Manuale d’uso / di manutenzione del prodotto RS910W del fabbricante RuggedCom
Vai alla pagina of 31
RuggedCo m Inc. I 30 Whitmore Road, Woodbridg e, Ontario, C anada L4L 7Z4 Tel: (905) 85 6-5288 I Fax: (905) 856-19 95 I Tol l Free: (888) 26 4-0006 Rugged Rugged Rugged Rugged Wireless Wireless Wirele.
2 2007 RuggedCo m Inc. All rights reser ved Rev100 Federal Communicati ons Commission Radio Frequency Inter ference Statem ent This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
3 2007 RuggedCo m Inc. All rights reser ved Rev100 Table of Contents 1 Product Overview ............................................................................................................................... 5 1.1 Functional Overview .....
4 2007 RuggedCo m Inc. All rights reser ved Rev100 Table of Figures Figure 1 - RS910W Front Pa nel Descrip tion.............................................................................................. 6 Figure 2 - RS910W Bottom Panel Descrip tion .
5 2007 RuggedCo m Inc. All rights reser ved Rev100 1 Product O verview 1.1 Functional Ove rview The RuggedWireless™ R S910W is an industrially hardened Wireless Serial/Ethe rnet Device Server that h as be en specifically designed to o perate reliably in electrically harsh a nd climatically demanding environments.
6 2007 RuggedCo m Inc. All rights reser ved Rev100 1.3 RS910W Front P anel Descript ion Failsafe Relay Power Port Ports 1 & 2 RS485/422/232 Serial Or Serial over Fiber Ports 3 & 4 10/100Ba.
7 2007 RuggedCo m Inc. All rights reser ved Rev100 1.4 RS910W Bottom P anel Description Failsafe Relay Console Port Power Port Chassis Ground Optional Din-Ra il Mounting Brack et Figure 2 - RS910W.
8 2007 RuggedCo m Inc. All rights reser ved Rev100 2 Inst allation 2.1 Din Rail Mounting An optional DIN rail mounting bracket is available for the RS910W.
9 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2 Power Supp ly Wiring and Grou nding 2.2.1 A C Power Suppl y Wiring and Groundi ng Figure 4 - RS910W Power Supply In puts The RS910W AC power supply inputs should be connected as follows: 1. +/L should be connected to AC Line/Hot.
10 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2.2 DC Power Suppl y Wiring and Groundi ng Figure 5 - DC Power sup ply wiring and grounding diagram The RS910W low voltage DC power supply features reverse polarity protection and dual independent inputs.
11 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2.3 Dielectric Strength Testing Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the braided ground cable disconnected during the test.
12 2007 RuggedCo m Inc. All rights reser ved Rev100 2.3 Failsafe Output W iring The Failsafe output relay is provided to signal critical error cond itions that may occur on the RS910W. The contacts are energized upon power up of the unit and remain energized until an alarm condition or power loss occurs.
13 2007 RuggedCo m Inc. All rights reser ved Rev100 2.4 RS232 Conso le Port Wiring The RS232 port is used for configuring the RS910W. A straight-through serial cable with a DB-9 connector is required. There is no need to crossover the TxD and RxD signals from the PC side since this has been done internally as is shown in the figure below.
14 2007 RuggedCo m Inc. All rights reser ved Rev100 3 Serial Port s The RS910W can be equipped with a Fiber Serial Interface, RS232/RS485/ RS422 D B9 serial ports or RS232/RS485/RS422 RJ45 serial ports.
15 2007 RuggedCo m Inc. All rights reser ved Rev100 Pi n R S23 2 Mode R S48 5 Mode R S42 2 Mode 1 C D - - 2 T X T X / R X + ( A) T X + 3 R X - R X + 4 D T R - - 5 6 D SR - RX - 7 C T S T X / R X -.
16 2007 RuggedCo m Inc. All rights reser ved Rev100 Pi n R S232 Mode R S48 5 Mode R S42 2 Mode 1 D SR - RX - 2 D C D - - 3 D T R - - 4 5 R X - R X + 6 T X T X /RX + (A) T X + 7 C T S - - 8 R T S T.
17 2007 RuggedCo m Inc. All rights reser ved Rev100 Figure 12: Co nceptual recom mended RS485 wiring d iagram 3.1.5 Serial Port Transie nt Protection RuggedCom does not recommend the use of copper cabling of any length for critical real-time substation automation applications.
18 2007 RuggedCo m Inc. All rights reser ved Rev100 4 Ethernet Port s 4.1 RJ45 Ethernet Por ts The RS910W has several 10/100Base-TX ports that allow connection to standard category 5 (CAT-5) unshielded twisted-pair (UTP) cable with RJ45 male connectors.
19 2007 RuggedCo m Inc. All rights reser ved Rev100 RuggedCom also does not recommended to use these ports to interface to field devices across distances which could produce high levels of ground potential rise, (i.e. greater than 2500V) during line to ground fault conditions.
20 2007 RuggedCo m Inc. All rights reser ved Rev100 Figure 19: Eth ernet panel LED de scription.
21 2007 RuggedCo m Inc. All rights reser ved Rev100 5 T echnical Specifications 5.1 Operating Envi ronment Parameter Range Comment s Ambient Operating Tem perature -40 to 85 ° C Ambient Temperatu re as measured from a 30 cm radius surrounding the ce nter of the RS910W enclosure.
22 2007 RuggedCo m Inc. All rights reser ved Rev100 5.4 Wireless Standard s Supported Standard P arameter Mode Notes IEEE 802.11g 54 Mbps (WLAN) Full Access Point 2.4 Ghz ISM IEEE 802.11b 11 Mbps (WLAN) Client support Backwards compatibility IEEE 802.
23 2007 RuggedCo m Inc. All rights reser ved Rev100 Regulatory Dom ains Channel Ide ntifier Frequency (in MHz) America (-A) EMEA (-E) Japan (-J ) Rest of World (- W) 1 2412 X X X X 2 2417 X X X X .
24 2007 RuggedCo m Inc. All rights reser ved Rev100 5.7.2 Fiber Optic Ports Parameter Specifications Mode Multimode Connector ST Typical Dist. (km) 5 Optical Wavelength (nm) 820 Cable Size Core/Cladding (um) 50/125 62.5/125 Table 10: F iber Optic Port Specific ation NOTES: 1.
25 2007 RuggedCo m Inc. All rights reser ved Rev100 Speed Standard Mode / Connecto r Tx λ λ λ λ (nm) Cable Type 2 ( µ µ µ µ m) Tx Pwr (dBm peak ) 3 (Min / Max) Rx Sensitivity (dBm Average) 3 Rx Saturation (dBm Peak) 3 Typical Distance (km) 1 Power Budget (dB) 100Base-FX MM / ST 1310 5 0/125 -15.
26 2007 RuggedCo m Inc. All rights reser ved Rev100 5.10 Mechanical Specif ications Figure 20 - M echanical Specif ications Table 14 - M echanical Specif ications Parameter Value Dimensions 16.8 x 11.7 x 6.6 cm / 6.6 x 4.6 x 2.6 i nches Weight 1.2 kg / 2.
27 2007 RuggedCo m Inc. All rights reser ved Rev100 6 T ype T est s 6.1 IEC 61850-3 Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15kV 4 IEC 61000-4-3 Ra diated RFI Enclosure ports 20 V/m x Signal ports +/- 4kV @ 2.
28 2007 RuggedCo m Inc. All rights reser ved Rev100 6.2 IEEE 1613 Type T ests Test Description Test Levels Enclosure Contact +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/- 15kV IEEE C37.90.2 Ra diated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.
29 2007 RuggedCo m Inc. All rights reser ved Rev100 7 W arrant y RuggedCom warrants this product for a period of five (5) years from date of purchase. For warranty details, visit http://www.ruggedcom.com or contact your customer service representative.
30 2007 RuggedCo m Inc. All rights reser ved Rev100 8 Appendix A - R uggedWireless ™ Frequen tly Asked Questions (F AQ) What factors can affect wireless coverage/range? Range e stimates are typical and require line of sight. Basically that means you will n eed a clear unobstructed view o f the ante nna fr om the rem ote point in the link.
31 2007 RuggedCo m Inc. All rights reser ved Rev100 dBm Watts dBm Watts dBm Watts 0 1.0 mW 16 40 mW 32 1.6 W 1 1.3 mW 17 50 mW 33 2.0 W 2 1.6 mW 18 63 mW 34 2.5 W 3 2.0 mW 19 79 mW 35 3.2 W 4 2.5 mW 20 100 mW 36 4.0 W 5 3.2 mW 21 126 mW 37 5.0 W 6 4 mW 22 158 mW 38 6.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il RuggedCom RS910W è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del RuggedCom RS910W - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso RuggedCom RS910W imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul RuggedCom RS910W ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il RuggedCom RS910W, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del RuggedCom RS910W.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il RuggedCom RS910W. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo RuggedCom RS910W insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
