Manuale d’uso / di manutenzione del prodotto HT-BP10 del fabbricante Samsung
Vai alla pagina of 33
DIGIT AL HOME CINEMA SYSTEM HT -BP10 Instruction Manual AH68-01719B THIS APPLIANCE IS MANUF ACTURED BY : V I D E O COMPACT DIGITAL AUDIO COMPACT DIGITAL VIDEO.
GB 12 Safety W arnings Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally , on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
4 3 Multi-Disc Playback & FM T uner The HT -BP10 combines the convenience of multi-disc playback capability , including DVD, VCD, CD, MP3-CD, DivX, CD-R/RW , and DVD-R/RW , with a sophisticated FM tuner , all in a single player .
GB CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R disc. Do not use CD-R disk over 700MB/80 minute as much as possible since it may not be played back.
GB —Rear Panel— V ideo Cable Remote Control FM Antenna User's Manual 8 —Front Panel— 7 Power ( ) button Standby indicator Disc T ray V olume buttons FM Antenna Connector 5.1 Channel Speaker Output T erminals V ideo Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector .
GB 10 Insert Remote Batteries The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
GB SR SL C L SW R Rear Speaker (L) Front Speaker (L) Rear Speaker (R) Front Speaker (R) Subwoofer Center Speaker Press and hold the terminal tab. Insert the speaker cord. Release the finger . 1 2 3 12 Rear Speakers • Place these speakers behind your listening position.
GB 13 METHOD 2 Scart ............... Better Quality If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on the back panel of the system to the SCART IN jack on your television. METHOD 1 Composite Video .
GB 16 15 CONNECTIONS Press AUX on the remote control to select AUX input. • Y ou can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ AUX ➝ FM ➝ DAB . Connect Audio In on the Home Theater to Audio Out on the external analog component.
GB 18 17 OPERA TION 2 Load a disc. • Depending on the content of the disc, the initial screen may appear different. 1 Press OPEN/ CLOSE button to open the disc tray . 3 Press OPEN/ CLOSE button to close the disc tray . • Place a disc gently into the tray with the disc’s label facing up.
GB 20 19 OPERA TION DivX Playback Fast playback Skip Forward/Back During playback, press the button. • Goes to the next file whenever you press button, if there are over 2 files in the disk. • Goes to the previous file whenever you press button, if there are over 2 files in the disk.
GB 22 21 OPERA TION Images captured with a digital camera or camcorder , or JPEG files on a PC can be stored on a CD and then played back with this DVD player . JPEG File Playback JPEG Press the OPEN/CLOSE button to open the disc tray , and then load the JPEG disc.
GB 24 23 OPERA TION Fast Playback DVD VCD MP3 CD Press and hold . • Each time the button is held down during playback, the playback speed changes as follows: Press SLOW button.
GB 26 • The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor button to move to REPEA T PLA YBACK ( ) display . • For a VCD or CD, press INFO button once. 1 Press INFO button twice. A - A -? REPEA T : A— A - B REPEA T : A—B • The specified segment will be played repeatedly .
GB 28 DVD VCD DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM button. • Each time the button is pressed, the zoom level changes as follows: 3 Press ENTER button. Press EZ VIEW button. • Each time the button is pressed, the zoom function will switch between On and Off.
GB 30 • The selected file will be played. • An MP3 or JPEG disc cannot be moved in the disc information screen. • When playing an MP3 or JPEG disc, you cannot use , to move to a folder .
GB 32 OSD (On-Screen Display) language is set to English by default. Setting the Language 31 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. 4 • Once the setup is complete, if the language was set to English, OSD will be displayed in English.
33 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. • Once the setup is complete, you will be taken to the previous screen. Press Cursor button to move to ‘TV DISPLA Y’ and then press ENTER button.
GB 36 • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
GB 38 SETUP 2 1 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. Press Cursor button to move to ‘LOGO’ and then press ENTER button. To select one of the 3 wallpaper settings you've made 5 4 Press MENU button to exit the setup screen.
GB L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R) Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 40 SETUP 2 1 In Stop or no disc mode, press MENU button.
GB 42 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.
GB • The adjustments will appear on the main unit's display, not on your TV screen. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB.
GB 46 SETUP 45 12 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. • When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button.
GB 48 SETUP 47 Press PL II MODE button. PRO LOGIC II • MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
GB 50 49 • "DSP" appears on the display panel. • Each time the button is pressed, the selection changes as follows: POP, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK. STUDIO : Provides a sense of presence as if in a studio.
GB 52 RADIO OPERA TION 51 To tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 51 to automatically or manually tune in to a station. 2 1 • “PRGM” flashes in the display. 3 Example: Presetting FM 89.
GB You can receive a DAB (Digital Audio Broadcasting) broadcast with clear CD-quality audio and text captions. However, because DAB broadcasting is still in testing phase, you can receive the broadcast only in limited areas. What is DAB? DAB stands for digital audio broadcasting.
56 55 GB 2 1 • " PRGM " will blink on the display. 3 Example: Storing the service name "ALPHA1" to the service number 3 Press TUNING/CH to select the service. Press DAB to select " DAB ". • " PRGM " disappears from the display and the station will be stored.
GB 58 57 PTY (Program T ype) indication and PTY-SEARCH function To search for a program using the PTY codes Before you start, remember... • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press PTY SEARCH while searching.
GB • Each time the button is press, the brightness changes as follows: DARK ➞ BRIGHT . TITLE CHAP PRGM RDS RT ST TUNED kHz MHz You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER button.
GB 62 • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking.
GB 64 MISCELLANEOUS Code Language Code Language Code Language Code Language 1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Samoan 1032 Afrikaa.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung HT-BP10 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung HT-BP10 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung HT-BP10 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung HT-BP10 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung HT-BP10, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung HT-BP10.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung HT-BP10. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung HT-BP10 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
