Manuale d’uso / di manutenzione del prodotto Combined Pathfinder Radar del fabbricante Raymarine
Vai alla pagina of 248
Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.
Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.
hsb 2 PLUS Series Color LCD Display Owner’ s Handbook Docume nt number: 81 188_2 Date:14th D ecember 2 001.
.
iii hsb 2 Series Color LCD Display Owner’ s Handbook December 2001 INTEN DED USE The displ ay units det ailed in th is handboo k may form part of navigati onal radar syste ms int ended for lig ht ma rine use . The se dis plays a nd ra dar systems ar e only an aid to navig ation.
iv hsb 2 PLUS S eries Col or LCD Disp lay Raymarine pr oducts are supported by a networ k of Author ized Servi ce Representa tives. For informat ion on our products and ser vices, contact either of the following: UNITED ST A TES Raymarine Inc.
v Pr eface This handbook cover s the radar and chart as pects of the fo llowing hsb 2 (PLUS) seri es displa y systems f rom Raymarine: This handbook also describes the use of mult i-display sys tems. Note: Radar systems ar e supplied with an ap propriate Ra ymarine scanne r unit and inter -connecting cabl e.
vi hsb 2 PLUS S eries Col or LCD Disp lay W arr an ty T o register your hsb 2 series display unit ownership, ple ase take a few minutes to fill out the warr anty regi stration car d found at the end of th is handbook.
vii Contents Preface .............. .......................... ........................... .................. ......................... v W arranty ......................................................................................... vi EMC Conformance .
viii hsb 2 PLUS S eries Col or LCD Disp lay 2.4 Radar Display Control Function s ............................................... 2.16 Using the Zoom Fun ction ........................................................... 2.16 Offs etting the Cente r ...
ix Chapter 4: Integrated Radar Operations ........................ ........................... .....4.1 4.1 Introduction .................................... .............................................. 4.1 4.2 Changing th e Heading Mode ...........
x hsb 2 PLUS S eries Col or LCD Disp lay Going T o an Individual T arget Point ........................................... 5.33 Stop Follow or Stop Goto ..................................................... ....... 5.34 5.6 T ransferrin g W aypoints and Routes .
xi Units ................................................ .............................................. 7.7 V ariatio n Source ........................................................................... 7.8 Bridge NMEA Heading .......................
xii hsb 2 PLUS S eries Col or LCD Disp lay 8.2 Unpacking an d Inspecting t he Components ................................. 8.4 8.3 Selecting the Display Unit Location ............................................. 8.5 8.4 Cable Runs ...................
xiii Appendix A: Spec ification ................ ........................... .................. ...................... A.1 hsb 2 Series 7"and 10.4" LCD Color Displays ...............................A.1 Appendix B: Using t he Auxiliary Junction Box .
xiv hsb 2 PLUS S eries Col or LCD Disp lay.
Chapter 1: Overvi ew 1-1 How to Use T his Handbook How to Use T his Handbook Chapter 1: Overview How to Use This Handbook This handbook d escribes th e following hsb 2 (PLUS) se ries displ ays and mul.
1-2 hsb 2 PLUS S eries Col or LCD Disp lay How to Use T his Handbook How to Use Th is Handbook Chapters 3 provi des detai led operat ing infor mation for the main r adar functions - adjust ing the radar picture; measuring di stances an d bearings; setting gua rd zones and alarms, using MARP A for tar get tracki ng.
Chapter 1: Overvi ew 1-3 How to Use T his Handbook How to Use T his Handbook T erminology The foll owing terminol ogy is us ed to describe r adar and c hartplott er systems: Master A unit capa ble of sourcing speci fic data such as fishfinder , cha rt or r adar data.
1-4 hsb 2 PLUS S eries Col or LCD Disp lay General General 1.1 General The hsb 2 (PLUS) seri es Pathfinder Radar or Pathfinder Radar/Char tplotter comprises the 7"or 10.4"Color LCD PLUS di splay unit , scanner unit an d associat ed cables. The RC530 PLUS and RC631 PLUS Chartplotters cannot be connected to the scanner unit.
Chapter 1: Overvi ew 1-5 PLUS Display Units PLUS Display Units master displ ay) via the hsb 2 connect ion and can be displ ayed and contr olled on any other hsb 2 serie s LCD or CR T disp lay (the repeat er display).
1-6 hsb 2 PLUS S eries Col or LCD Disp lay Operating Modes Operating Modes • V iew radar and chart simul taneously as radar/ chart overlay or in half- screen wi ndows. • Half-s creen windows to displ ay additional dat a: Course Deviation Indi ca- tor (CDI), Bearin g and Distance Indicat or (BDI), navigati on data.
Chapter 1: Overvi ew 1-7 Operating Modes Operating Modes F i gure 1-2: Full Screen Oper ating Modes HEAD UP I R 3nm RR CURSOR HDG MODE TARGETS SCREEN BRG RNG nm 000° 0.
1-8 hsb 2 PLUS S eries Col or LCD Disp lay Operating Modes Operating Modes Half-Screen W indow Opti ons • Chart displ ay , Radar display: If data is availabl e as a f unction of the combined dis play unit it can be disp layed full scre en, as shown in Figur e 1-2 , or in a half- screen windo w .
Chapter 1: Overvi ew 1-9 Heading and P o sitio n Data Heading and P o sitio n Data Heading a nd Po sition Data Full funct ionali ty of th e radar /cha rtplott er is ac hiev ed whe n it is par t of an integrat ed system with other equi pment (in additio n to another hsb 2 unit) connected via SeaT alk or NMEA 0183.
1-10 hsb 2 PLUS S eries Col or LCD Disp lay T he P athfinder Radar PLUS Display T he P athfinder Radar PLUS Display 1.2 The Pathfinder Radar PLUS Display When a scanner is connected and the radar is in T ransmit mode, the radar picture provide s a map-li ke represe ntation of the are a in wh ich the r adar is operatin g.
Chapter 1: Overvi ew 1-11 P a thfind er Radar PLUS Display Options P a thfind er Radar PLUS Display Options CURSOR HDG MODE TARGETS SCREEN BRG RNG nm 045 ° 0.28 R Landmass Surface vessel Default soft key labels These can be turned off; press any soft key to re-display them.
1-12 hsb 2 PLUS S eries Col or LCD Disp lay Radar F unctions Radar Functio ns Radar Function s The hsb 2 (PLUS) series Pathf inder Radar incl udes the following functions: • Choice of ra nge scales from 1 / 8 nm to 72nm (d ependent on scanner ty pe).
Chapter 1: Overvi ew 1-13 T he Chartplotter Display T he Chartplotter Display 1.3 The Chartpl otter Display The hsb 2 (PLUS) series LCD Display can i nclude a Chartp lotter . The chartplo tter inc ludes a small-sca le world map and detailed navigat ion informa tion is displayed when a cart ographic ch art c ard is i nstalled.
1-14 hsb 2 PLUS S eries Col or LCD Disp lay Chartplotter Display Options Chartplotte r Display Options Chartplotte r Display Options In addition to the display se t up options previous ly described, c.
Chapter 1: Overvi ew 1-15 Cha rtplo tter Functi ons Cha rtplo tter Functi ons ON : Chart text, c hart boundar ies, depth contours, navigation marks and land feature s. OFF : Caution and routi ng data. CUST OM : Spot soundin g, light s ectors, marine fe atures.
1-16 hsb 2 PLUS S eries Col or LCD Disp lay Oper atin g Con tro ls Operating Con trols 1.4 Operat ing Contr ols Y ou operat e the radar and chart systems using a variet y of controls: • A trackpad providing up, down, left, rig ht and diagonal contr ol of an on- scr een cur sor .
Chapter 1: Overvi ew 1-17 T rackpad and Cursor T rackpad and Cursor The cursor is used to: • Select a posit ion on the screen. • Select an item, e.g.guard z one on th e radar , chart object on the chartpl otter . • Select an area of the radar image to zoom into or pan the cha rt display .
1-18 hsb 2 PLUS S eries Col or LCD Disp lay Dedicated K eys Dedicated Keys Some items on the radar/ chartplott er screen, such as the cursor have informati on associated wit h them. Most information is dis played in a data box. The context-s ensitive cursor al lows you to move databoxes.
Chapter 1: Overvi ew 1-19 Po p - U p M e n u s Po p - U p M e n u s until y ou press a key , or select an item on the scre en; the s oft keys a ssociated with the actio n are then displayed . The current ly selecte d soft key opti on is shown by its green backgrou nd.
1-20 hsb 2 PLUS S eries Col or LCD Disp lay Database Lists Database Lists Database Li sts The waypoi nts, routes a nd tracks tha t you create on the cha rtplotter are stored in datab ase li sts. Y ou c an view the se lists and se lect it ems for edi ting.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-1 Introduction Introduction Chapter 2: Getting Started & Adjusting the Display 2.1 Intr oduction This chapter provi des information and instructions to get you star ted using the hsb 2 se ries LCD display .
2-2 hsb 2 PLUS S eries Col or LCD Disp lay Switching the Disp lay On and Off 2.2 Switching the Di splay On an d Off If you have a combined Radar/Chart plotter , the factory defa ult power -up mode is r adar . Once you ha ve used the display u nit it powers-up in the last used mode.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-3 Swi tching t he Displa y On and Off Switching the Displa y On and Off After 70 seconds, when the magn etron warm-up sequence is c omplete, the S tandby screen is displ ayed, with the text ST ANDBY and a prompt to press the POWE R key to ente r T ransmit mode.
2-4 hsb 2 PLUS S eries Col or LCD Disp lay Switching the Disp lay On and Off Chart Mode ➤ T o switc h the display on, press and hol d the POWER key until the uni t beeps.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-5 Simulator M ode Simulator Mode F igure 2-4: Switch Off When the counter reac hes zero a beep sounds, and the dis play unit switche s off . Relea se the PO WER key . Note: Switch the display unit off bef ore you remove the power cord.
2-6 hsb 2 PLUS S eries Col or LCD Disp lay Changing the Brightness Changing th e Bright ness The MUL TI key on the color LCD displa y is used to adjust brightnes s. The brightnes s of the scree n can be a djusted ove r a wide r ange, suit able for viewing in dayli ght (high bright ness level) or at ni ght (low brightnes s level).
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-7 Controlling the Display Con troll ing t he Display 2.3 Contro lling the Display Y ou contro l the display using the cursor and control keys.
2-8 hsb 2 PLUS S eries Col or LCD Disp lay Sel ecti ng t he M ode o f Operation ➤ T o change the mode, pr ess the DISPLA Y key to show the DISPL A Y pop-up, then press again to cycle through the modes available, shown in th e Figur e 2-5 .
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-9 Selecting the Mode of Op eration Selecting the Mode of Operation Radar: Chart: 2. T o select a dif fere nt window , press eit her SELECT WINDOWS soft key until the requir ed window is highl ighted.
2-10 hsb 2 PLUS S eries Col or LCD Disp lay Sel ecti ng t he M ode o f Operation F igure 2-6: R adar Half-Screen Window Options CDI Window SELECT WINDOW WINDOWS OFF ON ZOOM OFF ON SELECT WINDOW WINDOW.
Chapter 2: Gett ing Started 2-11 MULTI Controls guard zone alarm sensitivity, and tuning the receiver. Also controls display lighting and brightness. - Press to display sliders. Select a slider using the soft key or trackpad. Toggle between Auto/Man or off/on by pressing key again.
2-12 HSB Se ries Color LCD Di splay D5570-1 Soft Key Labels: Change when you press a key. Default soft key labels are shown. Chartplotter ROUTE GOTO SCREEN FIND SHIP Trackpad Controls cursor position and the slider values. Hold the trackpad down to move the cursor faster.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-13 Customizing t he Screen Pr esentation Options Customizing the Screen Presentation Options Customizing the Scr een Pr esen tation Options .
2-14 hsb 2 PLUS S eries Col or LCD Disp lay Customizin g the Screen Presentation Options Data Boxes A group of up t o six data bo xes can be dis played, if t he informa tion is avai lable on your system. Y ou select which dat a is dis played in t he boxes during system set up as describe d in Chapter 7:Setting Up the Syst em Defaults .
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-15 Customizing t he Screen Pr esentation Options Customizing the Screen Presentation Options ➤ T o display the ac tive waypoin t: 1. Press the SCREEN soft key . 2. Press the WA YPOINT soft key to toggle the setti ng ON .
2-16 hsb 2 PLUS S eries Col or LCD Disp lay Rada r Dis play Co ntro l Functio ns 2.4 R adar Display Contr ol Functions This sectio n describes how to use the radar control s to: • Use the zoom funct ion to enlarge a selected area. • Offse t the cent er of the radar disp lay .
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-17 Offsetting the Center Offsetting the Center 3. Press the requi red zoom option soft key , INT O WIN or FRO M WIN . The soft keys are cle ared, and the cursor has control of the zoom box th at indicate s the area to be enlar ged.
2-18 hsb 2 PLUS S eries Col or LCD Disp lay Hiding the Ship ’ s Heading Ma rk er (SHM) Note: You cannot offset t he center when the rad ar display is se t to the long est range scale. ➤ T o change the c enter: 1. Move the curso r over the center of the r adar picture, unt il the lett ers CTR are displayed.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-19 Chart Display Control Funct ions Chart Display Contro l Functio ns 2.5 Chart Display Contr ol Func tions Moving Ar ound the Chart Y ou will normally oper ate the chartp lotter with the chart showing your vessel’ s cu rrent loc ation.
2-20 hsb 2 PLUS S eries Col or LCD Disp lay Moving Ar ound the Chart F igure 2-10: Chang ing the Chart Center 3. Use the trackpad to move the cursor to the requir ed position. 4. Press ENTER to se lect the position and r eturn to normal cu rsor contr ol.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-21 Moving Around the Chart Moving Ar ound the Chart the radar and char t images. It is recommended that you set the radar to T rue motion to ensure th e radar a nd chart images remain synchron ised when t he vessel move s.
2-22 hsb 2 PLUS S eries Col or LCD Disp lay Moving Ar ound the Chart ➤ T o change the scale q uickly , press and hold t he required a rrow on the RA NGE key . The dista nce in dicator at the le ft-hand en d of the status bar is updat ed whenever you change the chart scale.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-23 Radar/Chart Overlay Radar/Chart Overlay • If Plott er Mode is Off, the ch art scal e remains u nchanged, indi cating the s mallest ch art scale is disp layed.
2-24 hsb 2 PLUS S eries Col or LCD Disp lay Radar/Chart Overla y When Radar/Chart over lay is switched on the soft key MORE... provides access t o the SCREEN s oft key an d to the radar controls T ARGETS and MARP A . The ra dar GAIN control is also activ e in overl ay mode.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-25 Ty p i c a l C h a r t Scenarios T ypical Chart Scenarios 2.6 T ypical Chart Scenarios The followi ng illustr ations provide operating gu idelines f or typical navigation scenarios .
2-26 hsb 2 PLUS S eries Col or LCD Disp lay Place an d Goto a W aypoint Place and G oto a W aypoint 1. Press MARKS 2. Position Cursor as required Press the soft key 1 2 3 Press the soft key to go to the waypoint selected by the cursor.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-27 Place and Goto a Wa y p o i n t Place and Goto a W ay poi nt 4 The vessel navigates towards the target waypoint See: 5.
2-28 hsb 2 PLUS S eries Col or LCD Disp lay Mak e an d F ollo w a Route Make a nd Follow a Route # GOTO SCREEN ROUTE FIND SHIP MAKE ROUTE EDIT ROUTE CLEAR ROUTE MORE¬ 2 2.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-29 Mak e and F ollow a Route Mak e and F ollo w a Route GOTO WAYPOINT FOLLOW ROUTE GOTO CURSOR GOTO CURSOR RESTART XTE WAYPOINT ADVANCE STOP FOLLOW GOTO SCREEN ROUTE FIND SHIP 7 5 6 8 Press the soft key D4268-2a Press the soft key Press the soft key.
2-30 hsb 2 PLUS S eries Col or LCD Disp lay Review Y our P assage Plan Review Y our P assage Plan GOTO SCREEN ROUTE FIND SHIP MAKE ROUTE EDIT ROUTE CLEAR ROUTE MORE¬ 2 3 2. Press the soft key 1 4 5 Press the soft key Press the soft key D4269-1 Press the soft key 1.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-31 Review Y our P assage Pla n Review Y o ur P assage Plan 6 Change the TIME to HOURS - the display indicates it will take 32 minutes to reach the destination. You can change the PLANNED SOG; the display updates to indicate TIME required at the planned speed.
2-32 hsb 2 PLUS S eries Col or LCD Disp lay Displaying the Radar and Sync hron izin g Radar & Chart Displayi ng the Rada r and Syn chr onizing Radar & Chart 1 2 D4293-1 2 . Press the soft keys to set windows ON. The Chart window is the default selection.
Chapter 2: Getting Sta rted & Adjust ing the Di splay 2-33 Display ing the Rada r and Synchroniz ing Radar & Chart Displaying the Radar and Sy nchron izin g Rada r & Char t FIND SHIP MORE¬ SCREEN RDR CHRT GOTO MORE¬ ROUTE RDR CHRT 6 5 7 Press the soft key to synchronise the chart & radar images.
2-34 hsb 2 PLUS S eries Col or LCD Disp lay Displaying the Radar and Sync hron izin g Radar & Chart.
Chapter 3: Stan dard Radar Operati ons 3-1 Introduc tion Chapter 3: Standard Radar Oper ations 3.1 Intr oduction This chapt er provides d etailed i nstructions for the st andard radar operations of your hsb 2 series Pat hfinder Radar .
3-2 hsb 2 PLUS S eries Col or LCD Disp lay Range Cont rol 3.2 Range Control The radar pictu re can be viewed at various scales. The shortest range scale gives a maximum range of 1 / 8 na utical mi les, measure d from the default centre to the t op of the radar pict ure.
Chapter 3: Stan dard Radar Operati ons 3-3 Determining Actual Rada r Ra nge . * The maxim um range depen ds on your scann er type, as detailed in the Pathfinder Plus Radar Scanner Owner’ s Handboo k . The number o f range r ings shown i n the ta ble is the number to the s elected range.
3-4 hsb 2 PLUS S eries Col or LCD Disp lay Interpreting and Adju sting the Ra dar Picture Note: The ranges s hown in the tab le are theor etical maxi mum ranges. The ra- dar horizo n is greater th an the opti cal horiz on, but the radar can only de tect targets if a lar ge enough target i s above t he radar hor izon.
Chapter 3: Stan dard Radar Operati ons 3-5 Identifying Fal se Echo Retur ns . t Identi fying F alse Ech o Returns Not all echoes are direct return s to the radar antenna . Occasionally sig nals appear a t posi tions where there i s no ac tual tar get.
3-6 hsb 2 PLUS S eries Col or LCD Disp lay Identifying F alse Echo Returns Indirect Ec hoes There are several t ypes of indi rect echoes or gho st images - some examples a re shown in Fi gur e 3-4 . These somet imes have the appearance of tr ue echoes, but in general t hey are i ntermitt ent and p oorly defi ned.
Chapter 3: Stan dard Radar Operati ons 3-7 Adjusting Gain, Sea Clutter , Rain Clutter and T une Adjus ting Gain, S ea Clutter , Rain Clu tter and T une Automatic adjus tment of Gain, Sea and T une is avail able, altern atively you can set any of t hese paramet ers to manua l and use the t rackpad to adjust i ts value.
3-8 hsb 2 PLUS S eries Col or LCD Disp lay Adju stin g Gai n, Se a Clutter , Rain Clu tter and T une 4. Use the trackpa d to move the slider up or down.
Chapter 3: Stan dard Radar Operati ons 3-9 Adjusting Gain, Sea Clutter , Rain Clutter and T une and the echoes are not repeti tive or consis tent in pos ition. W ith hi gh winds and extreme condition s, echoes from sea clutt er may cause dense background clutter in the shape of a n almost s olid disc.
3-10 hsb 2 PLUS S eries Col or LCD Disp lay Adju stin g Gai n, Se a Clutter , Rain Clu tter and T une as lar ge haz y areas, d epending on the in tensity of the rai nfall or snow in t he storm cel l. The RAIN and FTC controls are used to red uce this clu tter , so that target s masked by the clu tter can be seen on the radar pict ure.
Chapter 3: Stan dard Radar Operatio ns 3-11 Changing the T argets Display Changing the T arget s Displa y The Pathfi nder Plus Rada r allows you to improve t arget visibil ity by chang ing the f ollow ing: • Interfe rence r ejection • T ar get expansi on • T ar get wakes These parame ters are acces sed from the default soft key TA R G E T S .
3-12 hsb 2 PLUS S eries Col or LCD Disp lay Changing the T argets Display Interf erence Re jectio n Mutual rad ar interfer ence is likely when two or more rad ar- equipped vessels are operati ng within rang e of each other .
Chapter 3: Stan dard Radar Operatio ns 3-13 Measuring R ange and Bearing U sing VRM/ EBLs 3.4 Measuring Range and Bear ing Using VRM/EBLs The Pathfi nder Plus Radar displ ay allows you to spec ify up to two El ectronic Bearing Li nes (EBLs), e ach with a n associat ed V ariable Range Marker (VRM), using the VRM/EB L key .
3-14 hsb 2 PLUS S eries Col or LCD Disp lay Measurin g Range and Bearing to T arget from V essel • Measure the bearing of a tar get or point fro m your vessel’ s position, using an EBL • Measure.
Chapter 3: Stan dard Radar Operatio ns 3-15 Measuring R ange and Beari ng to T a rget from V essel F igure 3-12: Placing a VRM 2. If requi red, use the trackp ad control s to change the radi us (range ) of the VRM circle and the angle of the EBL until they cross the requ ired tar get.
3-16 hsb 2 PLUS S eries Col or LCD Disp lay Measurin g Range and Bear ing B etwee n Ta r g e t s ( F L O A T ) ➤ T o move the VRM and/or EBL: 1. Move the cursor over the VRM or EBL you wish t o change. If you wish to change the VRM and EBL together , move the cursor over the inter section of VRM /EBL .
Chapter 3: Stan dard Radar Operatio ns 3-17 Measuring R ange and Beari ng Between Ta r g e t s ( F L O A T ) or unfloat ing a VRM/EBL pair , as desc ribed below; however, as it i s more dif- ficult to locat e the VRM/ EBL origin when it is over the centre, y ou will pr oba- bly fi nd it easi er to us e the keys in t his case.
3-18 hsb 2 PLUS S eries Col or LCD Disp lay Controlli ng VRM/EBL Data Boxes 3. Alternati vely , if you wish to move the floatin g VRM/EBL, press ENTE R to take control of it and move it using the trackpad.
Chapter 3: Stan dard Radar Operatio ns 3-19 Sett ing G uard Zones and Alarms 3.5 Setting Guard Zones and Alarms The Pathfi nder Plus Radar displ ay allows you to set up one or two guard zones, using the ALARMS key . Y ou can set up sector z ones or 360 ° (circular ) zones as sho wn in Figur e 3-13 .
3-20 hsb 2 PLUS S eries Col or LCD Disp lay Placi ng a Guard Zone Plac ing a G uard Zone Placing a nd positi oning guard zones on t he Pathfind er Plus Rada r dis play is quick and easy . • If a gu ard zone is not already di splayed, you can place one using the ALARMS key .
Chapter 3: Stan dard Radar Operatio ns 3-21 Moving, Reshapin g or Deleting a Guard Zone 3. If neces sary , use the tr ackpad to move the corner of the guard zone t o the required position. As you move th e corner , the widt h and/or he ight of the zone c hanges, but its gener al sector shape is reta ined.
3-22 hsb 2 PLUS S eries Col or LCD Disp lay Controlling Guard Zone Alarms Contro lling Gu ard Zone Alarms The guard ala rm is trigge red when a tar get ent ers a guard zo ne which exceeds the tar get densit y threshold. Y ou can set the threshold above wh ich a new tar get will trig ger an alarm, and can also turn the alarm on or off.
Chapter 3: Stan dard Radar Operatio ns 3-23 MAR P A 3.6 MARP A Introduction to MARP A The hsb 2 ser ies displ ays inclu de a MARP A (Mini Automatic Rada r Plottin g Aid) functio n for tar get track ing and risk analysi s.
3-24 hsb 2 PLUS S eries Col or LCD Disp lay Intr odu ctio n to MARP A • Choppy sea state condi tions exist yi elding poor stabi lity; own ship’ s heading data is very unstable .
Chapter 3: Stan dard Radar Operatio ns 3-25 Using MARP A T arget V e ctor and History The MARP A targets can be dis played with a vector li ne showing where they will be at a certa in time in the future, (a ssuming present cour se and speed). Y ou can selec t a relative or true vect or and the vecto r length.
3-26 hsb 2 PLUS S eries Col or LCD Disp lay Using MARP A Acqu ire a T arget ➤ T o acqui re a targe t: 1. Press the MARP A sof t key to display t he ACQUIRE T ARGET soft keys. 2. Position the cu rsor over the requi red tar get an d press t he ACQ U IRE T AR GE T soft key .
Chapter 3: Stan dard Radar Operatio ns 3-27 Using MARP A tar get using the context sensit ive cursor or the dat abase list. Alte rnatively , if you display the dat a box when no target is selected, da.
3-28 hsb 2 PLUS S eries Col or LCD Disp lay Using MARP A F igure 3-16: MARP A Database List ➤ T o cancel all tar gets: 1. Press MA RP A followed by MA RP A LIST to display the dat abase list. 2. Press the CANCEL ALL soft key . Y ou are prompt ed to confirm.
Chapter 4: Integra ted Radar Operations 4-1 Introduction Chapter 4: Integr ated Radar Oper ations 4.1 Intr oduction This chapt er explai ns how to use and dis play non-r adar infor mation that may be avail able from ot her units connected t o your syst em.
4-2 hsb 2 PLUS S eries Col or LCD Disp lay Changing the Head ing M ode 4.2 Changing t he Heading Mode The radar picture is normall y shown with your vessel ’ s dead ahead be aring straight up, as indicated b y the Ship’ s Heading Mar ker at 0° relati ve bearing.
Chapter 4: Integra ted Radar Operations 4-3 Tr u e a n d R e l a t i v e Motion The refe rence used for the Course Up depends on t he informat ion avail able. The firs t availa ble in the fol lowing list is used : 1. A locked he ading (i.e . the headi ng being us ed by an a utopilot) over a SeaT alk connection 2.
4-4 hsb 2 PLUS S eries Col or LCD Disp lay Using Marks 4.3 Using Marks The Marks functi on allows you to pla ce a mark anywhere on the r adar picture .
Chapter 4: Integra ted Radar Operations 4-5 Man Overboard (MOB ) Moving or Deleting a Mark Y ou can move or delete marks usi ng the context-se nsitive curs or . ➤ If you have placed a mark and wish to move it later: 1. Move the cursor ov er the m ark until the le tters M RK are displayed.
4-6 hsb 2 PLUS S eries Col or LCD Disp lay Cursor Echo F igure 4-2: MOB Alarm ➤ T o cancel the MOB, press and hold the MARK key for 2 seconds. Note: The MOB procedure ca n also be initiate d or ca ncelled re motely if the appropriat e SeaTalk mes sage is r eceived by the Pathf inder Radar.
Chapter 5: Stan dard Chart Operat ions 5-1 Introduction Chapter 5: Standar d Chart Oper ations 5.1 Intr oduction This chapter explains how to use t he chart functi ons to navigate with your hsb 2 series dis play . It cover s the followi ng topics: • Using c hart car ds.
5-2 hsb 2 PLUS S eries Col or LCD Disp lay Using Chart Car ds 5.2 Using Chart Card s The chartplot ter has a built- in world map; most areas are displa yed on a scale of 4000 nm from the top to t he bottom of the scr een, and can be zoomed in to 150 nm.
Chapter 5: Stan dard Chart Operat ions 5-3 Removing a Chart Card F igure 5-1: R emoving the Char t Card Remo ving a C hart Card W e recommend that before you r emove a chart car tridge, you ens ure the chart is not being used on any othe r display unit.
5-4 hsb 2 PLUS S eries Col or LCD Disp lay Displaying Obj ect Inform ation The boundary of e ach chart digi tized in the c urrent card i s defined by a box or rectangl e. (Y ou can switc h off the chart boundarie s display if you wish , as part of the chartplott er set up descr ibed in Sect ion 7.
Chapter 5: Stan dard Chart Operat ions 5-5 Displaying Object Infor mation ➤ T o obtain chart source dat a, move the curso r so that is not ov er a symbol, then press EN TER . An object infor mation pop-up is displayed, providi ng source information fo r the select ed land or depth area.
5-6 hsb 2 PLUS S eries Col or LCD Disp lay Displaying Obj ect Inform ation Tide Data The s ymbol indica tes tide height data is avail able for that posi tion on the chart.
Chapter 5: Stan dard Chart Operat ions 5-7 Displaying Object Infor mation select the characte r and up/down to incre ase/decrea se the value. The graph and tide dat a will be updated accord ingly . Nearest ➤ T o obtai n the informat ion for the neares t port facili ty: 1.
5-8 hsb 2 PLUS S eries Col or LCD Disp lay Wor ki ng w ith W ay poi nts 5.3 Wo rking with W ayp oints Intr oduction The hsb 2 serie s Chartplotter enabl es you to place up to 998 waypoi nts (in addition, waypoi nt number 999 is used for MOB operation): a waypoi nt is a position ent ered on a chart as a refe rence, or as a place to go to.
Chapter 5: Stan dard Chart Operat ions 5-9 Plac in g a W ay poin t • Moving a W aypoint At the e nd is a section about usi ng the ST60/ 80 Navigator Keypad to s elect, edit, and name your waypoints. Placing a Wa ypoint The scenar io Plac e and Goto a W aypoin t on page 2-26 provides a simple example of how to place a waypoin t.
5-10 hsb 2 PLUS S eries Col or LCD Disp lay Plac ing a W ayp oint 3. Y ou can use the s oft keys t o edit t he waypoin t positio n as descr ibed in Edi t- ing the W aypoint Deta ils on page 5-13 . It is a dded to the W aypoint List and na med with t he next avai lable number .
Chapter 5: Stan dard Chart Operatio ns 5-11 Plac in g a W ay poin t 3. Edit the Loran para meters as require d, using: i. The CH AIN soft key , which enable s selection of both the Chain and it’ s Slave: ii. The ASF1 /ASF2 soft key , which prese nts two soft keys for editing ASF 1 and ASF 2 par amete rs independently : iii.
5-12 hsb 2 PLUS S eries Col or LCD Disp lay Selecting a W aypoint Selecti ng a W aypoint Positioni ng the cur sor over a waypoint selects t hat waypoint and acces ses the waypoint sof t keys. These keys en able you to GO T O (descr ibed in Secti on 5.
Chapter 5: Stan dard Chart Operatio ns 5-13 Editing the W aypoint Details While the cursor is over the waypoint, the waypoi nt soft keys are displaye d. ➤ T o remove the waypoint data box and soft keys eithe r: Move the cu rsor away f rom the waypoi nt, or pr ess CLEAR .
5-14 hsb 2 PLUS S eries Col or LCD Disp lay Erasing a W aypoint 5. T o edit the way point posit ion, press the EDIT WA YPOINT soft key , foll owed by POSITION . The W aypoint Position pop-u p is displayed. Use the soft keys to sel ect LA T , LON, BRG or RNG .
Chapter 5: Stan dard Chart Operatio ns 5-15 Using the ST 60 or ST80 Navigator Ke y p a d CAUTION: T ake car e when editing waypoi nts as it is possible to move waypoints th at are used in r outes stor ed in t he Route Databas e. In such i nstances, t he stor ed route will include the waypoint in its new positi on.
5-16 hsb 2 PLUS S eries Col or LCD Disp lay Using the ST60 or ST80 Navigator Ke y p a d Most of the alphanumer ic keys are used to input mult iple charact ers. Each time you press one of these keys in su ccessio n, the next charac ter on that key is input.
Chapter 5: Stan dard Chart Operatio ns 5-17 Using the ST 60 or ST80 Navigator Ke y p a d Editin g Entri es in the Waypoint, Route, or T rack List s Y ou ca n also use the Naviga tor Keypad t o edit a n existin g item or to name a new item in the W aypoint List, Route List, or T rack List.
5-18 hsb 2 PLUS S eries Col or LCD Disp lay Working with R outes 5.4 Working with Routes A route is made up of a series of waypoint s (maximum 50). T o make a route you place a seri es of waypoints on the chart, or you can selec t waypoints from the W aypoint Li st.
Chapter 5: Stan dard Chart Operatio ns 5-19 Creating a New Rou te • Retri eving a ro ute from t he database list a s the current route. • Displa ying route informatio n, including the rout e leg dat a and waypoin t details. Use the waypoi nt details to revi ew your passage plans for dif fere nt speeds.
5-20 hsb 2 PLUS S eries Col or LCD Disp lay Creating a New Ro ute Note: You can position the cursor on an existi ng waypoint – the cursor tex t WPT indicates you are re-usi ng the wayp oint ra ther than plac ing a new one. This waypoint is included in the route when you press PLACE WAYPOINT .
Chapter 5: Stan dard Chart Operatio ns 5-21 Creating a New Rou te 3. Press the U SE WPT LIST soft key; the MA KE ROUT E sc reen is d isplayed with its ass ociated s oft key s.
5-22 hsb 2 PLUS S eries Col or LCD Disp lay Saving the Current Route Saving the Curr ent Route Y ou can sa ve up to 20 named rout es in the ro ute database list. The se routes can then be re-di splayed and fol lowed at a later date. When you sa ve the route, all new waypoints are sav ed in the W aypoint List.
Chapter 5: Stan dard Chart Operatio ns 5-23 Clearing the Current Route Y ou ca n use a Navi gator Keypad (see Usin g the ST60 or ST80 Navigator Keypad on page 5-15 ) to nam e the route. 5. Press EN TER to finish and cle ar the Name List, or press CLE AR to cancel the opera tion.
5-24 hsb 2 PLUS S eries Col or LCD Disp lay Displaying Rou te Inform ation F igure 5-7: R oute List Window Displayi ng Route Informat ion Y ou can displ ay the following inf ormation that rel ates to your route : • Route leg or waypoint infor mation, using the conte xt-sensit ive cursor .
Chapter 5: Stan dard Chart Operatio ns 5-25 Displaying Ro ute Infor mation Using Rout e Informat ion to Revi ew Y our Passage Plan Y ou can view data fo r all the waypoints in the cur rent route , or any save d route.
5-26 hsb 2 PLUS S eries Col or LCD Disp lay Using the Rou te List to Erase and Name a Route F igure 5-8: R oute Informati on Window 4. Press EN TER to remove the Rout e Information window , then ENTE R or CLEAR to return to the r oute soft keys. 5. T o return to the default soft key dis play , press ENTER .
Chapter 5: Stan dard Chart Operatio ns 5-27 Editin g a Route 3. If you NA ME a route, use the trackpad to move the cur sor right or left to the character you wish to edit. Then use the t op or bott om of the trackpad to increase or decrea se the letter or number .
5-28 hsb 2 PLUS S eries Col or LCD Disp lay Editing a Ro ute Adding W ayp oints at the End of the Route ➤ T o add waypoints at the e nd of the route: 1. Press the ROUTE soft ke y , followed by the EDIT RO UTE soft k ey . The Make Route sof t keys are displayed and the cursor is conn ected to the last-pl aced waypoint with a do tted lin e.
Chapter 5: Stan dard Chart Operatio ns 5-29 Editin g a Route Reversi ng the Route ➤ T o reverse the r oute, s o you can Fol low the r oute back: 1. Either pr ess the ROUTE soft key fol lowed by MORE , or move th e curso r over th e require d waypoint un til the letters RT E are dis- played.
5-30 hsb 2 PLUS S eries Col or LCD Disp lay F ollowing R outes and Going to P oints 5.5 F ollowin g Routes and Going to P oints The default so ft key GO T O accesses the f unctions to FOLLOW a route and GO TO a waypoint or cursor .
Chapter 5: Stan dard Chart Operatio ns 5-31 F ollow a Ro ute You should a lways check the target waypoint be fore init iating a f ollow rout e. ➤ T o fol low the curren t rout e: 1. Press the GOT O default soft key . The Goto /Follow soft keys are displayed .
5-32 hsb 2 PLUS S eries Col or LCD Disp lay T ar get Poin t Ar rival T arget P oint Arri val The arriv al ala rm is used t o alert you when the vess el is appr oaching the targ et point. The ar rival ala rm is define d as a circl e (not visi ble on the sc reen) around the tar get.
Chapter 5: Stan dard Chart Operatio ns 5-33 Going T o an Individua l T arge t Po i n t Adva ncing to a Waypoint ➤ Once you are fol lowing a route, yo u can advance to th e next waypoi nt, even if you have n ot rea ched the c urrent t arget waypoint: 1.
5-34 hsb 2 PLUS S eries Col or LCD Disp lay Stop F ollow or Stop Goto 2. Press the GO T O WA YPOINT soft key . Navigation t o the select ed waypoint begin s. The soft key ST OP GO T O is dis- played. 3. T o return to the default soft key dis play , move the cursor away from the waypoint or press ENTER or CLEAR .
Chapter 5: Stan dard Chart Operatio ns 5-35 Tr a n s f e r r i n g W aypoints a nd Routes 5.6 T r ansferring W ayp oints and Routes Disp layed S eaT alk W ay point s In an i ntegrated system, when a r.
5-36 hsb 2 PLUS S eries Col or LCD Disp lay T ransferring W aypoints and Routes ➤ T o save waypoints t o, or load waypoints f rom a user cartridge : CAUTION: Loading wayp oints fr om a user cartridge overwrites any existi ng waypoint and ro ute lists.
Chapter 5: Stan dard Chart Operatio ns 5-37 Tr a n s f e r r i n g W aypoints a nd Routes ➤ T o receive incoming waypoi nts on Sea T alk or NMEA: 1. T o display t he waypoint lis t press MARKS followed by the WA YP OINT LIST soft key . Press the WA YPOINT TRANSFER soft key .
5-38 hsb 2 PLUS S eries Col or LCD Disp lay Using T racks ➤ T o rece ive the waypoint and ro ute lists via hsb 2 , you must set- up the t ransfer on both display units - one unit will send waypoi nts, the other wi ll receive th em. CAUTION: Receiving waypoint s from another hsb 2 instrument overwrites any existing waypoi nt and route lis ts.
Chapter 5: Stan dard Chart Operatio ns 5-39 Sett ing Up a T r ack • Managing tracks, us ing the t rack list, including Sa ving, Naming, Er asing and Showing a track. • Making a T rack int o a Rou te ➤ T o access the track cont rols: 1. From the chart dis play , press the MENU key to disp lay the cha rt set up soft keys.
5-40 hsb 2 PLUS S eries Col or LCD Disp lay Clearing the Current Tr a c k F igure 5-9: T ra ck Interval Setting Guide Y ou ca n change the setting at any t ime. The set ting appli es only t o the cur rent track and is not sav ed as a stored track. ➤ T o set up a tra ck: 1.
Chapter 5: Stan dard Chart Operatio ns 5-41 Managing T racks Press CL EAR to abort the Clear T rac k operatio n. The curre nt track is cleared fr om the screen and the def ault soft keys ar e displayed .
5-42 hsb 2 PLUS S eries Col or LCD Disp lay SmartR oute Namin g, Erasing and Sho wing a T rack ➤ T o name an exist ing track, erase a track or show a track, you select the track from the track li st, then press the app ropriate soft key as fol lows: 1.
Chapter 6: Fur ther Chart Operat ions 6-1 Introduction Chapter 6: Further Chart Oper ations 6.1 Intr oduction This chapter expl ains how to use the additional functions that are prov ided on the hsb 2 seri es chartp lotter a nd combined radar/ch artplotte r .
6-2 hsb 2 PLUS S eries Col or LCD Disp lay Measuring Di stances Using the VRM/EBL Ke y 6.2 Measuring Distances Using the VRM/EBL Ke y Y ou can o btain an acc urate measure ment of th e distance a nd bearing bet ween two points by us ing the VRM/EB L key .
Chapter 6: Fur ther Chart Operat ions 6-3 Measuring Dist ances Using the VRM/EBL Ke y ➤ T o re-position one end of the rul er line: 1. Move the cursor over the ruler line toward s the end that you want to re- position, until t he letter s A → B are displ ayed.
6-4 hsb 2 PLUS S eries Col or LCD Disp lay Alarms and T imers 6.3 Alarms and Timer s Alarm Reporting The chart plotter reports t he fol lowing alarms , that are set us ing the ALARMS key: Alar m Ind i.
Chapter 6: Fur ther Chart Operat ions 6-5 Setting Alarms and Ti m e r s Settin g Alarms and Timers ➤ T o set up an ala rm or timer: 1. Press the ALARMS key . The Alarms Set Up men u is disp layed, showing the cu rrent se ttings ( see Figur e 6-2 ). 2.
6-6 hsb 2 PLUS S eries Col or LCD Disp lay Man Overboard (MOB ) 6.4 Man Overboard (M OB) If you l ose a person or obje ct overboar d, and need t o return t o the locat ion, you should use the Man Overboard ( MOB) function. Y ou can selec t the type of data used for the MOB posit ion using the set up menus (see Section 7.
Chapter 6: Fur ther Chart Operat ions 6-7 Cursor Echo ➤ T o cancel the MOB, press and hold the MARKS key for 2 seconds. The chart i s re-drawn a t its previ ous scale, a nd the MOB symbol an d data box are removed. Note: The M OB proc edure can also be initiate d or cancelled if the appr opri- ate SeaTalk message is received by the dis play unit.
6-8 hsb 2 PLUS S eries Col or LCD Disp lay GPS Setup 6.6 GPS Setup GPS set up page provi des you with informa tion and th e status of the tracked navigati on satellit es for a SeaT alk GPS. It also enables you to SET UP a SeaT alk Dif ferential GPS, by manuall y retunin g it to a differe nt dif ferential beacon.
Chapter 6: Fur ther Chart Operat ions 6-9 GPS Setup Restart GPS This soft key enabl es re-acquis ition of a GPS positi on fix. Note: Under normal circumstances R ESTART GP S is not required.
6-10 hsb 2 PLUS S eries Col or LCD Disp lay Data Log Mode Note: If the display unit is recei ving RTCM data via NMEA, repeating a dif- ferenti al fix from another unit , the MODE soft ke y is set to AU TO and is grayed out. If r eceiving RT C M data, the s ettin g must be pe rformed manuall y on the external DGPS r eceiv er .
Chapter 6: Fur ther Chart Operat ions 6-11 Data Log Mode F igure 6-5: Data Log Window ➤ T o stop re cording log entri es: Press t he ST OP LOG soft key . ➤ T o clear the log entri es: Press the CLEAR L OG soft key , you are prompt ed “Are Y ou Sure”.
6-12 hsb 2 PLUS S eries Col or LCD Disp lay Data Log Mode.
Chapter 7: Setting Up the System Defaults 7-1 Intr odu ctio n Chapter 7: Setting Up the Sys tem Defaults 7.1 Intr oduction Once you ha ve instal led your di splay unit and are famili ar with i ts basi.
7-2 hsb 2 PLUS S eries Col or LCD Disp lay Changing the Set U p P arameters 7.2 Chan ging the Set Up P ar ameters The set up para meters are divided i nto four section s: • System , to control the aspec ts of t he system t hat are n ot spec ific to the radar o r chart .
Chapter 7: Setting Up the System Defaults 7-3 Changing the Set Up P aram ete rs • For paramet ers that have a numer ic value, or more th an four pos sible settings , a scroll list is displa yed above t wo of th e soft k eys. • Some parameter s are controll ed by a slider that is dis played above two of the s oft keys.
7-4 hsb 2 PLUS S eries Col or LCD Disp lay System Set Up P arameters 7.3 S ystem Set Up P ar amete rs The foll owing table lists t he System menus and thei r options, shows t he factory def ault settin g, and provides a space for you to make a note of your new defa ult setting.
Chapter 7: Setting Up the System Defaults 7-5 System Set Up P aram ete rs TEMPERA TURE UNITS CENTIGRADE, F AHRENHEIT F AHRENHEIT VA R I AT I O N S O U R C E AU TO, M A N UA L AU TO BRI DGE N MEA HEAD .
7-6 hsb 2 PLUS S eries Col or LCD Disp lay Data Boxes Data Bo xes Press the SELECT B O XES soft key to display t he data box s ub-menu. This al lows you to select up to 6 data boxes that you can display on the fishfinder . Note: 1. A fixed set of 16 of these data items are available for disp lay in the Nav Data half-scr een window (see Chapter 2).
Chapter 7: Setting Up the System Defaults 7-7 Day/ Nig ht Day/Night This option all ows you to change the displa y between day and night modes. If you select NIGHT mode, a dif ferent color palett e, more suited to night time viewing i s used.
7-8 hsb 2 PLUS S eries Col or LCD Disp lay V ariat ion Source V ariation Sour ce The varia tion value is the dif ference be tween T rue and Magneti c direct ion data for headi ng or bearing values.
Chapter 7: Setting Up the System Defaults 7-9 NMEA Out Set Up For example , if you h ave a course compute r connected on SeaT alk and NMEA, and an active compass conn ected on NMEA (for MARP A), SeaT alk data overri des NMEA data in the course computer .
7-10 hsb 2 PLUS S eries Col or LCD Disp lay GPS SOG/COG Filter GPS SOG/COG Fil ter The SOG/COG fil ter avera ges the ve locity vec tors to compensate f or the oscilla ting motion of the vesse l, giving a clearer indication of the vessel ’ s course and speed.
Chapter 7: Setting Up the System Defaults 7-11 Radar Set Up P aram ete rs 7.4 Radar Set Up P a r ameters The R ADA R SET UP opti on allo ws you to set u p the radar accor ding to your system configura tion and yo ur persona l preferenc es.
7-12 hsb 2 PLUS S eries Col or LCD Disp lay T imed T ransmission Opti on Timed T r ansmissi on Option The TIMED TRA NSMIT pa rameter , together wi th the TX PERI OD and ST ANDBY PERIOD pa rameters, controls the radar’ s timed transm ission power -saving mod e.
Chapter 7: Setting Up the System Defaults 7-13 Bearing Alig nment T o change t he ran ge scale, highlight the requ ired rang e and use t he soft keys to ch ange the va lue. S tart at the top of the lis t and work down , since each valu e must b e greate r than the valu e for the previous range in the l ist.
7-14 hsb 2 PLUS S eries Col or LCD Disp lay MARP A Set Up P arameters 7.5 MARP A Set Up Par ameters The MARP A set up menu provid es opti ons to sp ecify the tar get vector s, safe zone and tar get his tory display .
Chapter 7: Setting Up the System Defaults 7-15 Advanced Settings 7.6 Advanced Settings The ADV ANCED SET UP opti on allows you to s et up valu es for the fo llowing three parameters th at aff ect the fine -tuning of th e radar .
7-16 hsb 2 PLUS S eries Col or LCD Disp lay STC Preset Under cert ain circ umstances, it may be ea sier to a djust th e display timing with MBS (Main Ban g Suppressi on) of f; press the MBS sof t key to to ggle the se tting OFF . MBS is reset to ON auto matica lly when you finish ad just- ing th e display timing.
Chapter 7: Setting Up the System Defaults 7-17 Chart Set Up P aram ete rs 7.7 Chart Set Up P a r ameters The CHAR T SE T UP optio n allo ws you to s et up the chartplot ter accor ding t o your syst em configura tion and y our personal prefere nces.
7-18 hsb 2 PLUS S eries Col or LCD Disp lay Plotter Mode •c h a r t t e x t ( on , off, c ustom) • chart text size (small, normal , lar ge) • chart di splay ( det ailed , simple) • chart bou n.
Chapter 7: Setting Up the System Defaults 7-19 Object Information Object In formati on Y ou can set Object Info rmation ON or OFF . When set ON , object in formation is displayed in normal chartp lotter op eration when the curs or is pl aced ove r a chart ob ject for two seconds .
7-20 hsb 2 PLUS S eries Col or LCD Disp lay P osition Offset CAUTION: Changing the chart datum does not cause any waypoint or r outes stor ed in the chartplot ter to move on the display , although their lat itude and longitude changes to r efle ct the new datum.
Chapter 8: Insta llation 8-1 Introduc tion Chapter 8: Installation 8.1 Intr oduction This chapt er provid es ins tallation instruct ions for the hsb 2 seri es Color LCD Display . Simple sys tems such as that i n Figur e 8-1 below , or int egrated syste ms (see Sec tion 8.
8-2 hsb 2 PLUS S eries Col or LCD Disp lay Planning the Installati on Note: If you wish to practic e using t he display before install ation, connec t a 12V or 24V DC power su pply (connec ting the red wire via a 6.3A qu ick blow fuse to posit ive and the black wire to negat ive) and using the si mulator mode, as descri bed in Chapt er 2.
Chapter 8: Insta llation 8-3 EMC Installatio n Guidelines • At le ast 3 ft (1 m) fr om any equipment transmit ting or c ables car rying radio signal s e.g. VHF radios, cables and antennas. In the case of SSB radios, t he distanc e should be increase d to 7 ft (2 m ).
8-4 hsb 2 PLUS S eries Col or LCD Disp lay Unpacki ng and Inspecting the Components 8.2 Unpac king a nd Insp ecting th e Comp onents Unpack your system care fully , to prevent dama ge to the equipment. Save the carton and packi ng, in case you need to return a unit for service.
Chapter 8: Insta llation 8-5 Selecting the Display Unit Loca tion 8.3 Selecting the Di splay Unit Locat ion The display unit can be mounted using the mounting bracket supplied, or console mounted usi ng the optional fl ush-mounti ng kit. The dimensions of the display units, incl uding the bracket, are shown in Figur e 8-3 and Figur e 8-4 .
8-6 hsb 2 PLUS S eries Col or LCD Disp lay Selecting the Display Unit Lo cation F igure 8-3: 7 ” LCD Col or Display Dimensions DISPLAY GAIN VRM/EBL MULTI MARKS ALARMS RANGE ENTER CLEAR MENU POWER Weight: 7.7 lbs (3.5 Kg) Compass Safe Distance: 39 in (1 m) 10.
Chapter 8: Insta llation 8-7 Selecting the Display Unit Loca tion F igure 8-4: 10.4 ” LCD Co lor Display Dim ensions D5066-1 11.5 in (292 mm) 3.82 in (97 mm) 6.38 in (162 mm) cable clearance Weight: 12.65 lbs (5.75 kg) Compass Safe Distance: 39 in (1 m) 12.
8-8 hsb 2 PLUS S eries Col or LCD Disp lay Cable R uns 8.4 Cable Runs Consider the fol lowing before ins talling the sys tem cables: • Y ou nee d to att ach the power cable a nd the sca nner cable. Additional cables wi ll be re quired if you ar e instal ling an i ntegrated system.
Chapter 8: Insta llation 8-9 Inter -Unit Scanner Cable If a longer power ca ble run is require d, use the supplied power cable to connect to the di splay unit. Then use a sui table conne ctor block t o connect t he free end to the extension cable, taki ng partic ular care to ensur e correct polarit y .
8-10 hsb 2 PLUS S eries Col or LCD Disp lay Mounting the Display Unit 8.5 Mounting the Display Unit The hsb 2 serie s LCD display unit is waterpro of to CFR46 and can be installed either above or be low deck.
Chapter 8: Insta llation 8-11 Mounting the Display Unit CAUTION: Make sure ther e ar e no hidden electric al wires or othe r items behind the location befor e proc eeding. Make sure there is suff icient r ear ac cess for mounting and cabling. 1. Check the select ed location for th e unit.
8-12 hsb 2 PLUS S eries Col or LCD Disp lay System Connection s 8.6 S ystem Connections Gr ound ing the System It is importan t that an ef fective RF ground is conn ected to the system.
Chapter 8: Insta llation 8-13 Display Unit Connecti on Display Uni t Connection The rear of the hsb 2 series LCD displa y provides the foll owing connection sockets: • Scanner (antenna) con nection • hsb 2 , in/out connec tor for co nnecting to another hsb 2 or HSB ser ies displa y .
8-14 hsb 2 PLUS S eries Col or LCD Disp lay Display Unit Connect ion Scanner Conn ectio n (mas ter dis plays ) Connect th e inte r-u nit cable plug to the rear scanner co nnector . If y ou are usi ng an inter -unit ext ension cable, conne ct this to the display unit , and connect the supplied cabl e to the extension cable.
Chapter 8: Insta llation 8-15 Display Unit Connecti on P ower and NMEA Input Connect ion The DC power and NMEA input should be connect ed at the rear Power/ NMEA seven-pi n connector . The connector (v iewed from t he outs ide) and pin functions are shown in the following diagra m and table.
8-16 hsb 2 PLUS S eries Col or LCD Disp lay Radar System T ests and Installatio n Ali gnme nt 8.7 R adar System T ests and Installation Alignmen t Once you have instal led your Pathfinde r Plus Radar System and made all the connection s, you ne ed to chec k your ins tallatio n and perfo rm the System T ests before u sing the s ystem for navigation.
Chapter 8: Insta llation 8-17 Radar System Chec ks and Adjustments F i gure 8-9: System Set Up Menu 3. Use the trac kpad to move the selection ba r down to the LANGU AGE option. the soft key labe ls are up dated. 4. Use the soft keys to high light the required languag e.
8-18 hsb 2 PLUS S eries Col or LCD Disp lay Radar System Chec ks and Adjustments T o switch to tra nsmit mode, pre ss and release the POWER key . The antenna sweep should star t to build up the radar pi cture. Run through the opera tions describ ed in Chapter 3 and chec k that all the expected dat a is displayed.
Chapter 8: Insta llation 8-19 Radar System Chec ks and Adjustments ➤ T o adjust the radar to elimin ate the a lignment error: 1. If a visual re lative bearing of a tar get has been determined, as in 2.1 abo ve, set an EBL to this re lative beari ng.
8-20 hsb 2 PLUS S eries Col or LCD Disp lay EMC Conformance Incorrec t timing is most notice able on the 1 / 8 nm or ¼ nm range scales. T argets such as bridges or piers a ppear bent or bowed. Note: Under normal circumstances you do not nee d to adjust these se ttings, as they are set automatical ly at the factory .
Chapter 8: Insta llation 8-21 Integrated Systems 8.8 Integrated Systems The hsb 2 ser ies displ ays can be linked t o other e quipment to transf er data as follo ws: • Additional displays, either CR T or LCD, can be connec ted via hsb 2 (and SeaT alk) to repeat fish finder , char t and/or radar in formatio n at a remote location.
8-22 hsb 2 PLUS S eries Col or LCD Disp lay hsb 2 ™ (High Sp eed Bus) Multiple Di splay Systems The High Sp eed Bus ( hsb 2 ) provides extremely rapid transfer of data betwe en master an d repeater displays. W ith an hsb 2 and a SeaT alk conne ction most data availabl e can be controlled and displayed by any hsb 2 unit in the system.
Chapter 8: Insta llation 8-23 hsb 2 ™ (High Speed Bus) Multip le Display Syst ems Note: The hsb 2 cables hav e ferrite cla mps attached at each end t o ensure EMC conforma nce.
8-24 hsb 2 PLUS S eries Col or LCD Disp lay SeaT alk ® and NMEA In SeaT alk ® and NMEA In The hsb 2 ser ies displ ay can re ceive a c omprehensive range of data. The primary da ta is de scribed be low: *Accurate heading data is requir ed for MARP A and r adar/char t overlay , and it must be pr ovided on NMEA.
Chapter 8: Insta llation 8-25 SeaT alk ® and NMEA In F i gure 8- 14: Integrated Sy stem with Repeat er Display and SeaT alk Instruments D5702-1 NMEA 12/24V Supply 12/24V Supply 12/24V Supply 12/24V S.
8-26 hsb 2 PLUS S eries Col or LCD Disp lay SeaT alk ® and NMEA In F igure 8-15: Inte grated System with Repe ater Display and NMEA In struments SeaT alk The SeaT alk standard was origi nally developed by Autohelm (par t of Raymarine), and all ows compatible inst ruments to be connect ed by a single cable carr ying power and data in/out .
Chapter 8: Insta llation 8-27 SeaT alk ® and NMEA In SeaTalk Connection This connecti on is necessary for full functiona lity between hsb 2 seri es displays. Sea T alk data, if pres ent, is the primary sour ce for all navigation al data except hea ding.
8-28 hsb 2 PLUS S eries Col or LCD Disp lay SeaT alk ® and NMEA In NMEA 0183 The NMEA 0183 Data Interface S tandard was devel oped by the National Marine El ectronics As sociation of Ame rica. It is an internat ional standa rd that enables equi pment from many dif ferent manuf acturers to be conne cted toge ther a nd to sha re inf ormat ion.
Chapter 8: Insta llation 8-29 Using the SeaT alk Auxiliary Ju nction Box Using the SeaT alk Au xiliar y Junct ion Bo x A junction bo x (provided with the rad ar/chart and cha rt displays; optio nal with the r adar displa ys) is used to connect t he SeaT alk system to the hsb 2 seri es display uni t.
8-30 hsb 2 PLUS S eries Col or LCD Disp lay Data Output Data O utput Data is transmi tted in SeaT alk and NMEA formats as det ailed in Appen dix D and can be used to enhance oth er equipment as requi red. Y ou can disable the transmiss ion of individual NMEA output sentences - refer to NMEA Out Set Up on page 7-9 .
Chapter 8: Insta llation 8-31 Integrated System Checks 8.9 Integrated System Checks Chart D isplay -RL70/ 80CRC PLUS, RC530 PLUS, RC 631 PLUS When you have connected your di splay unit to the requ ired equipment ensur e that pos ition dat a is avai lable at the dis play via NMEA or SeaT alk.
8-32 hsb 2 PLUS S eries Col or LCD Disp lay T ransmitted Data.
Chapter 9: Main tenance and Problem Solv ing 9-1 Main tena nce Chapter 9: Maintenance and Pr oblem Solving This chapter provides informat ion on routine mainte nance and on possible causes of problems y ou may experi ence with your hsb 2 series display unit.
9-2 hsb 2 PLUS S eries Col or LCD Disp lay EMC Servicin g and Safety Guid elines • When powered up, all el ectrical equ ipment produces electr omagnetic fields. These can c ause adjac ent pi eces of el ectrical e quipment to intera ct with one ano ther , with a consequent adverse ef fect on operati on.
Chapter 9: Main tenance and Problem Solv ing 9-3 Resetting the System 9.2 R esetting the System There ar e three t ypes of r eset available for the display: • Factory Reset: Th is resets all values back to th eir origi nal factor y settings .
9-4 hsb 2 PLUS S eries Col or LCD Disp lay Problem Solvi ng 9.3 Problem So lving All Raymarine produc ts are, prior to pack ing and shipping, subje cted to comprehe nsive test and quali ty assura nce programs.
Chapter 9: Main tenance and Problem Solv ing 9-5 How to Contact Raymarine ( US) How to Contact Raym arine (US) For Marin e Pr oduct and Serv ices Info rmatio n V isit the Raymarine W orld W ide W eb site for the la test informat ion on the newest Raymarine el ectronic equi pment and systems at: www .
9-6 hsb 2 PLUS S eries Col or LCD Disp lay How to Contact Raymarine (E urope) How to Contact Raymarin e (Eur ope) In Europe, Ra ymarine support, s ervice a nd accessor ies may be o btained from your a.
Append ix A: Speci ficat ion A-1 Specification Appendix A: Specification hsb 2 Series 7" and 10 .4" LCD Colo r Displa ys General Approvals: CE - confo rm to FCC - confo rms to 1999/5/ EC, EN60945:1997 P art 80 (47CFR) and P art 2 (47 CFR) Size: 7 ” 10.
A-2 hsb 2 PLUS S eries Col or LCD Disp lay hsb 2 Series 7"and 10.4" LCD Color Displays Radar Featur es Cursor Echo Cur sor Echo betw een radar a nd chart on split scr een and/or separate displays connected via SeaT alk.
Append ix A: Speci ficat ion A-3 hsb 2 Series 7"and 10.4" LCD Color Displays Chartp lotter Featur es Zoom Mode x2, from 0.25 nm to maxi mum range , in 1/4 window and fu ll screen from 1/4 window .
A-4 hsb 2 PLUS S eries Col or LCD Disp lay hsb 2 Series 7"and 10.4" LCD Color Displays Inte rfacin g Hig h Speed Bu s Fully in dependent use of remote Char t data if pre sent on hsb 2 .
Append ix B: Usi ng the Auxiliar y Juncti on Box B-1 Usin g th e Aux ilia ry Junction Bo x Appendix B: U sing the Auxiliary Junction Box The SeaT alk Auxiliar y Junction Box is used to connect SeaT alk GPS and Dif ferential beacon re ceivers t o your hsb 2 series display .
B-2 hsb 2 PLUS S eries Col or LCD Disp lay Raystar 112, 105, Apelco 182 and 182XT Rays tar 112, 105, Ape lco 182 and 18 2XT In order to connec t your GPS t o your hsb 2 display , you must first cut of f the 6- pin connec tor and s trip back the insul ation on all the wires.
Append ix B: Usi ng the Auxiliar y Juncti on Box B-3 Raystar 112, 105, Apelco 182 and 182XT Autohelm GPS , Z26 0 and Z273 T o connect your GPS t o your hsb 2 displ ay connect the wires as shown i n the first il lustrati on below .
B-4 hsb 2 PLUS S eries Col or LCD Disp lay Raystar 112, 105, Apelco 182 and 182XT Raystar 112LP (SeaT alk versi on) T o connect your Rayst ar 1 12LP to your hsb 2 display , refer to the fi rst illus trati on belo w or fol low the instruc tions in Chapter 8 .
Append ix B: Usi ng the Auxiliar y Juncti on Box B-5 Raystar 112, 105, Apelco 182 and 182XT Raystar 114 Combined GPS and Di ffer ential Beacon Receiver T o connect your Rayst ar 1 14 Combined GPS and .
B-6 hsb 2 PLUS S eries Col or LCD Disp lay Raystar 120 WAAS Satel lite Diff erential Receiver Ray star 120 WAAS Sa tellite Differential Re ceiver T o connect your Raystar 120 W AAS Satellite Diff erential Rece iv er to your hsb 2 display , connect to the Auxil iary Juncti on Box as sho wn in the ill ustratio n belo w .
Appendix C: C- MAP Chart Card F eatures C-1 C-MAP Chart Card Fe a t u r e s Appendix C: C-MAP Chart Card Featur es The C_MAP chart cards dis play carto graphic features which a re derived from a libra ry of symbols . The li brary incl udes a set of 16 x 16 pixel bit maps which provide r ealisti cally shap ed icons f or many chart obje cts.
C-2 hsb 2 PLUS S eries Col or LCD Disp lay C-MAP Cha rt Card Fe a t ur e s CA UTIO N & ROUT ING DAT A Caution A reas Caution a rea F ishing facility Marin e farm/cul - ture Cable, submarin e Cable.
Appendix C: C- MAP Chart Card F eatures C-3 C-MAP Chart Card Fe a t u r e s LAND FEA TURES Natural Features Coastline Dune Hill Lan d elevat ion Land re gion Lan d Salt p an Slope to pline Tr e e V eg.
C-4 hsb 2 PLUS S eries Col or LCD Disp lay C-MAP Cha rt Card Fe a t ur e s The following char t features ar e always displayed : Menu option Chart features PORT S Ports: Berthing facility Cause way Ch.
Appendix C: C- MAP Chart Card F eatures C-5 C-MAP Chart Card Fe a t u r e s ROCKS Underwater Rock WRECKS Wrecks DEPTHS 1 Dept h area DEPTHS 2 Dr edged area DEPTHS 3 I ntertidal area POR TS Moo ring/W .
C-6 hsb 2 PLUS S eries Col or LCD Disp lay C-MAP Cha rt Card Fe a t ur e s.
Appendix D: SeaT alk and NME A Data Rece ived and T ransmit ted D-1 Sea T alk an d NMEA Data Received and T ransmitted Appendix D: SeaT alk and NMEA Data Received and T r ansmitted The foll owing table defines t he data r eceived on the NMEA/SeaT alk ports .
D-2 hsb 2 PLUS S eries Col or LCD Disp lay Sea T alk and N MEA Data Rece ived and T ransmitted The hsb 2 seri es displa y unit tr ansmits t he followi ng data, if a vailable , on SeaT alk: 1 When availa ble, NMEA OUT data is transmi tted from RL70R C and RC520, or from RL70 if connected to a Chart dis play via hsb 2 .
Appendix E: Connecting a Raymarine Heading Sensor E-1 Connecting a Raym arine Headin g Sensor Appendix E: Connecting a Raymarine Heading Sensor The perfo rmance of M ARP A and radar/chart overlay on t he hsb 2 displays is dependent on the qual ity of your heading se nsor .
E-2 hsb 2 PLUS S eries Col or LCD Disp lay G-Series Course Computer Fi g u r e E - 1 : hsb 2 System wi th a G-S eries Course Co mputer D5669-2 DISPLAY RANGE MARKS VRM/EBL ALARMS GAIN SEA MULTI MOB ENT.
Appendix F: Abbreviations F-1 Abbreviations Appendix F: Abbr eviations AA m p ANSI A meric an National S tandards I nstitute A WG Am erican W ire Ga uge BDI B eari ng and Distance Indic ator Brg Beari.
F-2 hsb 2 PLUS S eries Col or LCD Disp lay Abbreviations lat latit ude lbs pounds LCD Liqui d Crystal Display lon longitu de MM a g n e t i c mm e t e r s MARP A M ini Automat ic Radar Plottin g Aid M.
xv Index A Accessories 8. 4 Acquire a T arget 3.26 Adding a W aypoi nt to a Route 5. 19 , 5.2 8 Adjusting Gain, Sea Clut ter and Rain Clutter 3.7 Advanced Set Up 7. 2 , 7.15 Displa y T iming 7.15 STC Prese t 7.16 T une Preset 7.16 Alarm Clock Alarm 6.
xvi hsb 2 PLUS S eries Col or LCD Disp lay Connectio ns 8.12 Display Unit 8.13 HSB2 8.13 , 8.22 NMEA Input 8.13 , 8.24 , 8.2 8 NMEA Output 8.13 , 8. 30 , 8.31 Power 8.12 Power & NMEA In 8.13 , 8.15 , 8.28 Scanner 8.13 , 8.14 SeaT alk 8. 13 , 8.24 , 8.
xvii MUL TI 2.6 , 3.7 , 3.22 POWER 1. 18 , 2. 2 , 2.3 , 2.4 RANGE 1.1 8 , 2.21 , 2.2 2 , 3.2 , 5.2 VRM/EBL 1.18 , 3. 13 , 3.14 , 6. 1 , 6.3 De letin g a Guard Z one 3.19 , 3. 21 a Mark 4.5 a VRM/EBL 3.16 De letin g - See also E rasi ng Depth Data B ox 7.
xviii hsb 2 PLUS S eries Col or LCD Disp lay H Half Screen W i ndows 1.6 , 2.7 Selectin g 2.8 Head Up 4.2 , 7.18 Heading 7.5 , 8.30 Heading Data 1.9 , 2.23 , 3. 23 , 4.1 , 4.5 , 6.1 , 6. 6 , 7.8 , E. 1 Heading Data Box 7.4 Headin g Mode 4.2 , 7.18 Chan ging 4.
xix Moving a Data Box 2.1 4 , 3.18 a Floa ting EBL 3.17 a Guard Z one 3.19 , 3. 21 a Mark 4.5 a VRM/EBL 3.15 a W aypoi nt 5.9 , 5.14 , 5.19 , 5. 27 the Cursor 1. 17 MUL TI Key 1.18 , 2.6 , 3.5 , 3.7 , 3.22 Multiple Disp lay System Conn ection s 8.23 Installation 8.
xx hsb 2 PLUS S eries Col or LCD Disp lay Definition 1.3 Options 1. 10 Range Rings 2.18 Radar Master 1.3 Radar Mode 1.6 , 1.8 Radar Repeater 1.3 Radar System 1.5 Radar/Chart Overlay 1.13 , 2.23 Heading Data 1.9 Mode 1. 6 , 1.8 , 2.7 Radar /Char t Synchr onization 1.
xxi Servicing EMC Guidelin es 9.1 Set Up Option s 1.6 , 2.15 Set Up Para meters GPS Set Up 6.9 Seting Up a GPS 6.9 Setti ng Ala rms and T imers 6.1 , 6.5 Setting Up a GPS 6.1 , 6.8 Advanced Ra dar Options 7.2 , 7.15 Chart Parameters 7.2 , 7.17 GPS Set Up Restart GPS 6.
xxii hsb 2 PLUS S eries Col or LCD Disp lay V V ariation S ource 7.5 , 7.8 V ecto rs 7.17 , 7.19 MARP A T arget 7.14 VMG Data Box 7.4 VRM (V aria ble Range Markers) 3.1 , 3.13 VRM/EBL 3.14 , 3. 15 , 3. 16 Effect o f Headin g Mode 4.3 VRM/EBL Key 1.18 , 3.
Documen t nu mber: 84 066-8 April 20 01 Limited W arr anty Certificate Raymarin e warrants each ne w Light Mari ne/Dealer Dist ributor Prod uct to be of good ma terials and workmanshi p, and will r ep.
Factory S ervice Cen ters United States of Ameri ca UK, Eur ope , Middle East, F ar Eas t Raymarine Inc 22 Cotton Road, Unit D Nashua, NH 030 63-4219, USA Raymarine Ltd Anchorage P ark, P ortsmo uth PO3 5TD , England T ele phone: +1 603 881 520 0 F ax: +1 603 864 475 6 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Raymarine Combined Pathfinder Radar è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Raymarine Combined Pathfinder Radar - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Raymarine Combined Pathfinder Radar imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Raymarine Combined Pathfinder Radar ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Raymarine Combined Pathfinder Radar, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Raymarine Combined Pathfinder Radar.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Raymarine Combined Pathfinder Radar. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Raymarine Combined Pathfinder Radar insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
