Manuale d’uso / di manutenzione del prodotto D1708 del fabbricante Audiovox
Vai alla pagina of 32
D1708 D1708 D1708 D1708 D1708 PORT ABLE 7" LCD MONITOR AND DVD PLA YER 128-6895.
2 A. Introduction Thank you for choosing the 7” portable DVD player . The main fea- tures include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player . The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home.
3 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only . 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction.
4 C. Contents 1. 1 x 7’’ LCD Monitor & DVD Player Combo 2. 1 x AC to DC Adapter 3. 1 x Remote Control with battery (CR2025) 4. 1 x Instruction Manual 5. 1 x Audio/Video Cable 6. 1 x Cigarette Lighter Adapter 7. Rechargeable Battery D. Powering and installation 1.
5 1. Unit V iew (Refer to Figure 2) Figure 2 1) MENU 2) Up Button 3) Left Button 4) Down Button 5) OK Button 6) Right Button 7) Open Button 8) Previous Button 9) S top Button 10) Next Button 1 1) Play.
6 2. Remote Control V iew (Refer to Figure 3) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) Return Button 8) A-B Button 9).
7 G. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. Figure 4. Main SETUP Menu Screen 1) Press “Setup”, the ‘GENERAL SETUP P AGE’ will display on screen.
8 * NORMAL/PS: When the player is connected to a normal TV , and a wide picture is shown on the full screen. * NORMAL/LB: When the player is connected to a normal TV , and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen.
9 c). Select ‘SCREEN SA VER’ using the UP/DOWN buttons, Figure 8. SCREEN SA VER Display *ON: enables screen saver *OFF: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
10 a).Select “Brightness by using the UP or DOWN buttons ,then press “Enter”you can change the Brightness by pressing the LEFT or RIGHT buttons. T o exit “Brightness Setting”, press “Enter”again to return the main Menu. Figure 1 1. BRIGHTNESS Screen Display b).
11 d).Select “Saturation “ by using the UP or DOWN buttons, then press “Enter” you can adjust the Saturation by pressing the LEFT or RIGHT buttons. Figure 14. SA TURA TION Screen Display T o exit “Saturation”Setting,press “Enter”again to return to the main Menu 3).
12 4 ) . With no disc inside the player select ‘PREFERENCES’ using the LEFT or RIGHT buttons, then press ‘ENTER’ to enter the preferences page. Figure 18. Preference Audio Language a. Select ‘AUDIO’ using the UP/DOWN buttons, then press ‘RIGHT’ to enter the submenu.
13 Figure 20. Preference DISC MENU LANGUAGE Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original recorded language contained in the disc.
14 Figure 22. Loading Factory Setting NOTE: The Default Password is 3308 . This password is always effective even after you have selected your own password and changed it.
15 1. Basic Operation T urn the unit on/off Remove/load the disc S tart Play/Execute item or setting Play at 1/2, 1/4, 1/8 or 1/16 times speed S till Picture (1 time) S top at the present playing poin.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor . The content s of the menu vary from disc to disc. Press MENU during playback to display the menu.
17 c. Press ‘DISPLA Y’ a 3rd time to display the Elap sed T ime for the chapter . The heading will disappear automatically in 3 seconds. d. Press ‘DISPLA Y’ a 4th time to display the Remaining T ime for the chapter . The heading will disappear automatically in 3 seconds.
18 3. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle lan- guage you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language.
19 4. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds.
20 6. A-B REPEA T a. During playback press first time ‘A-B’ to set the Starting Point A. Figure 27. A-B Repeat S tarting Point Screen Display b. Press ‘A-B’second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B.
21 7. REPEA T a. During playback press ‘REPEA T’ once to repeatedly play the cur- rent chapter . Figure 30. Chapter Repeat ON Screen Display b. During playback press ‘REPEA T’ again to repeatedly play the current title. Figure 31. Title Repeat ON Screen Display c.
22 Figure 34. SINGLE ELAPSED Screen Display d. Press “REPEA T” a 4th time, to resume normal play . Figure 33. Repeat Off ON Screen Display 4. PLA YING AUDIO CDS When playing an audio CD press the DISPLA Y button on the remote to view time information.
23 c . Press ‘DISPLA Y’ two times and T OT AL ELAPSED appears along with the current track playing and the total time that the CD has been playing. Figure 36. TOT AL ELAPSED Screen Display d. Press ‘DISPLA Y’ three times and T OT AL REMAIN appears along with the current track playing and the amount of time remaining on the CD.
24 Insert an MP3 CD, the DVD player will initialize the disc and the directory (folder) will be shown on the TV screen. Figure 38. MENU Screen Display When an MP3 disc is inserted into the unit, the menu screen appears automatically . Y ou can use the menu screen to change folders and songs.
25 Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEA T FEA TURE The default mode for the Repeat feature is OFF .
26 a. Press “display” first time, “WIPE TOP” display on the screen, the picture will refresh from top to bottom. b. Press “display” 2nd time, “WIPE BOTTOM” will display on the screen, the picture will refresh from bottom to top.
27 7) When previewing the file, pressing “ANGLE, SUBTITLE, AUDIO, NUMBER, AB, RETURN, REW/FF , SLOW” a hand icon will appear on the display meaning that these options are not available. 8) Press “Stop” to browse the JPG file, “SLIDE SHOW” “MENU” will display on the screen.
28 7. Connecting to a TV or another monitor ( Refer to Figure 39) Y ou can also connect the DVD player to a TV to enjoy high quality stereo sound and picture on another monitor .
29 9. Specifications Supported Media formats: DVD/CD/MP3 Color system: NTSC Screen size: 7’’ DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC) Frequency response: DVD (PCM 96 kHz/24 bits ): 20 Hz to 44 Hz DVD (PCM 48 kHz): 20 Hz to 22 kHz CD: 20 Hz to 20 kHz Video output: 1.
30 battery in optimum condition. Under no circumstances short the bat- tery terminals, store the battery in a metal cont ainer , or leave the battery in a humid or damp environment. Ideally , store the battery in an airtight container with desiccant or other dehumidifying agent.
31 Installing the Battery Pack: 1. First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected. 2. Close the player cover . 3. Align the battery pack with the player module’ s front edge. 4. Push the battery towards the rear of the player until it locks into position.
128-6895 © 2003 Audiovox Electronics Corporation AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Audiovox D1708 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Audiovox D1708 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Audiovox D1708 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Audiovox D1708 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Audiovox D1708, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Audiovox D1708.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Audiovox D1708. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Audiovox D1708 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
