Manuale d’uso / di manutenzione del prodotto EFG 502 del fabbricante Prolific Tech
Vai alla pagina of 20
PRO line GAS COOKER EFG 502 GB.
2.
3 CONTENTS Instructions for the user Inst ructions for the installer Important Safety Information Description of the appliance Technical Features Using the appliance - Before using the cooker for the .
4 IMPORTANT SAFETY INFORMATION You MUST read these w arnings carefully before installing or using the appliance. Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.
5 DESCRIPTION OF THE APPLIANCE 155 Contr ol panel Oven door glas s Door h and le Ad jus table feet 170 190 210 230 250 270 285 300 Hob 2 1 3 4 2000W 2000W 1000W 2600W semi -rapi d semi -rapi d aux iliar y rapid 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3.
6 TECHNICAL FEATURES Free standing Class 1 Hob Pan support Front right burner Back right burner Front left burner Back left burner Enamelled Rapid Auxiliary Semi rapid Semi rapid 2,60 kW 1,00 kW 2,00 .
7 USING THE APPLIANCE Before using the cooker for the first time Remove all packaging both inside and outside of the cooker, before using it. Before using for the first time, the oven should be heated without food. During this time, an unpleasant odour may be emitted.
8 Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the oven door and lift the small flap on the bottom of the oven cavity. • Hold a lit match or taper to the oven burner. • Push and turn the oven thermostat control knob in a anticlockwise direction to the maximum position 250 degrees C.
9 Cooking with the grill Whenever the grill is in use the heat deflection shield must be fitted to prevent the overheating of the control knobs and facia panel. • First of all fit the heat deflection shield "A" • Hold a lighted match or taper to the grill burner.
10 Using the Hob The Hob Burners The symbol on the knob corresponds to a symbol on the control panel (See description of appliance). Off Maximum level Minimum level Use the maximum position for boiling and the minimum for simmering. Always choose positions between the minimum and maximum, never between maximum and off.
11 Selecting the Correct burner Above every control knob there is a symbol for the corresponding burner. For good cooking results, always choose pans, which correctly fit to the diameter of the burner used (see figs). Choose thick, flat bottom pans. We recommend the flame is lowered as soon as the liquid starts boiling.
12 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely .
13 Oven Cavity The enameled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
14 BEFORE YOU CALL FOR SERVICE If the appliance is not working correctly, please carry out t he following checks, before contacting your local Comet Service Centre. Symptoms Solutions 1. No burner ignition 2. The gas ring burns unevenly 3. The oven or grill burner will not ignite.
15 INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE Important This appliance is supplied for use on NATURAL GAS ONLY and cannot be used for any other gas w ithout modification. Conversion for use on other gases must only be undertaken by a qualified person.
16 INSTALLATION Positioning Remove all the packaging and install the cooker in a dry well, ventilated room away from curtains, paper, alcohol, petrol etc. (See figure). This appliance is approved to class “1” regarding overheating of surrounding surfaces.
17 1 Fitting the adjustable feet Unpack the support brackets with the feet attached. Place a piece of cloth/cardboard onto your floor to prtect both your floor and the cooker. Lay the cooker on its back, fit the support brackets (see fig) using the bolts, washers and nuts supplied and ensure that the nuts are tight.
18 Hob burners • Remove the pan support; • Remove the caps and the burner crowns; • Using a No 7 socket spanner unscrew the injectors and replace them with those required for the type of gas in use (see table no. 1). Reassemble the parts following the same procedure in reverse.
19 Grill burner To replace the grill injector, follow this procedure: • Remove the grill burner after removing the fixing screw. • Replace the injector by means of a No 10 socket spanner; • Refit all parts and test. Flame adjustment Oven burner The burner is correctly adjusted when the flame is stable, silent and goes out without any noise.
..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Prolific Tech EFG 502 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Prolific Tech EFG 502 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Prolific Tech EFG 502 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Prolific Tech EFG 502 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Prolific Tech EFG 502, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Prolific Tech EFG 502.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Prolific Tech EFG 502. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Prolific Tech EFG 502 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
