Manuale d’uso / di manutenzione del prodotto RM185-OR1 del fabbricante REVO
Vai alla pagina of 28
18.5-INCH WIDE LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference..
.
SAFETY INSTRUCTIONS ………………………………………………………….….. 2 ~ 3 CAUTIONS …………………………………………………………….......... ................ 4 FCC RF INTERFERENCE STATEMENT …………………………….
Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this monitor near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Inst all in accordance with the manufacturer ’s instructions.
- The monitor shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “W ARNING – T o reduce the risk of fire or electric shock, do not expose the monitor to rain or moisture.
NEVER REMOVE THE BACK COVER ▶ Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS ▶ To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a residential installation.
Before setting up the monitor , ensure that th e power to the monitor a nd other attached devices are turned off. ※ Notice: Stand & screws are optional. A. Connecting the stand 1. Place the monitor with its fron t facing downward on a soft cloth.
1. Rear Connection 1. 3.5mm AUDIO OUT. 2. 3.5mm AUDIO IN. 3. VGA. 4. DC 12V. - 7 -.
2. Bottom Key Control 1. SELECT Selects an option in the OSD. (On Screen Display) 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3, 4. AUTO/ ▼ & ▲ Moves another option in the OSD. The ▲ button converts the aspect ratio as 16:9 or 4:3.
OSD (On Screen Display) Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲ / ▼ buttons to select the desired option.
2. Image Setting Option Function Value Clock 1) Adjusts the vertical noise of screen image. 0 ~ 100. Phase 1) Adjusts the number of horizontal picture elements. 0 ~ 60. Gamma Adjusts the gamma of the picture. 0 ~ 3. Sharpness Adjusts sharpness of the picture.
3. Position Option Function Value H. Position Adjusts the horizontally picture position. 0 ~ 100. V. Position Adjusts the vertically picture position. 0 ~ 100.
4. OSD (On Screen Display) Menu Option Function Value OSD H. Pos. Moves the horizontally OSD position. 0 ~ 100. OSD V. Pos. Moves the vertically OSD position.
5. Language Option Function Value Language Sets the language of OSD menu. English, Korean, French, German & Spanish. - 13 -.
6. Misc. Option Function Value Signal Source Shows the signal source. VGA Fit to screen Converts the aspect ratio. 16:9 & 4:3 Volume Adjust the level of audio volume. 0 ~ 100. Reset Resets the monitor settings to the factory default. Back Returns to previous menu.
7. Exit Option Function Exit Exits the OSD menu. - 15 -.
W all mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included). ※ Attention! Y ou must use four M4x10 screws to assemble this monitor and the wall mount bracket.
P ▶ in Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1.
This monitor features a pow er management system to “power down” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card perfo rms this signaling system through not sending horizontal, vertical, or sync signal.
18.5” LCD Type 18.5 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch( ㎛ ): 300(H) x 300(V) Brightness: 250cd/ ㎡ (Typical) Contrast ratio: 1000:1(Typical) Viewing angle: 170°/160°(H/V) Response time: 5ms(Typ.
WEEE Symbols - 20 - Correct Disposal of This Product (Waste Electrical & El ectronic Equipment) (Applicable in the Euro pean Union and other European countries with se parate collection systems) T.
MEMO.
MEMO.
MEMO.
MEMO.
.
P/N: L39ME0230 Rev.0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il REVO RM185-OR1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del REVO RM185-OR1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso REVO RM185-OR1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul REVO RM185-OR1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il REVO RM185-OR1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del REVO RM185-OR1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il REVO RM185-OR1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo REVO RM185-OR1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
