Manuale d’uso / di manutenzione del prodotto XP1000 del fabbricante Samson
Vai alla pagina of 24
Owner's Manual 1 00 0- W A T T PO R T A B L E P A S Y S T E M XP 1 000 E P ED ITI O N.
Copyright 2014 v1.3 Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .samsontech.com The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
XP1000 • Portable P A System Important Safety Information W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE P AR TS INSIDE.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu- facturer’ s instructions.
XP1000 • Portable P A System Important Safety Information FCC Notice 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the follow- ing two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
C ontents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 XP1000 Mixer Layout . . . . . . . . . . . . . . . . . . . . . . . . 9 Pairing with a Bluetooth® device .
7 XP1000 • Portable P A System Thank you for purchasing the Expedition XP1000 POR T ABLE P A SYSTEM from Samson! The XP1000 delivers the optimum balance between huge, awesome sound and portability .
8 The Samson Expedition XP1000 is a compact portable P A system with dual 2-way speakers, onboard mixer and 1000 watt power amplifier . Here are some of the main features: • Lightweight and designed to allow you to connect all the pieces together into a sin- gle, easy to move case.
9 XP1000 • Portable P A System XP1000 Mix er L ay out 1 3 4 5 6 7 8 2 9 11 12 13 14 15 16 22 20 21 23 10 19 17 18 1. Channel Input Jacks (channels 1 - 4) MIC – XLR connector – Use these XLR jacks to connect low impedance microphones to the XP1000’ s built-in mic preamps.
10 XP1000 Mix er L ay out 5. Equalizer control knobs HIGH Frequency – The HIGH knob controls the amount of treble applied to each channel. The channel’ s high frequency response is flat when the knob is in the cen- ter detent (12:00) position.
11 XP1000 • Portable P A System XP1000 Mix er L ay out frequency response, or tone contour , for the XP1000 sound system. If your appli- cation is mainly for music, press the switch down to select the MUSIC response curve. If your application is mainly for spoken word, leave the switch up to select the SPEECH response curve.
12 Bluetooth ® is a wireless communication technology that allows for connectivity between a wide range of devices. The XP1000 uses Bluetooth to stream high quality audio from your Bluetooth enabled device without the need for connecting any cables. In order for your device to work with the XP1000 it must first be paired.
13 XP1000 • Portable P A System Set ting Up the XP1000 Unpack all the system components from the shipping carton and save all packing materials in the event your unit ever needs to be returned for service. Remove the mixer by turning the quarter turn screw counterclockwise towards the RELEASE position.
14 Position the speakers on the floor or on stands. Set ting Up the XP1000 Using one of the included speaker cables, connect the mixer’ s LEFT SPEAKER OUT to the left speaker’ s input connector . Next, use the second included speaker cable to con- nect the RIGHT SPEAKER OUT to the right speaker’ s input connector .
15 XP1000 • Portable P A System Quick Start 1. Be sure that the XP1000’ s POWER switch is set to the OFF position. 2. If the speakers are not connected, connect the speaker wires as described in the previous section. 3. T urn each of the channel LEVEL and MASTER volume controls fully counterclock- wise, to the “0” position.
16 XP1000 Quick Start 9. If you notice that the LIMITER indicator is lighting constantly , turn the MASTER volume down so that the indicator only lights occasionally during loud hits. 10. T o add depth to the mix or smooth out the vocals, you can apply effects such as reverb to channels 1–4.
17 XP1000 • Portable P A System Applying Ef fects The XP1000 features built-in, high quality , 24-bit digital effects that you can add to channels 1 through 4. Y ou can use effects like delay or reverb to enhance vocals or ambiance to the mix by following the steps below: 1.
18 Plug the RXD1 USB receiver into the Channel 4 USB jack labeled WIRELESS. On the wireless handheld transmitter , unscrew the bottom section of the microphone by turning it counterclockwise and then slide it off.
19 XP1000 • Portable P A System If the handheld transmitter and receiver have not been previously paired, press and hold the button on the RXD1 receiver for >5 seconds, until it begins to flash. Press and hold the Power button on the handheld transmitter >5 seconds.
20 There are several ways to interface the XP1000 to support a variety of applications. The XP1000 features balanced inputs and outputs, so connecting balanced and unbalanced signals is possible.
21 XP1000 • Portable P A System Wiring Guide Unbalanced ¼” Connector Balanced TRS ¼” Connector XLR Balanced Connector Signal Ground Ground Sleeve (ground) Signal T ip (signal) +Signal (tip) +S.
22 Specications Amplifier Power (0.5% THD at 1KHz) 1000 W @ 4Ω (500 W per channel) Peak 500 W @ 4Ω (250 W per channel) Average Frequency Response 20 Hz - 20 kHz Power Consumption AC INPUT 100V~240V ,50/60Hz 800W Speakers Low Frequency 10” bass transducer High Frequency 1” tweeter Mixer Inputs XLR, ¼” balanced, RCA, 3.
23 XP1000 • Portable P A System Block Diagr am.
Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .samsontech.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samson XP1000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samson XP1000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samson XP1000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samson XP1000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samson XP1000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samson XP1000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samson XP1000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samson XP1000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
