Manuale d’uso / di manutenzione del prodotto SCC-ZM395N del fabbricante Samsung
Vai alla pagina of 34
Version 1.1 - 1 - www.samsungsecurity.com Color Camera Module SPECIFICATIONS MODEL SCC-ZM395 DATE Nov. 01. 2009 CUSTOMER APPROVED SUPPLIER CUSTOMER SAMSUNG ELECTRONICS Co .
Version 1.1 - 2 - Table of Contents - Revision History 1. Features --------------------------------------------- 4 2. Precautions ---------------------------------------- 5 3. Specifications Camera Module Spec. -------------------------------- 6 Spectral Response Spec.
Version 1.1 - 3 - - Revision History Date Version Description '09. 09. 13 '09. 10. 01 '09. 11. 01 0.1 1.0 1.1 Establishment ( for R&D sample) Mass Product ion Protocol changed and f.
Version 1.1 - 4 - 1. Features ■ 1/4" 410 K/470K Sony Ex-View-HAD Double Scan CCD P o w e rZ o o mO p t i c a l 39x (3.4~132.6 mm), Digital 12 x(0.
Version 1.1 - 5 - 2. Precautions ■ Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sen sor.
Version 1.1 - 6 - 3. Specifications 3-1. CAMERA Module Spec. Items Sub-items SCC-ZM395N SCC-ZM395P CCD Device SONY 1/4" ExView-HAD PS CCD ( ICX-448) SONY 1/4" ExView-HAD PS CCD ( ICX-449) Total 811 x 508 795 x 596 Effective 768 x 494 752 x 582 Sync.
Version 1.1 - 7 - 3-2. Spectral Response Spec. CCD ( ICX448AK/449AK).
Version 1.1 - 8 - 3-3. Hardware Spec. Rear View ① CN207 : I/O Connector-1 Pin NO Pin Name Description Normal Active I/O 1 RxD Read Data CMOS 5V ( Low : Max 0.
Version 1.1 - 9 - 3-4. Interface Circuit ① Video Amp Block ② Communication ( TXD/RXD) Block : TTL Level ③ Power I nput Block ④ Lpulse (External sync) Block DSP EXT_SYN 3.
Version 1.1 - 10 - 3-5. Reliability Zoom Lens ① Zoom Operation : more than 500,000 times Tele side Wide side 1sec 1 moving 5 moving 1 Cycle 5sec holding 2000step ↑ +1000step ↑ -1000step ↑ 960p.
Version 1.1 - 11 - 3-6. Dimension Front Left Side Rear Right Side Top Side Bottom Side Diagonal H : 20.9 mm Horizontal H : 18.9576mm Vertical H : 18.4620mm Lens Effective Angle.
Version 1.1 - 12 - 3-7. Packing Specifications (1 Carton =1 0 ea) MODEL NAME Zoom Module CARTON BOX LABEL CUSHION P ANEL (2 x 5) BAG CAP Test Report.
Version 1.1 - 13 - 4. Function 4-1. OSD MENU Stru cture MAIN MENU Description CAMERA SET Camera related functions an d data. INTELLIGE NCE Motion de tection, and more. PRIVACY ZONE Privacy related settings PRESET SET Preset position and Preset ID OTHER SET Configure for Factory Defaults, and more.
Version 1.1 - 14 - 4-2. Function ( OSD) □ USING ICONS IN THE MENU ◆ If these icons appe ar in the left and rig ht corner of a menu item, you can use the joystick to move to the previous or ne xt menu. ◆ ( EXIT) Exit the menu sett ing. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel.
Version 1.1 - 15 - 4-2-1. CAMERA SETUP You can configure the ge neral setting s of the module. Select < MAIN MENU> → < CAMERA SET>. The Camera Setup menu appe ars. Change th e settings as necessary , or select an ite m to check. ● CAMERA ID The CAMERA ID menu is used for you to assign a unique name to a camera.
Version 1.1 - 16 - - WDR : If you set < BACKLIGHT> to < WDR>, you will see a menu where you can set th e WDR options. specify the shutter speed in WDR LEVEL, and the compositio n level in < WEIGHT>. Select OUTDOOR, or INDOOR in < WHITE BAL>.
Version 1.1 - 17 - ● DNR ( Digital Noise Reduction) Reduces the n oise on the scre en. This is espe cially useful f or a severely distor ted screen. You can set the level if you set DNR to USER. This module use the moti on adaptive DNR algorith m. This is mixed 2D & 3D method data depends on moti on.
Version 1.1 - 18 - - BURST : If set to < O F F > ,t h eb u r s ts i g n a lw i l ln o tb e output in NIGHT mode. - DAY → NIGHT BRIGHTNESS : Specif y the brig htness level switching from COLOR to BW filter. Adjus ting from HIGH t oL O Ww i l lc a u s et os w i t c ht h ef i l t e ri n a darker screen.
Version 1.1 - 19 - According to t he specified recor ding mode, select a< WHITE BAL> mode w ith necessary options. - ATW1,2 : The camera can automa tically adjust the c olor temperature in real time, according to the ambient conditions.
Version 1.1 - 20 - ● DETAIL Controls the ho rizontal or v ertical distinc tion. ● V-SYNC Select the vertical sync mode for INT or LINE. I fy o us e l e c tI N T ,t h ec a m e r aw i l lu s e the internal synchronization. If selecting LINE, th e camera will use the externa l power source frequen cy for the synchronizatio n.
Version 1.1 - 21 - ● MASK AREA S e l e c tt h en u m b e ro ft h ea r e at ob em a s k e dt h a tw i l lb e excluded from moti on detection. Select the mask number and s et the mask size and its coverage. ● DISPLAY : ON, OFF With the DISPLAY option set to ON, a motion function will be displayed on the screen, if detected.
Version 1.1 - 22 - ※ Setting one or more pri vacy zone and enablin g privacy function will disable the PIP functio n. For better p rivacy prot ection, make your privacy zo ne bigger than the r equired, bigger by about 30%. Video portion of mosaic pattern or colored by the privacy zone setu p is not recoverable.
Version 1.1 - 23 - 4-2-7. SYSTEM INFORMATION You can view the system informatio n including th e protocol, address, baud rate, serial number, camera version, and EEPROM version. 4-2-8. LANGUAGE SET UP The camera supports 5 differen t languages. Select a preferr ed language.
Version 1.1 - 24 - 5. Communication 1) Connection ◆ Data Communication : Start-Stop Synchronized serial interface ◆ Data length :8 bit data ◆ Stop bit :1 bit ◆ Parity : None ◆ Baudrate : 4800, 9600, 19200, 38 400 bps ※ defaul t value :9 6 0 0 bps 2) Communication Protoco l ◆ All communication data consist of nine bytes.
Version 1.1 - 25 - 9 Byte Fixed Ack. Return Code of Camera ACK is applicable on ly in case that Byte4 of the command is 03H. Byte5, Byte6 and Byte7 of the A ck. data means as follows. ① * Byte5 of the A ck. data indicates whether the camera receive d command successfully.
Version 1.1 - 26 - ◆ Camera Control Command Command Byte4 Byte5 Byte6 Byte7 Byte8 Items Ack COMMUNI CA TION PROTOC OL 02H 19H 03H 00H **H 00 H: SAMSUNG 01 H: VICON 02 H: PANASONIC 03 H: PHILIPS 04 H.
Version 1.1 - 27 - BLC ON USER AREA Horizontal Start Point 02H 02H 07H * Hi * Low 0 x00H ~0 x277H O BLC ON USER AREA Horizontal End Point 02H 02H 08H * Hi * Low 0 x79H ~0 x2B7H O BLC ON USER AREA Vert.
Version 1.1 - 28 - FLICKER- LESS FLICKERLESS 02H 0 CH 00H 00H **H 00 H:OFF , 01 H:ON O * This function is disabled when SHUTTER is F IX or SENS-UP is FIX or AGC is F IX. DIS DIS 02H 15H 00H 00 H **H 00 H:OFF, 01 H:O N O * When zoom ratio is more than 45x including DZOOM, DIS function becomes automatically OFF .
Version 1.1 - 29 - * When BACKLIGHT is BLC, the MASK AREA is disable * The Mask area only can be used in AUTO mode * The area maximum length is 239 ( 0 xEF) ; maximum width is 188 (0 xB C) If you set .
Version 1.1 - 30 - DETAIL DETAIL 02H 0 FH 00H 00H **H 00 H~03H: 0~3 O V-SYNC V-SYNC 02H 10H 00H 00H **H 00 H: INT, 01 H: LI NE LOCK O V-SYNC PHASE 02H 10H 01H ** Hi ** Low NTSC 000 H~20CH: -262~+262 PAL 000 H~270H: -312~+312 O * When power is DC, LINE LOCK is disabled automatically.
Version 1.1 - 31 - PRIVACY M ASK AREA SIZE 02H 17H 03H *1H *2H *1 MASK AREA NO 00H ~ 0 BH : Mask NO.1~12 *2: SIZE adjust 00 H: height increase 01 H: height decrease 02 H: width increase 03 H: width decrease O PRIVACY M ASK AREA LOCATION 02H 17H 04H *1H *2H *1 MASK AREA NO 00H ~ 0 BH : MASK NO.
Version 1.1 - 32 - PRESET ID MENU DISPLAY 02H 2 0H *1H *2H *3H *1H 00 H~FFH: PRESET No.0~255 *2H ( PR E SET ID Sequence) 01 H~ 0C H: 0~1 2 *3H ( String) O * String Table 00H A 05H F 0 AH K0 FH P 14H U.
Version 1.1 - 33 - ◆ Camera Inquiry Command Command Byte4 Byte5 Byte6 Byte7 Byte8 Items ZOOM POSITION 50H FFH FFH FFH FFH A0 00 00 70 ◆◆ ◆◆ ◇◇ ◇◇ " ◇◇ ◇◇ " Zoom Pos.
Version 1.1 - 34 - ◆ Pan/Tilt angle dec ide the privacy area display ( NO Ack. Signal ) Command Byte4 Byte5 Byte6 Byte7 Byte8 Items PAN/TILT ANGLE 02H 25H **H **H **H R eceived the current pan/tilt value, the privacy zone display area will be changed automatically.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung SCC-ZM395N è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung SCC-ZM395N - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung SCC-ZM395N imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung SCC-ZM395N ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung SCC-ZM395N, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung SCC-ZM395N.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung SCC-ZM395N. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung SCC-ZM395N insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
