Manuale d’uso / di manutenzione del prodotto PS9 del fabbricante Samson
Vai alla pagina of 16
® O WNERS MANU AL 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 15.0 85 95 105 110 115 117 120 124 127 130 LIGHT OUTLETS UNSWITCHED 15 AMPERES SAMSON PowerBrite Pro7 AMMETER VOLTMETER PUSH PUSH SAMSON OUTLE.
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1997, 1998, Samson Technologies Corp. Printed March, 1998 Samson Technologies Corp.
Intr oduction Congratulations on purchasing your Samson PowerStrip, PowerBrite, or PowerBrite Pro! This manual covers three products: the PowerStrip PS9; the PowerBrite PB9; and the PowerBrite Pro7.
System Featur es The Samson PowerStrip PS9, PowerBrite PB9, and PowerBrite Pro7 all utilize state-of-the-art technology in power distribution and are engineered to the finest detail.
Guided T our - PowerStrip PS9 Fr ont Panel 1: Outlets switch - Use this to turn the rear-panel outlets on or off. When on, the status light inside this switch is lit red. 2: Unswitched convenience outlet - This 3-pin AC outlet is active whenever the PS9 is plugged in, regardless of the setting of the Outlets switch (see #1 above).
Guided T our - PowerStrip PS9 Rear Panel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on and off from the front panel Outlets switch (see #2 on the previous page).
7 Guided T our - PowerBrite PB9 Fr ont Panel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the LED inside this switch lights red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.
8 Guided T our - PowerBrite PB9 Rear Panel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on and off from the front panel Outlets switch (see #2 on the previous page).
Guided T our - PowerBrite Pr o7 Fr ont Panel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the status light inside this switch is lit red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.
Guided T our - PowerBrite Pr o7 Rear Panel 1: Lamp switch - Used to turn on or off a connected Littlite ® - compatible lamp (see #2 below). 2: Lamp connector - If required, you can connect a Littlite ® - compatible lamp to this 12 VDC female XLR jack.
11 Setting Up and Using Y our PowerStrip or PowerBrite Setting up your PS9, PB9, or Pro7 is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of need for future service) and install the unit in a standard 19" rack.
12 Changing the PowerBrite Bulb The 4-watt fluorescent bulb in your PowerBrite PB9 and Pro7 is rated to deliver approximately 3,000 hours of operation. That ’ s a long time, to be sure, but there will probably come a time when you ’ ll need to replace it.
13 Specifications Electrical: Number of Outlets PS9 and PB9 8 switched, 1 unswitched Pro7 6 switched, 1 unswitched Max. Current 15 Amp (circuit breaker protected) Input Voltage (RMS) 0 to 130 Vac continuous Spike Protection Mode Hot to Neutral, Hot to Ground, and Neutral to Ground Max.
Appendix A: Fluor escent Or Incandescent? There are numerous advantages to using the kind of fluorescent lighting provided by the PowerBrite PB9 and PowerBrite Pro7 over the incandescent lighting provided by competing rack light products.
Congratulations and thank you for purchasing the SAMSON P owerBrite Pr o ™ or P o werBrite ™ Get Y our Nameplate Customized! Illuminate any image that will fit within the available space—4 1/8 ″ wide x 3⁄4 ″ high. Personalize your front nameplate by following the instructions: YOUR L OGO 4 1/8" 4 1/2" 7/8" 3/4" 1.
Changing the PowerBrite Nameplate After you have received your new Neo-Rack film, it ’ s a simple matter to install it. Begin by unplugging your PowerBrite and then unplug all devices connected to the rear and/or front panel outlets.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samson PS9 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samson PS9 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samson PS9 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samson PS9 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samson PS9, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samson PS9.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samson PS9. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samson PS9 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
