Manuale d’uso / di manutenzione del prodotto KG-PS120X del fabbricante PLUS Vision
Vai alla pagina of 67
IMPORT ANT * DLP ® (Digital Light Processing) and DLP ® chip are registered trademarks of T exas Instru-ments Incor porated (U .S.A.). * V GA and XGA are trademarks or registered trademarks of Inter national Business Machines Cor poration (U .S.A.).
DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
E-2 IMPORT ANT SAFETY INFORMA TION Hg: Lamp in This Pr oduct Contains Mercury . Dispose of Lamp Accor ding to Local, State or Federal Law . Precautions Please read this manual carefully bef ore using your KA GA COMPONENTS Data Projector and keep the manual handy for future ref erence.
E-3 IMPORT ANT SAFETY INFORMA TION W ARNING This is a class A product. In a domestic environment this product ma y cause radio interference in which case the user ma y be required to take adequate measures.
E-4 Important Safeguards These saf ety instr uctions are to ensure the long lif e of the unit and to prev ent fire and shock. Please read them carefully and heed all warnings. Installation • For best results , use the unit in a darkened room. • Place the unit on a flat, le vel surface in a dry area aw ay from dust and moisture .
E-5 Major Featur es 䡵 High-brightness, lightweight pr ojector with wireless network presentation and PC-less presentation functions The synergy of DLP ® technology and the unique optical design raises the efficiency of light usage . One DLP ® chip reproduces the three primary colors (red, green, and blue) required in the expression of color .
E-6 T able of Contents IMPORT ANT SAFETY INFORMA TION ................................................................................... E-2 Major Features ..............................................................................................
E-7 T able of Contents View ........................................................................................................................... ............ E-46 Aspect Ratio ....................................................................
E-8 Checking the Supplied Accessories Remov e the main unit and the accessor ies from the bo x and check that the f ollowing items are included. “W ARNING” Handling the cables supplied with this pr oduct, will ex- pose y ou to lead, a chemical known to the State of Cali- f ornia to cause bir th defects or other repr oductive harm.
E-9 Checking the Supplied Accessories Storage case (for pr ojector and accessories) [1] This case is designed to hold the projector itself and its acces- sories.
E-10 Names of the Main Unit Parts S O U R C E K E Y S T O N E A U T O K E Y S T O N E P O W E R S T A N D B Y ST A TU S M E N U Q U IC K M E N U Adjuster button [E-25] Focus ring [E-25] Exhaust vents .
E-11 Names of the Main Unit P ar ts S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY STA TUS MENU QUICK MENU S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY ST ATUS .
E-12 Names of the Remote Contr ol Parts Precautions Handling of the Remote Control * Do not drop the r emote control or handle it inappropriately . * Do not expose the remote contr ol to water or other liquids. Should the remote contr ol become wet, wipe it dry immediately .
E-13 Using the remote contr ol for the first time The battery compar tment is fitted with a transpor tation insulation sheet at the time of shipping. Pull out the sheet and remov e it. The remote control is now ready for use . Replacement Method 1 (A) With the knob pressed to the right side, (B) draw out the battery case.
E-14 The Pr ocedure Up to Pr ojecting to the Screen P erform setup adjustments in the f ollowing order . 1 Position the pr ojector Determine the locations to set up the screen and the projector. See “ Placement Guide ” on P age E-15. 2 Connect the video equipment and personal computer Connect your equipment to the pr ojector .
E-15 Placement Guide • Use this information as a guide to find out about the screen size when the pr ojector is placed at a cer tain location, or to find out the appro ximate siz e of a screen that will be required. • The projection distance over whic h focussing is adjustable is 1.
E-16 Connecting Personal Computers and V ideo Equipment Connecting this unit with a personal computer permits presentation data to be pr ojected as a large screen display at conferences, lectures, and on other occasions.
E-17 Connecting P ersonal Computers and Video Equipment T o Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer startup procedure as well as the operation that follo ws notebook star tup.
E-18 VIDEO S-VIDEO Connecting P ersonal Computers and Video Equipment Connections with Composite Signals Video Equipment with VIDEO Connectors • Connect to the projector ’ s VIDEO connector using a commercially a vailable video cab le.
E-19 Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting P ersonal Computers and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • The.
E-20 R L AUDIO OUT Connecting P ersonal Computers and Video Equipment Connections with the AUDIO Jack * Connect to the projector ’ s A UDIO jack using a commercially av ailable audio cable . When the audio jac k of the equipment that is to be connected is of the RCA phono type, mak e connection via the supplied audio conv ersion adapter.
E-21 Power Cable Connections and Switching the Power On/Of f There is an order in whic h the power cable is connected and the power is s witched on/off. S O U R C E K E Y S T O N E A U T O K E Y S T O N E P O W E R S T A N D B Y S T A T U S M EN U Q U I C K M E N U Firmly plug in all the wa y .
E-22 When [Menu Language Select] is Displayed Upon Switching On the Power The first time the power is s witched on after purchase, [Menu Lan- guage Select] will be displa yed. Follo w the procedure descr ibed be- low and select the displa y language of the projector .
E-23 P ower Cable Connections and Switching the P ower On/Off Finishing 1 Switch off the power of the connected equip- ment 2 Switch off the power of the pr ojector Press the POWER/ST ANDBY button.
E-24 Adjustment of the Pr ojection Screen Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . 2 Adjust the projection image to the screen. Check that the screen is set le vel and v er tically .
E-25 Adjustment of the Projection Screen S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY STA TUS MENU QUICK MENU ( 2 ) ( 1 ) Note: When the projector has a rear installation is used, the orientation of the projection will need to be changed.
E-26 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see “Menu Operation Method” on P age E-34 and the various items on P ages E-41 to E-54.
E-27 General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT button while vie wing the projected image and select the aspect ratio.
E-28 Fr eezing a Moving Picture This function is used to stop and view a mo ving picture. Note that the input image continues to adv ance even though the picture there is a still picture condition. A press of the FREEZE button c hanges the screen to a still picture .
E-29 Keystone Manual Adjustment Use this to adjust f or trapezoidal (keystone) distor tion of the pro- jected image. The projector has both an automatic and a manual ke y- stone adjustment function.
E-30 General Operation Enlargement of the Image and V ideo Movement Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear . The reason for this is that the dots are being digi tally corrected so that they are not conspicuous.
E-31 General Operation Pr otecting the Projector with the Security Lock A passw ord can be registered and the security lock set in or der to protect the pr ojector from unauthorized use . Registering the passw ord The pass word is registered using the menus.
E-32 General Operation If the passw ord input display appear s when the power is turned on When a pass word has been registered, the “ P assword ” input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct pass word is input.
E-33 General Operation Using the Quick Menu This function permits frequently used adjustments to be per formed quickly . Note that the Quick Menu will not be displa yed unless the signal of the con- nected equipment is input. Please select the input that you wish to adjust.
E-34 Menu Operation Method • This section describes only the menu operation method. Please see this item should you need inf ormation while performing menu operations. • For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip- tions.
E-35 Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor mov es to the selected menu name. Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position.
E-36 Menu Operation Method Performing Menu Operations • Only “Setup”, “Options” and “Info. ” can be selected when no signal is being input. • The menu display will c lose if, after pressing a b utton, the ne xt button operation is not made within 30 seconds.
E-37 3 Press the SELECT button to display the item name selection cursor . Displaying the Cursor This condition al- lows selection of the item name.
E-38 Menu Operation Method 6 Press the MENU button and close the menu display Closing the Menu VIDEO FREEZE MUTE ECO VOL KSTN ZOOM CANCEL QUICK MENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ S.
E-39 List of Item Names Of fering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal. * “ Tint ” can be adjusted only in the NTSC system composite/S signal input mode, or in the component signal input mode.
E-40 Menu name Setup Info. Auto Source E-48 嘷嘷 Item Name Reference Page Sub Menu Item Name Auto Power Off E-48 嘷嘷 嘷嘷 Menu Position E-48 Input Format 嘷嘷 嘷嘷 Video S-Video E-49 Presen.
E-41 Image • Perf orm this operation while projecting the picture for which the adjustment/setting will be made. • Select the menu name “Image”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations.
E-42 Fine Picture Adjust this when the picture shows a lac k of color fidelity or flickering. Select the “ Fine Picture ” item name and adjust with the SELECT ( ) b ut- tons so that the lack of color fidelity or the flic kering disappears. Image H Position Adjust this when the picture is shifted to the left or right.
E-43 Color • Do the following operation while displa ying the image you want to adjust or set. • Select the menu name “Color”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal.
E-44 Color Color T emp. The screen color is affected b y the color of the illumination and other extraneous light. This function adjusts the white, which is the reference color for video equipment, and improves the quality of color repr oduction. Adjustment can also be used to enhance skin colors.
E-45 White Balance Color This function automatically adjusts the b lack level and the white level of the Computer input signal to suit the personal computer . 1 Select the item name [White Balance] and press the ENTER button. The display will change to [Input Blac k Signal].
E-46 V iew • Perf orm this operation while projecting the picture for which the adjustment/setting will be made. • Select the menu name “View”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations.
E-47 V ertical Flip / Horizontal Flip In selecting the method of pr ojecting to the screen, these functions are set when the pr ojector is in a rear screen installation. Select the item name “ V er tical Flip ” or “ Horizontal Flip ” and select the setting contents with the SELECT ( ) buttons .
E-48 Setup • Select menu name “Setup”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39.
E-49 Setup Eco Mode Use this if the picture is projected on a small screen and the picture is too bright or when projecting ima ges in dark rooms. Select the item name “ Eco Mode ” and select the setting contents with the SELECT ( ) buttons .
E-50 Setup Pr esentation Timer The presentation is given while chec king the timer displayed on the screen. The gauge display allo ws the remaining time to be known at a glance. Select the item name “ Presentation Timer ” and select the setting contents with the SELECT ( ) buttons .
E-51 Option • Select menu name “Option”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39.
E-52 Startup Screen Option This is the selection of whether or not to displa y the logo screen at startup time . Select item name “ Star tup Screen ” and select the setting contents with the SELECT ( ) buttons . Logo ........... Displays the logo.
E-53 Info. • Select menu name “Info. ”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39.
E-54 Resolution / Frequency Info. This function displays the resolution and frequency of the detected in- put signal. Lamp Timer This displays the lamp timer . This projector has an Eco mode function. The lamp lif e will differ between Normal mode and Eco mode.
E-55 When an Indicator is Lit or Flashing S O U R C E K E Y S T O A U T K E Y S T O N E POWER UIC K MENU STANDBY STATU S MENU The indicators on the pr ojector’ s control panel light or flash to notify of pr oblems, as described below . An indicator is also used to notify y ou of the currently set power mode.
E-56 T roubleshooting Check the following matters before r equesting servicing. • Is the power cord plugged into a po wer outlet? • Is the lamp cov er proper ly mounted? • Is the projector ’ s temperature high? T o protect the projector, the po wer can- not be tur ned on when the projector ’ s temperature is abnormally high.
E-57 Cleaning • Be cer tain to disconnect the power plug from the po wer outlet before cleaning. • Do not spra y or otherwise expose the projector , lens, or screen to volatile substances such as insecticides. Do not leav e r ubber or vinyl products in contact with the projector f or long periods.
E-58 Replacing the Lamp Cartridge • The lamp that is used as a light source in the pr ojector has a limited ser vice life. The rated service life of the lamp is about 2000 hours (when used in normal mode onl y). This could be shor tened depending on conditions of use and other factors.
E-59 Replacing the Lamp Cartridge Preparations: T urning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched mak es it easier to replace the lamp car tridge. T urn the projector r ight-side up after replacing the lamp cartr idge.
E-60 Replacing the Lamp Cartridge 5 Mount the new lamp cartridge . (1) Slowly push in the lamp car tridge. (Align it with the screw holes of the main unit.) 6 Mount the lamp cover . (1) Inser t the edge of the lamp cover into the main unit, then close the lamp cov er.
E-61 Specifications Model KG-PS100S Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 800 ⳯ 600 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.
E-62 Specifications Model KG-PS120X Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 1024 ⳯ 768 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.
E-63 Specifications Model KG-PS125X Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 1024 ⳯ 768 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.
E-64 T able of Supported Fr equency The projector automatically identifies the signal input from the computer and selects the optimum resolution as sho wn on the ta ble below . Manual adjustments ma y be required for some input signals . See “ Picture Adj.
E-65 Cabinet Dimensions S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY ST ATUS MENU QUICK MENU Unit: mm (inch) 195 (7.7) 58 (2.3) 262 (10.
2007, KAGA COMPONENTS CO., LTD..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il PLUS Vision KG-PS120X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del PLUS Vision KG-PS120X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso PLUS Vision KG-PS120X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul PLUS Vision KG-PS120X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il PLUS Vision KG-PS120X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del PLUS Vision KG-PS120X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il PLUS Vision KG-PS120X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo PLUS Vision KG-PS120X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
