Manuale d’uso / di manutenzione del prodotto VE726 del fabbricante Audiovox
Vai alla pagina of 33
0 • Slot-in DVD Player & 7” TFT LCD Monitor • Multi-function Remote Control • Cable Ready 125 Channel TV T uner • AM/FM Radio • 2 A/V Inputs • Internal S tereo S peakers • Under Ca.
INTRODUCTION W A RNING – T o prevent fire or shock hazard, do not expose this unit to moisture. CAUTION CAUT ION : TO REDU CE THE RI SK OF ELECTR IC SHOCK, D O NO T REMOVE CO VER (OR BAC K).
INFORMA TION Installation of this equipment shall be in strict acco rdance with the manufacture’s instructions. Failure to follow these instructions may cause or result in the reception of unwanted interference.
IMPORT ANT SAFETY INFORMA TION 1. Read Instructions – All the safe ty and operating instructions should be read before the product is operated. 2. Ret ain Instruct ions – The safety and operating instructions should be retained for future reference.
4 13. Power-Cord Protection – Route the po wer supply cord in a manner that protects it from being stepped on or pinched by items placed on it. Pay particular attention to the po wer cord’ s plug, and the point where the power cord exits from the product.
21. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement part s specified by the manufacture r or that have the same characteristics as the original part. Unauthorized subs titutions may result in fire, el ectric shock or other hazards.
TABLE OF CONTENTS Before You Begin Installation Remote Control Functions Modes of Operation Using the DVD Loader Technical Specifications Troubleshooting Check List Introduction 1 Important Safety Inf.
CONTENTS OF P ACKAGE 7 1. VE726 re bag g screws (4) (4) (4) 3. Re er (4) 2. Hardwa A. 2” Mountin B. 2-1/2” Mounting screws C. 3”Mounting screws (4) D. Foot (4) E. Hole cap mote Control 4. Multi Height Sp ac 5. Ba tt er ie s ( AAA) na Adaptor le T emplate al 6.
UNDER CABINET INST ALLA TION 1) Choose an ap propriate m ounting locati on undernea th a cabinet o r shelf. Clos e proximity to an electrica l outlet, TV antenn a or cable con nection will fac ilitate a n eat, easy inst allation. Do not mount the VE726 above a ran ge or ov en.
COUNTERTOP/DESKT OP INST ALLA TION NOTE: Use caution to avoid damaging the LCD screen and the main unit when converting this unit from an under-counter unit to a countertop unit. Leav e the protective plastic on the screen until this procedure is completed.
FRONT P ANEL CONTROLS cm 1) ON/OFF BUTTON – Power ON/OFF . 2) SET BUTTON – Press this button to set the TIME, ALARM, TV Mode or Speaker Mode. 3) ADD BUTTON – Press this button to add a selected TV channel. 4) DEL BUTTON – Press this button to delete a selected TV channel.
16) SEEK BUTT ONS ( TS -Right Side) – Press these buttons to go to next available channel with sufficient signal strength. 17) CHA NNEL BUTTONS ( TS -Lef t Side) – Press these buttons to go to next available channel. 18) DISPLA Y WINDOW – Displays the channel/station number , time, and selected source.
12 1. MENU Button – When pressed, the LCD control MENU is displayed. m to be changed using 3. item in upward 4. rolls downward through menu items; also adjusts selected item; in NO ttings to the factory settings, highlight RESET and press the LCD Control Functions 2.
8) BA TTER Y INST ALLA TION 13 (Rear View , Battery Size AAA).
REMOTE CONTROL FUNCTIONS (1) EJECT (2) DVD (3) TV (4) SETUP (5) SEEK DN, SEEKUP (6) MENU (7) FR( WW ) (8) STOP( ■ ) (9) PREV (I WW ) (10) Digit 0-9 Select (11) TITLE (12) DISPLA Y (13) SUB TITLE (14.
15 cha DVD REMOTE FUNCTION (1) EJECT : Press this button to Eject and Load the disc tray . (2) DVD: Press this button to select DVD mode of operation. (4) SETUP : Displays setup menu for initial user settings. (5) SEEK DN/UP (21) CH+/- : For selecting item on menu.
16 ban TV REMOTE FUNCTION (3) TV : Press this button to select TV mode. (5) SEEK DN/UP : Use these buttons to advance to the next higher or lower station. (10) 0~9 : Use these buttons to make a direct channel selection (15) SCREEN : Press this button to change the Display Mode.
OPERA TION INITIAL SETUP This unit defaults to cable TV mode. When the unit is first pow ered on, it will detect the cable system and auto-program the TV tuner to the available st at ions. Please wait while the unit auto-programs before attempting to operate the unit.
18 SETTING and A CTIV A TING the A LARM NOTE: The VE726 must be turned “OFF” when performing the following procedure. 1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode. NOTE : If a series of dashes appear (--: --), the Alarm is DEACTIV A TED.
19 SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display . 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC).
USING THE DVD PLA YER Inserting and Ejecting the Disc 1. Set the unit to DVD mode (press sour ce button unt il (-----------) appear s on the display . 2. Insert the disc with the label facing up. 3. The disc will begin playing automatically . If this is a DVD it will go to the DVD root menu.
21 Repetitive Play back –T o Repeat a Specific Section 1. Press the REPEA T button once to enable the REPEA T selection screen, follow by pressing the REPEA T button until REPEA T CHAPTER is displayed, the current chapter or track will be replayed repetitively (CHPTER REPEA T ON).
22 Viewing Different A ngles Angle indicator appears on the upper part of the LCD display . Wh en the Angle indicator appears, press the ANGLE button to view the screen from various angles. * This function may not be incorporated in some titles. Viewing the Main Disc Menu A DVD is divided into sections called titles and ch apters.
During playback press DISPLA Y to display the cu rrent disc play back information. Press display again to remove the display . 1. The type of disc. 12. The number of current subtitle language. 2. The number of current title. 13. The speed at wh ich the disc is being read.
PLA YING AUDIO CDS When playing an audio CD the display will automatic ally display the disc play back information. The options below show you what information is displayed. Press the ‘DISPLA Y’ button to remove the display . 1. The current track.
25 1. Press the f or g button to choose a folder from the folder list on the left side of the screen. 2. Press ENTER to select the highlighted folder. All songs available under the selected folder 3. r g button to choose a song from the list, then press ENTER to play the selected 3.
26 PLA 2. Select JPEG file by pressing the “UP/DOWN” button. the JPEG file by pressing “Play” or “ENTER”. will rotate the JPEG in that direction. oto horizontally by pressing the “Up” “Down” button. SETUP Th ttings. Follow the basic steps below r each setup menu selection.
27 3. Use the f or g buttons to highlight the desired menu item. 4. Press ENTER button to display the sub-menu. 5. Each sub-menu item provides a number of option items to it s right. Use the f or g buttons 6. Press the ENTER button to select the option item.
VIDEO Menu 1. Press the SETUP button to display the main menu (see sample screen under LANGUAGE Menu) 2. Press the d button to highlight Vide o and press ENTER one time. Use the following screen to select screen aspect ratio. * 4:3 PS : When the player is connected to a normal TV , and a wide picture is shown on the full screen.
Rating Menu Press the SETUP button to display the ma in menu (see sample screen under LANGUAGE Menu). Use to select parent al Rating: 1 Kid Safe. 2 G. 3 PG . 4 PG-13. 5 PG-R. 6 R. 7 NC-17. 8 Adult. CHANGE P A SSWORD & RA TING 1. Select Rating by h or d buttons and press ENTER to enter the Rating setup page 2.
TECHNICAL SPECIFICA TIONS GENERAL Power Supply : AC100-240V ~50/60Hz 40watts Operating T emperature : 0 ° ~40 ° C / 32 ° ~104 ° F Operating Humidity : 10% ~ 75% Body Size : 400 X 280 X 56mm / 15.8” x 1 1.0” x 3.25” Inches Weight : 3.4 Kg / 7.
Problem Solution Power does not turn on • Check if the power cord is securely plugged into the wa ll • Check if the batteries of the remote control unit are not depleted. Disc fails to play • Check if the disc is inserted properly into player (Label Side Up).
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products A U D I O V O X E L E C T R O N I C S C O R P . (the Com pany) warrants to the original ret ail purchaser of this pr oduct that should this p.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Audiovox VE726 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Audiovox VE726 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Audiovox VE726 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Audiovox VE726 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Audiovox VE726, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Audiovox VE726.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Audiovox VE726. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Audiovox VE726 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
