Manuale d’uso / di manutenzione del prodotto RTB1100 del fabbricante RCA
Vai alla pagina of 31
USER MANU AL RTB1100 It's impor tant to read this instruction prior to using your new product for the rst time. English IB(A5).indd 1 English IB(A5).
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important Information THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A W ARNING SIGN ALERTING YOU OF “DANGEROUS VOL T AGE” INSIDE THE PRODUCT. THE EXCLAM A TION POINT WITHIN THE TRI- ANGLE IS A W ARNING SIGN ALERTING YOU OF IMPORT ANT INSTRUC TIONS ACC OMP ANYING THE PRODUCT .
Important Information -3- Important Battery Information • Do not mix di erent types of batteries or new and old batteries. Do not use rechar geable batteries. • In order to avoid an y risk of explosion, obser ve the polarities indicated inside the battery compartment.
-4- Impor tant Safety Instructions Please Read and Save for F uture Referenc e. Some of the following information may not apply to your particular product; however , as with any electronic product, precautions should be observed during handling and use.
Connections and Setup Acc essories Provided Subwoofer One Pig-T ail antenna wire Composite video cable One external AM loop antenna Remote control and 2 AAA batteries Center speaker Left and right fro.
AM Loop Antenna 1. Uncoil the AM antenna wire. 2. P ress down on the antennas tab to open the terminal. 3. Make sure the white wire on the AM loop antenna is inserted into the AM loop terminal and the other wire is inserted into the ground loop terminal.
Connections and Setup Connecting to Y our T V (via HDMI input) Connecting A UDIO OUT to an Audio Sy stem (via 2-Channel Analog Audio Output) Connect the AUDIO OUT jacks from the unit to the AUDIO IN jacks on TV, VCR, Stereo system or other audio component.
Connections and Setup Connecting A UDIO IN from External Sources such as TV Using A UDIO IN Jacks Connect the AUDIO IN jacks fr om the unit to the AUDIO OUT jacks on VCR, T V , SA T/Cable Box or other compo nent. Press either SOURCE button on the main unit or AUX button on the remote control to select A UX mode.
Connecting the Speakers Speaker wires are color-coded to match the terminals . Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. P ress down the tab to open the ter- minal and insert the wire.
Connections and Setup Note: Center speaker provided with this unit is magnetically shielded to protect your T V set. It is not recommended to place speakers without magnetic shield near the T V set. 1. Left, Right (Front Speakers) Fr ont speakers carr y primarily music and sound e ects.
Connections and Setup Overview of Contr ols - Fron t Panel C ontrols Better Surround Placement Location If possible, place surround speakers to either side of the listening area, not behind it. Height If space permits, install surround speakers 2-3 feet abo ve viewers.
Overview of Contr ols OPEN/CLOSE Press to open or close the disc tray. ON/STANDBY Press to turn on your unit, or put your unit in standby mode. When your unit is in standby mode, power is still entering your unit. To disconnect power, unplug the power cord.
Overview of Contr ols Note: Insert the t wo “ AAA ” (included with this unit) bat- teries into the remote contr ol prior to use. -13- BD/USB Press to select the BD/USB mode. LEVEL Toggle channels for di erent level settings. Adjusts the value using / .
Basic Playback Oper ations Compatible Discs • Blu-ray Disc • DVD-video (DVD-ROM) • DVD+RW, DVD-RW • DVD+/-R • Audio CDs (CDDA) • JPEG Regional Coding This unit has been designed to play back BD-video with region “A” and DVD-video with region “1”.
-15- Vie wing photographs This unit can display digital photographs les that have been stored on t o a data disc or USB ash drive. 1. Inser t a disc or USB ash drive with photograph. The following menu opens: Settings Pictures Videos 2. Press or button to select Pictures , then press OK button.
-16- Basic Playback Oper ations 3. Press , , or buttons to select a le or folder , then press OK button . If you selected a folder , the les in the folder are displayed. Pr ess , , or buttons to select a le, then press OK button. The following menu appears: Add to Playlist 4.
Basic Playback Oper ations The Setup Menu The Settings menu appears automatically when the unit is in BD/USB stop mode. Language Setting 1. In the main menu of Settings , press button, then use or button to select Language . System Network Audio Display Language Language OSD English Menu Auto Audio Auto Subtitle None Settings 2.
The Setup Menu Notes: • Selecting a resolution the TV does not support could result in an unstable picture or loss of the picture. See the documentation that came with the T V to nd the resolutions the TV supports. • Only the HDMI output on your unit supports 1080p video output at any frame rate.
The Setup Menu -19- Note: Setting the optical audio output’ s PCM downsampling sampling rate too high may result in unpredictable audio playback. If you are not sure, set the rate to 48kHz. Audio Setting 1. In the main menu of Settings , press button, then use or button to select Audio .
-20- Sy stem Setting 1. In the main menu of Settings , press button, then use or button to select System . System Network Audio Display Language Settings System Optical Disc AutoPlay On BD-Live Internet Access Always Allow Access BD-Live Storage internal USB (0.
A UX/OPTICAL T V , VCR, SA T/Cable Box or portable audio players can be connected to AUDIO IN jacks at the back of the unit so that sound from the auxiliary component comes into the unit and out through the speakers.
-22- Radio The unit has a built-in tuner that allows for F M radio function. The AM loop ant enna allows for AM radio function. Manual tuning 1. Connect the FM antenna and the AM loop antenna at the back of the unit. 2. Press TUNER button. 3. Tune a station b y pressing TUNE / buttons repeatedly until the desired station is f ound.
After connecting to the Internet, cannot down- load a le • Erase BD St orage. • Make sure that the internet c onnection is work- ing. • T r y a di erent USB ash drive . File was do wnloaded, but playback from le pauses • Make sure that the USB ash drive is a USB 2.
T roubleshooting I can’ t nd my le in the JPEG listing. • Make sure the le name is valid. The remote con trol does not work or works only intermittently . • Check that batteries are inserted or change them. • Aim the remote control at the unit.
Blu-ray Disc (BD) A disc format developed f or recording/playing high-de nition (HD) video (for HDTV , etc.), and for storing large amounts of data. A single layer Blu- ray Disc holds up to 25 GB, and a dual-lay er Blu-ray Disc holds up to 50 GB of data.
“Blu-ray Disc” and are trademarks. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Dolby , Pro Log ic, and the double-D symbol are trade - marks of Dolby Laboratories.
Additional Inf ormation Speci cations: Ampli er Sec tion: RMS Output Pow er: Dolby Digital Mode with 10% T otal Harmonic Distortion Fr ont, Rear and Center Channel: 167 Watts per channel (1kHz, .
-28- Limited W arran ty A VC MUL TIMEDIA (“ A VC”) makes the following limited warranty . This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the pr oduct.
-29- Out of Warr anty In the event your produc t requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-877-252-6873 or w ww .RCAav .com Hours: Monda y– Thursday: 9am–7pm, F riday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Printed in China 811-110091W010 English IB(A5).indd 32 English IB(A5).indd 32 4/15/2010 20:19:13 4/15/2010 20:19:13.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il RCA RTB1100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del RCA RTB1100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso RCA RTB1100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul RCA RTB1100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il RCA RTB1100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del RCA RTB1100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il RCA RTB1100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo RCA RTB1100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
