5V) T x D 1 .
43 APPENDIX CONFIGURA TIONS OF PC TERMINALS PC IN (D-SUB) TERMINAL Terminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required.
Printed in Japan Part No. 610 301 2599 (1AA6P1P3504-- J3SF) SANY O Electric Co., Ltd.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sanyo PDP-32H1AN è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sanyo PDP-32H1AN - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sanyo PDP-32H1AN imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sanyo PDP-32H1AN ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sanyo PDP-32H1AN, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sanyo PDP-32H1AN.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sanyo PDP-32H1AN. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sanyo PDP-32H1AN insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
