Manuale d’uso / di manutenzione del prodotto H8SX/1520 del fabbricante Renesas
Vai alla pagina of 23
H8SX/1520 Group FP-100M User System Interface Cable User’s Manual Renesas Microcom puter Development Envi ronment System HS1527ECH61H Rev.1.00 Revision Date: Jan.
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp.
i Preface The HS1527ECH61H is a u ser sy stem interface cable that con nects an H8SX/1520 group E6000H emu lator (HS1527KEPH60H ; hereinaf ter referred t o as the em ulator) t o the IC sock et for an FP-100M packag e for the H 8SX/1520 group MC U on th e user sy stem .
ii Contents Section 1 Configuration .................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connecting User Sy stem In terface Cable to Em ulator Station .
1 Section 1 Configuration CAUTION Use an IC149-100- 054-B51 socket (manuf actured by YAMAICH I ELECTRONICS Co., Lt d.) for the FP- 100M package IC socket on the user syst em. Figure 1 s how s the conf iguration of the HS1527ECH 61H user sy stem interface cable f or the FP-100M packag e.
2 Table 1 li s ts t h e HS 1527EC H61H com ponen t s. Pl eas e m ake su re you h ave all of t h es e com ponen ts when unpacking. Table 1 HS1527ECH61H Com p onents No. Component Quantity Remar ks 1 Cable body 1 Cable 2 Cable head 1 3 IC socket 1 For the FP-100M package 4 Socket cover 1 For installing an FP-100M packaged M CU 5 Screws (M 2.
3 Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Emulator Station W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY.
4 2. Af ter mak ing sure the di rection of t he cable body connector i s correct, firm ly ins ert the cable body con nector in to the em ulator st ation socket (figu re 2).
5 2.2 Connecting User System Interface Cable to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
6 2.2.3 I nsertin g Cable Head CAUTION Check the location of pin 1 before inserting. Alig n pin 1 on the IC s ocket for an FP-100M packag e on the u ser sy stem w ith pin 1 on the u ser sy stem interf ace cable head, and in sert the u ser sy s tem interf ace cable head into th e IC socket on the user sy stem , as sh ow n in fi gure 3.
7 Fasten th e user sy stem interface cable h ead to the IC sock et for an FP-100M packag e on the u ser system w ith the four scr ews (M2.6 x 12 m m ; w ith f our flat wa shers) prov ided. Each screw should be tighten ed a little at a tim e, alternating betw een s crew s on opposin g corn ers .
8 2.2.5 Fas tening Cab le Body Connect the cable body to the cable h ead. Cable body Cable head Remove jig Push the remove jigs User system Removing Figure 4 Fastening Cable Body.
9 2.3 Recomm ended Dimensions for User System Mount Pad Figure 5 sh ow s th e recom m en ded dim ension s f or th e m ount pad (footprint) for the user sys tem with an IC s ocket for an FP-100M packag e (IC149-100- 054-B51: m anuf actured by YA MAICHI ELECTRONICS C o.
10 2.4 Dimensions for User System Interface Cable Head The dimen sions for th e user sy stem interface cable h ead are show n in f igure 6. 63.50 66.04 17.
11 2.5 Resulting Dimensions after Connecting User System Interface Cable The resulting dim ens ions, after con necting th e user sy stem interface cable head to th e user sy stem , are show n in figu re 7. 16.0 21.5 Cable head User system Unit: mm Tolerance: ±0.
12 Section 3 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use a Philips-type screwdriver whose head matches the screw head.
13 MCU Pin 1 IC socket (IC149-100-054-B51 manufactured by YAMAICHI ELECTRONICS Co., Ltd.) User system Screws (M2.6 x 6 mm) with flat washers Socket cover Figure 8 Installing M CU to User System.
14 Section 4 Verifying Oper ation 1. Turn on the em ulator according to the procedu res described in th e H8SX/1650 E6000H Emul ator User' s Manu al (HS1650EPH60HE). 2. Verify the user sy stem interf ace cable connections by check ing the pin states w ith the CH ECK comm and (em ulator com m and).
15 Section 5 Notice 1. Make s ure that pin 1 on the user sy stem IC socket is correctly aligned w ith pin 1 on the cable head before insertin g the cable head in to the user sy stem IC socket. 2. This us er sys tem interface cable is specifically des igned for the HS1527KEPH60H em ulator.
16 6. A level- shift circu it with AVcc0 and A Vcc1 is m ounted on th e user sy stem interface cable, as show n i n fig ure 12. A t shipm ent , the jum per pin is insert ed in th e side of pin s 1 and 2 of the P4 short connector.
Renesas Microcomputer Development Environment System User's Manual H8SX/1520 Group FP-100M User System Interface Cable Publication Date: Rev.1.00, January 12, 2005 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.
H8SX /1520 Gr oup F P-100M User Sy stem Inte rface C able HS1527E C H61H U ser’ s Manual.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Renesas H8SX/1520 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Renesas H8SX/1520 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Renesas H8SX/1520 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Renesas H8SX/1520 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Renesas H8SX/1520, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Renesas H8SX/1520.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Renesas H8SX/1520. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Renesas H8SX/1520 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
