Manuale d’uso / di manutenzione del prodotto SS30 RY30140 del fabbricante Ryobi
Vai alla pagina of 26
Y our new trimmer has been engineered and manufactured to our high standar d for dependability , ease of operation, and operator safety . Properly car ed for , it will give you years of rugged, trouble-free performance. WARNING: T o reduce the risk of injury , the user must r ead and understand the operator’ s manual befor e using this product.
2 Introduction ..................................................................................................................................................................... 2 � General Safety Rules ...................................
3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failur e to foll ow all instructions listed below may result in electric shock, fir e and/or serious personal injury . READ ALL INSTRUCTIONS For safe operation, r ead and understand all instructions before using this product.
4 SPECIFIC SAFETY RULES SPECIFIC SAFETY RULES FOR TRIMMER USE Replace string head if cracked, chipped, or damaged in any way . Be sure the string head or blade is pr operly installed and securely fastened. Failur e to do so can cause serious injury .
5 SYMBOLS 50' 15m 50' 15m Some of the following symbols may be used on this tool. Please study them and lear n their meaning for safe operation of this product. SYMBOL NAME EXPLANA TION Safety Alert Symbol Precautions that involve your safety .
6 SYMBOLS SERVICE Servicing r equires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you r etur n the product to your near est AUTHORIZED SERVICE CENTER for repair . When servic- ing, use only identical replacement parts.
7 FEA TURES PRODUCT SPECIFICA TIONS W eight - (without fuel) CS30 .................................................................................................................................................... 10.7 lbs. (4.9 kg.) SS30 ...........
8 FEA TURES Fig. 1b Fig. 1c THROTTLE TRIGGER FRONT HANDLE COUPLER DRIVE SHAFT HOUSING STRING HEAD STRAIGHT SHAFT GRASS DEFLECTOR THROTTLE TRIGGER “J” HANDLE COUPLER DRIVE SHAFT HOUSING BLADE BRUSH.
9 ASSEMBL Y FEA TURES KNOW YOUR STRING TRIMMER See Figures 1a - 1c. Before attempting to use this product, familiarize yourself with all ope rating features and safety rules.
10 INST ALLING THE POWER HEAD TO THE A TT ACHMENT See Figure 2. WARNING: Never install, remove, or adjust any attachment while power head is running. Failure to stop the engine can cause serious personal injury . The attachment connects to the power head by means of a coupler device.
11 A TT ACHING THE FRONT HANDLE - CS30 AND SS30 See Figure 4. Remove 2 wing nuts, 2 bolts, and clamp from the fr ont handle. Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position. Place the bolt through the fr ont handle.
12 A TT ACHING THE GRASS DEFLECTOR WARNING: The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury . TO A TT ACH THE CURVED SHAFT GRASS DEFLECTOR - CS30 See Figure 6.
13 A T T A CH I N G TH E S H OU L D E R H A R N E SS - BC30 See Figure 9. Connect the latch on the shoulder har ness to the strap hanger . Adjust the strap to a comfortable position.
14 ASSEMBL Y REMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD See Figures 10 - 13. Align the slot in the flanged washer with the slot in the gear head. Place the gear head locking tool through the slot in the flanged washer and gear head.
15 FUELING AND REFUELING THE TRIMMER FUEL MIXTURE This product is power ed by a 2-cycle engine and requires pr e-mix ing gasoline and 2-cycle oil. Pre- mix unleaded gaso - line and 2-cycle engine oil in a clean 1 gallon container ap- proved for gasoline.
16 WARNING: Always hold the string trimmer away from the body keep- ing clearance between the body and the product. Any con ta ct wi th the housi ng or st rin g tr imm er cutti ng head can result in burns and/or other serious personal injury .
17 Inspect and clear the area of any hidden objects such as glass, rocks, concr ete, fencing, wire, wood, metal, etc. Never use blades near sidewalks, fencing, posts, build- ings or other immovable objects. Never use a blade after hitting a har d object without first inspecting it for damage.
18 OPERA TION ST ARTING AND STOPPING See Figures 21 - 23. TO ST ART A COLD ENGINE: DO NOT squeeze the thr ottle trigger until the engine starts and runs. Lay the trimmer on a flat, bare surface. PRIME - Press the primer bulb 7 times. SET the start lever to the ST ART position.
19 MAINTENANCE Fig. 24 SPOOL RET AINER Fig. 25 SPRING SLOTS STRING HEAD EYELETS SHAFT Remove the empty spool from the string head. Keep the spring attached to the spool. T o install the new spool, make sure the two strings are captured in the slots opposite each other on the new spool.
20 T o install the spool retainer: T ur n the spool retainer clockwise for model CS30. T urn the spool retainer counter clockwise for models SS30 and BC30.
21 MAINTENANCE C L E A N I N G T H E E X H A U S T P O R T A N D MUFFLER NOTE: Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port, muffler , and/or spark arrestor screen may become blocked with carbon deposits.
22 PROBLEM POSSIBLE CAUSE SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT ACT YOUR AUTHORIZED SERVICE DEALER. TROUBLESHOOTING 1 . Ch e ck s pa r k . R e mo ve s p a r k p lu g . R e at t a c h the s park p lug ca p and lay s park plug on metal cylin der .
23 PROBLEM POSSIBLE CAUSE SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT ACT YOUR AUTHORIZED SERVICE DEALER. TROUBLESHOOTING 1 . Clean thre ads and l ubri cate with g reas e - if no imp rov em ent, re place the s pool re taine r . 1 . Cu t t al l g ra s s f ro m t he t op d own t o p rev en t wra pping.
24 W ARRANTY LIMITED WARRANTY ST A TEMENT T echtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI ® brand outdoor product is free from defect in material and workmanship and agrees to repair or replace, at T echtronic Industries North America, Inc.
25 W ARRANTY TECHTRONIC INDUSTRIES NOR TH AMERICA, INC., LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENGINES The U.S. Environmental Protection Agency (EP A), the California Air Resour ces Board (CARB), and T echtronic Industries North America, Inc.
TECHTRONIC INDUSTRIES NOR TH AMERICA, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622 Phone 1-800-860-4050 www .ryobitools.com • SERVICE Now that you have pur chased your tool, should a need ever exist for r epair parts or service, simply contact your nearest Authorized Service Center .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Ryobi SS30 RY30140 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Ryobi SS30 RY30140 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Ryobi SS30 RY30140 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Ryobi SS30 RY30140 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Ryobi SS30 RY30140, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Ryobi SS30 RY30140.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Ryobi SS30 RY30140. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Ryobi SS30 RY30140 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
