Manuale d’uso / di manutenzione del prodotto 13111290 del fabbricante Razor
Vai alla pagina of 14
Owner’s Manu al Read and understand this entire manual before riding! DO NOT RETURN TO STORE! NOTE: The eSpark must be traveling up to 3mph before motor will engage. Kick start up to 3mph while twisting the throttle to engage motor . 13111290 Item Number: NOTE: Manual illustrations are for demonstration purposes only .
SAFETY W ARNINGS Safety Warnings ......................................................... 1-2 Before Y ou Begin ........................................................... 3 Assembly and Set-Up ................................................. 3-5 Connectors/Hardware Maintenance .
PROPER RIDING A TTIRE Always wear proper protective equipment such as an approved safety helmet (with chin strap securely buckled), elbow pads and kneepads. A helmet may be legally required by local law or regulation in your area. A long-sleeved shirt, long pants, and gloves are recommended.
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
4 ASSEMBL Y AND SET -UP q Attaching the Handlebars Charger q Inflating the T ire The front tire is inflated when shipped but it invariably may lose some pressure between the point of manufacturing and your purchase.
CONNECTORS/HARDW ARE MAINTENANCE Safety Gear Always wear proper protective gear such as an approved safety helmet. Elbow pads and kneepads are recommended. Always wear athletic shoes (lace-up shoes with rubber soles), never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system.
6 Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www .razor .com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific T ime. REP AIR AND MAINTENANCE T urn power switch “OFF” before conducting any maintenance procedures.
q Chain and Rear Wheel Replacement Tools required: Phillips screwdriver, 10mm open wrench, two (2) 8mm open wrenches, and two (2) 13mm open wrenches. 1 With a Phillips screwdriver , loosen the two screws on the chain guard and remove the chain guard. 2 Using two 13mm open wrenches, loosen the locknuts by turning the wrenches counter clockwise.
8 Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www .razor .com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific T ime. q Battery Care and Disposal Do not store the battery in temperatures above 75° F (23.
9 TROUBLESHOOTING GUIDE Scooter does not run Scooter suddenly stopped working while in use Short run time (less than 15 minutes per charge) Scooter runs sluggishly Problem Possible Cause Solution Scooter must be traveling 3mph before motor will engage.
10 TROUBLESHOOTING GUIDE Sometimes the scooter doesn’t run, but other times it does Scooter makes loud noises or grinding sounds Problem Possible Cause Solution Loose wires or connectors Motor or electrical switch damage Chain is too dry Check all wires around the motor and all connectors to make sure they are tight.
Keep your scooter running for years with genuine Razor parts. Visit our website for more information on spare part availability . (Specifications subject to change without notice.
12 SB 1918 (CALIFORNIA) DECLARA TION YOUR INSURANCE POLICIES MA Y NOT PROVIDE COVERAGE FOR ACCIDENTS INVOL VING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT . TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONT ACT YOUR INSURANCE COMP ANY OR AGENT .
Razor Limited Warranty The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase. This Limited Warranty does not cover normal wear and tear , tires, tubes or cables, or any damage, failure or loss caused by improper assembly , maintenance, or storage or use of the Razor eSpark™.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Razor 13111290 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Razor 13111290 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Razor 13111290 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Razor 13111290 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Razor 13111290, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Razor 13111290.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Razor 13111290. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Razor 13111290 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
