Manuale d’uso / di manutenzione del prodotto WNRT-617 del fabbricante Planet
Vai alla pagina of 163
User ’ s Manual www.PLANET.com.tw 150Mbps 802.1 1n Wireless Broadband Router WNR T -617.
Copyright Copyright 2013 by PLANET T echnolog y Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into.
Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure se t forth for an uncontrol led environment.
Revision User’s Manual for PLANET 802.11n Wireless Broadband Router Model: WNRT-617 Rev: 2.0 (MAY. 2013) Part No: EM-WNRT -617v2_v2.0 (2081-E50200-002) IV.
CONTENTS Chapter 1. Product Intr oduction ......................................................................................................... 12 1.1 Package Co ntents ..............................................................................
5.7.5 Wireless St atis tics ................................................................................................... 73 5.8 DHCP ...............................................................................................................
5.18.1 Time Se ttings ........................................................................................................ 123 5.18.2 Diagnost ic .....................................................................................................
FIGURE F IGURE 2-1 WNR T -617 F RONT P ANEL ................................................................................................... 17 F IGURE 2-2 WNR T -617 F RONT P ANEL ...................................................................
F IGURE 5-13 PPP O E A DV A NCED S ETTINGS ........................................................................................... 51 F IGURE 5-14 WA N – B IG P OND C ABLE .........................................................................
F IGURE 5-53 A CCESS C ONTROL R ULE M ANAGEMENT ............................................................................. 97 F IGURE 5-54 A DD OR M ODIF Y I NTERNET A CCESS C ONTROL E NTR Y .........................................................
XI F IGURE 5-93 R EBOOT THE R OUTER ..................................................................................................... 129 F IGURE 5-94 P ASSWORD ......................................................................................
User ’s Man ual of WNRT -617 -12- Chapter 1. Product Introduction 1.1 Package Content s The following items should be containe d in the package: WNRT -617 Wireless Broadband Rout er Power Adapter Et.
User ’s Man ual of WNRT -617 -13- Wide Range of Wireless Security Support The WNRT -617 supports one W AN port for wired cabl e or DSL service connection. T o secure the wireless communication, the WNRT -617 support s up-to-date encryption, WP A-PSK/WP A2-PSK with TKIP/AES.
User ’s Man ual of WNRT -617 -14- Secure Network Connection Supports Wi-Fi Protected Setup (WPS) Advanced security: 64/128/152-bit WEP , WP A/WP A2 and WP A-PSK/WP A2-PSK(TKIP/AES encryption), 802.1x Supports NA T firewall features, with SPI function to protect again st DoS attacks.
User ’s Man ual of WNRT -617 -15- T ransmission Distance Indoor up to 100m Outdoor up to 300m (it is limited to the environme nt) Channel America/ FCC: 2.414~2. 462GHz (11 Ch annels) Europe/ ETSI: 2.412~2.472GHz (13 Ch annels) Japan/ TELEC: 2.412~2.
User ’s Man ual of WNRT -617 -16- Routing Protocol S tatic Routing VPN Pass-through PPTP , L2TP , IPSec Built-in DHCP server supporting static IP address distributing Supports UPnP , Dynamic DNS Sup.
User ’s Man ual of WNRT -617 -17- Chapter 2. Hardware Installation Please follow the instruction s below to build the wireless net work connection between W NRT -617 and your computers. 2.1 Hardware Description 2.1.1 The Front Panel The front pan el provides a simple interfa ce monitoring the router .
User ’s Man ual of WNRT -617 -18- LED Definition Figure 2-2 WNR T -617 Front Panel LED Stat u s Function On Power is on. PWR Off Power is off. On The Router is initializing. Flashing The Router is working p roperly . SYS Off The Router has a sy stem error .
User ’s Man ual of WNRT -617 -19- 2.1.3 The Rear Panel Figure 2-3 Rear Panel Interface Function POWER pter . ter provided with WNR T -617. The power socket is where you will connect the power ada Please use the power adap ON/OFF The button of the power .
User ’s Man ual of WNRT -617 -20- Chapter 3. Connecting the Router 3.1 System Requirement s Broadband Internet Access Service (DSL/Cable/Ethernet connection) One DSL/Cable Modem t hat has an RJ-45 conne ctor (not necessary if the Route r is connected directly to the Ethernet.
User ’s Man ual of WNRT -617 -21- Figure 3-1 Adjust the direction of the antenna Step 4. Connect the PC or Switch/Hub in your LAN to t he LAN Ports (Y ellow port s ) of the Router with Ethernet cable as shown in Figure 3-2 . Figure 3-2 Hardware Installation of the WNR T -617 Wireless Rout er Step 5.
User ’s Man ual of WNRT -617 -22- Chapter 4. Quick Installation Guide This chapter will show you how to con figure the ba sic functions of your wirel ess broadband router using Quick Setup within minutes. A computer with wired Ethernet connection to the Wirel ess Router is required for the first-time configuration.
User ’s Man ual of WNRT -617 -23- Figure 4-1 Change adapter settings 3) Right-click on the Wireless Network Connection, and select Properties in the appea ring window .
User ’s Man ual of WNRT -617 -24- 4) In the prompt window shown bel ow , double click on the Internet Protocol V ersion 4 (TCP/IPv4) . Figure 4-3 TCP/IP Setting 5) Choose Obt ain an IP address automatically , and Obt ain DNS server address automatically as shown in the figure below .
User ’s Man ual of WNRT -617 -25- Figure 4-4 Obtain an IP address automatically 4.1.2 Configure the IP Address Manually Summary: Set up the TCP/IP Protocol for your PC. Configure the network pa rame ters. The IP address is 192.16 8.1.xxx ("xxx" is any number from 2 to 254), Subnet Mask is 255.
User ’s Man ual of WNRT -617 -26- you can enter the DNS server IP address provided by your local ISP . Then click OK to save your settings. Figure 4-5 Use S tatic IP address Now , you can run the Ping command in the command prompt to verify the network conne ction between your PC and the Router .
User ’s Man ual of WNRT -617 -27- Figure 4-6 Windows 7 - Search box 3. Open a command prompt , and type ping 192.168.1.1 , and then press Enter . If the result displayed is similar to Figure 4-7 , it means the connection betwee n your PC and the Route r has been est ablished well.
User ’s Man ual of WNRT -617 -28- Figure 4-8 Failed result of Ping comm and If the address is 0.0.0.0, check y our adapter inst allation, secu rity settings, and the settings on your router . Some firewall sof tware programs may block a DHCP re quest on newly inst alled adapters.
User ’s Man ual of WNRT -617 -29- 4.2 S t arting Setup in W eb UI It is easy to configure and manage the WNR T -617 with web browser . Step 1. T o access the configuration utility , open a web-browser and enter the default IP address http://192.168.
User ’s Man ual of WNRT -617 -30- After entering the username and p assword, the main screen appears as Figure 4-1 1 . Figure 4-1 1 WNRT -617 Web UI Screenshot Step 2. After successfully login in, you can click the Quick Setup to quickly configure your Router .
User ’s Man ual of WNRT -617 -31- Figure 4-13 Quick Setup – W AN Connection T ype If the connection type detected is PPPoE , the next scre en will appear as sh own in Figure 4-14 . Enter the User Name and Pass w ord provided by your ISP. These fields are case-sen sitive.
User ’s Man ual of WNRT -617 -32- Figure 4-15 Quick Setup - S tatic IP If the connection type detected is Dy namic I P , the n ext screen will appear as shown in Figure 4-16 . Then you ca n go on with the wireless configurat ion. Figure 4-16 Quick Setup – MAC Clone Step 4.
User ’s Man ual of WNRT -617 -33- Figure 4-17 Quick Setup – Wireless.
User ’s Man ual of WNRT -617 -34- The page incl udes the following fields: Object Description Wireless Radio Enable or disable the wireless radio cho osing from the pull-down list.
User ’s Man ual of WNRT -617 -35- Chapter These settings are only for basic wirel ess parameters. For advanced setting s, please refer to 5.7 Wireless . Step 5. Click the Next button. Y ou will then see the Finish page. If you don’t make any change on the Wireless p age, you will see the Finish page as shown in Figure 4-18 .
User ’s Man ual of WNRT -617 -36- 4.3 PLANET Smart Setup! Utility Y ou can configure the Wireless Router by running the SMART SETUP! in the CD-ROM provid ed in the package. T o setup through the Smart Setup! program, insert the CD into your Windows XP / V ista / Win 7 PC and follow the instructions on the scree n.
User ’s Man ual of WNRT -617 -37- Figure 4-22 PLANET Smart Setup! Program screenshot.
User ’s Man ual of WNRT -617 -38- Chapter 5. Configuring the Router This chapter will show e ach Web p age's key functions and the configuration way . 5.1 Login After successfully login, you will see the fif teen main menus on the left of the W eb-based utility .
User ’s Man ual of WNRT -617 -39- Figure 5-2 Router S tatus 5.3 Quick Setup Please refer to Section 4.2: S t arting Setup in Web UI ..
User ’s Man ual of WNRT -617 -40- 5.4 Operation Mode Figure 5-3 Operation Mode The page incl udes the following fields: Object Description Client Router In this mode, the device enables multiusers to share Internet from WISP . The LAN port devices share the same IP from WISP through Wireless port.
User ’s Man ual of WNRT -617 -41- Bridge with AP In this mode, the device can be used to combine multiple local networks together to the same one via wireless conn ections, especially for a home or of fice where sep arated networks can't be connected easily together with a cable.
User ’s Man ual of WNRT -617 -42- 5.5 WPS This section will guide you to add a new wirele ss device quickly to an existing network by WPS (Wi-Fi Protected Setup) function. Step 1. Choose menu “ WPS ”, you will see the next screen (shown in Figure 5-4 ).
User ’s Man ual of WNRT -617 -43- To build a successful connection by WPS, you should al so do the corresponding configuration of the new device for WPS function.
User ’s Man ual of WNRT -617 -44- Step 2: Press and hold the WPS Button equipped on the adapte r directly for 2 or 3 secon ds. Or you can click the WPS button with the same function in t he configuration utility of the adapter . Step 3: W ait for a while until t he next screen appea rs.
User ’s Man ual of WNRT -617 -45- Method T w o: Enter the PIN of the Router into the configuration utility of your Wirele ss adapter Step 1: Get the Current PIN code of the Router i n Figure 5-4 (each Route r has it s unique PIN code).
User ’s Man ual of WNRT -617 -46- 5.6 Network There are three submenus under the Network menu (shown in Figure 5-9 ): WA N , LAN , and MAC Clone . Click any of them, and you will be able to configure the corresp onding function. Figure 5-9 The Network menu 5.
User ’s Man ual of WNRT -617 -47- Figure 5-10 W AN - Dynamic IP This page displays the W AN IP p arameters assigne d dynamically by your ISP , including IP ad dress, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from y our ISP .
User ’s Man ual of WNRT -617 -48- If you get “Address not found” error wh en you ac cess a W ebsite, it is likely that your DNS servers are set u p improperly . Y ou should cont act your ISP to get the correct DNS server address. St atic IP 2.
User ’s Man ual of WNRT -617 -49- default MTU Size unless required by your ISP . Primary/Secondary DNS (Optional) Enter one or two DNS addresses in dotted-decim al notation provided by your ISP . PPPoE / Russia PPPoE 3. If your ISP provides a PPPoE / Russia PPPoE connection, select PPPoE/Russia PPPoE option.
User ’s Man ual of WNRT -617 -50- The page incl udes the following fields: Object Description User Name/Pass word Enter the User Name and Password provided by your ISP . These fields are case-sensitive. Disabled The Secondary Conne ction is disabl ed by default, so there is PPPoE connection only.
User ’s Man ual of WNRT -617 -51- Figure 5-13 PPPoE Advanced Settings The page incl udes the following fields: Object Description MTU Size The default MTU size is “1480” bytes, whi ch is usually fine. It is not recommended that you change th e default MTU Size unless requ ired by your ISP .
User ’s Man ual of WNRT -617 -52- BigPond Cable 4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, plea se select BigPond Cable .
User ’s Man ual of WNRT -617 -53- change the default MTU Size unless req uired by your ISP . Connect on Demand In this mode, the Internet connect ion can be termin ated automatically after a specified inactivity period ( Max Idle T ime ) and be re-establi shed when you attempt to access the Internet again.
User ’s Man ual of WNRT -617 -54- L2TP / Russia L2TP 5. If your ISP provides L2TP / Russia L2T P connection, please select L2TP/Russia L2TP option.
User ’s Man ual of WNRT -617 -55- wish to activate Connect on Demand , click the radio button. If you want your Internet connection to rema in active at all times, enter 0 in the Max Idle Time field. Otherwi se, enter the number of minutes you want to have elapse d before your Internet connection terminates.
User ’s Man ual of WNRT -617 -56- PPTP / Russia PPTP 6. If your ISP provid es PPTP / Russia PPTP connection, please select PPTP/Russia PPTP option.
User ’s Man ual of WNRT -617 -57- Internet connection ha s been terminated due to inacti vity , Connect on Demand enables the Router to automatically re-est ablish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand , click the radio button.
User ’s Man ual of WNRT -617 -58- Figure 5-17 LAN Settings The page incl udes the following fields: Object Description MAC Address The physical address of the Ro uter , as seen from the LAN. The value can't be changed. IP Addres s Enter the IP address of your Router or reset it in dotted-deci mal notation (factory default: 192.
User ’s Man ual of WNRT -617 -59- 5.6.3 MAC Clone Choose m enu “ Network → MAC Clo ne ”, you can configure the MAC add ress of the W AN on the screen b elow ( Figure 5-18 ). Figure 5-18 MAC Addre ss Clone Some ISPs require that you register the MAC Addr ess of your adapter .
User ’s Man ual of WNRT -617 -60- 5.7 Wireless There are five submenus under the Wireless menu (shown in Figure 5-19 ): Wireless Settings , Wireless Security , Wireless MAC Filtering, Wireless Advanced and Wireless St atistics. Click any of them, and you will be able to configure the corresp onding function.
User ’s Man ual of WNRT -617 -61- The page incl udes the following fields: Object Description Wireless Network Name (SSID) Enter a value of up to 32 characters. The same na me of SSID (Service Set Identification) must be assigned t o all wireless devices in your network.
User ’s Man ual of WNRT -617 -62- Max Tx Rate Y ou can limit the maximum tx rate of the Router through this field. Enable Wireless Router Radio The wireless radio of this Router can be enabled or disabled to allow wireless st ations access.
User ’s Man ual of WNRT -617 -63- BSSID(to be bridged) The BSSID of the AP your Router is going to connect to as a clie nt. You can also use the search func tion to select the BSSID to join. Search Click this button, you can search the AP whi ch runs in the current channel.
User ’s Man ual of WNRT -617 -64- Figure 5-22 Wireless Security - None The page incl udes the following fields: Object Description Disable Security If you do not want to use wirel ess secu rity, select this check box, but it’s strongly recommended to choose one of the following mod es to enable security.
User ’s Man ual of WNRT -617 -65- Object Description WEP It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 5-23 . Typ e you can choose the type for the WEP security on the pull-down list.
User ’s Man ual of WNRT -617 -66- Figure 5-24 Wirele ss Security - WP A/WP A2 Enterprise The page incl udes the following fields: Object Description WPA/WPA2 It is based on Radius Server. Ve r s i o n you can choose the version of the WPA security on the pull-down list.
User ’s Man ual of WNRT -617 -67- Figure 5-25 Wirele ss Security - WP A/WP A2 Personal The page incl udes the following fields: Object Description WP A-PSK/WP A2-PSK It’s the WPA/WPA2 authenticati on type based on pre-sh ared passphrase. Ve r s i o n you can choose the version of the WPA-PSK security on the drop-down list.
User ’s Man ual of WNRT -617 -68- 5.7.3 Wireless MAC Filtering Choose menu “ Wireless → MAC Filtering ”, you can control the wireless access by configuring the Wireless MAC Address Filtering function, shown in Figure 5-26 . Figure 5-26 Wirele ss MAC Address Filtering T o filter wireless use rs by MAC Address, click Enable .
User ’s Man ual of WNRT -617 -69- Figure 5-27 Add or Modi fy Wireless MAC Address Filtering entry T o add or modify a MAC Address Filter ing entry , follow these instructions: Step 1. Ente r the appro priate MAC Addr ess into the MAC Address field. The form at of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
User ’s Man ual of WNRT -617 -70- For example: If you desire that the wireless station A with MAC address 0 0-30-4F-11-22-3 3 and the wireless station B with MAC address 00-30-4F-1A-2B- 3C are able .
User ’s Man ual of WNRT -617 -71- 5.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and you can configure the advanced settings of you r wireless network. Figure 5-29 Wireless Advanced The page incl udes the following fields: Object Description T ransmit Power Here you can specify the transmit power of Route r .
User ’s Man ual of WNRT -617 -72- setting and is recommended. DTIM Interval This value determines the interval of the Delivery T raffic Indication Message (DTIM). A DTIM field is a countdown field inf orming client s of the next window for listening to bro adcast and multicast message s.
User ’s Man ual of WNRT -617 -73- 5.7.5 Wireless Statistics Choose menu “ Wireless → Wireless S t atistics ”, and you can see the MAC Address, Current S tatus, Received Packets a nd Sent Packets for each connected wireless st ation.
User ’s Man ual of WNRT -617 -74- 5.8 DHCP There are three submenus under the DHCP menu (shown in Figure 5-31 ): DHCP Settings , DHCP Client s List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.
User ’s Man ual of WNRT -617 -75- The page incl udes the following fields: Object Description DHCP Server Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within y our network or else you must configure the computer manually .
User ’s Man ual of WNRT -617 -76- Figure 5-33 DHCP Clients List The page incl udes the following fields: Object Description ID The index of the DHCP Cli ent Client Name The name of the DHCP client MAC Address The MAC address of the DHCP client Assigned IP The IP addre ss that the Router ha s allocated to the DHCP client.
User ’s Man ual of WNRT -617 -77- Figure 5-34 Addre ss Reservation The page incl udes the following fields: Object Description MAC Address The MAC address of the PC for whi c h you want to reserve IP addre ss. Assigned IP Address The IP address of the Router reserved.
User ’s Man ual of WNRT -617 -78- T o modify or delete an existing entry: Step 1. Click the Modify in the entry you want to modify . If y ou want to delete the entry , click the Delete . Step 2. Modify the information. Step 3. Click the Save button.
User ’s Man ual of WNRT -617 -79- 5.10 Forwarding There are four submenus under t he Forwarding menu (shown in Figure 5-37 ): Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function.
User ’s Man ual of WNRT -617 -80- service ports (in XXX – YYY format, XXX is the start port number , YYY is the end port number). IP Addres s The IP Address of the PC prov iding the service application. Protocol The protocol used for this application, eit her TCP , UDP , or All (all protocols supported by the Router).
User ’s Man ual of WNRT -617 -81- T o modify or delete an existing entry: Step 1. Click the Modify in the entry you want to modify . If y ou want to delete the entry , click the Delete . Step 2. Modify the information. Step 3. Click the Save button.
User ’s Man ual of WNRT -617 -82- 5.10.2 Port Triggering Choose menu “ Forwarding → Port T riggering ”, and you can view and add port triggering in the next screen (s hown in Figure 5-40 ). Some applications require multiple connections, like Internet game s, video confe rencing, Internet calling and so on.
User ’s Man ual of WNRT -617 -83- 2000-2038, 2050-2051, 2 085, 3010-3030. Incoming Protocol The protocol used for Incoming Port s Range, either TCP or UDP , or ALL (all protocols supported by the Router). Stat u s The status of this entry either Enabled or Disabled .
User ’s Man ual of WNRT -617 -84- 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disa bled. Click the Delete All button to delete all entries 1) When the trigger connection is released, the related opening port s will be closed.
User ’s Man ual of WNRT -617 -85- Step 3. Click the Save button. After you set the DMZ host, the firewall related to the host will not work. 5.10.4 UPnP Choose menu “ Forwarding → UPnP ”, and you can view the information ab out UPnP (Universal Plug and Play) in the screen (shown in Figure 5-43 ).
User ’s Man ual of WNRT -617 -86- Protocol - Shows which type of protocol is opened. Internal Port - Internal port, which the router opened for local host. IP Address - The UPnP device that is currently accessing the router. Sta t us - The port’s status displaye d here.
User ’s Man ual of WNRT -617 -87- Figure 5-45 Basic Security The page incl udes the following fields: Object Description Firewall A firewall protects your network from the outside world.
User ’s Man ual of WNRT -617 -88- Router, keep the default, Enabled . L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the method used to enable Point-to-Point se ssions via the Internet on the Layer 2 level. To allow L2TP tunnels to pa ss through the Router, keep the default, Enabled .
User ’s Man ual of WNRT -617 -89- Figure 5-46 Advanced S ecurity The page incl udes the following fields: Object Description Packets Statistics Interval (5~60) The default value is 10. Select a value between 5 and 60 se conds from the drop-down list.
User ’s Man ual of WNRT -617 -90- Threshold (5~3600) Router will startup the blocking function i mmediately . Enable UDP-FLOOD Filtering Enable or Disable the UDP-FLOOD Filte ring. UDP-FLOOD Packets Threshold (5~3600) The default value is 500. Enter a value between 5 ~ 3600.
User ’s Man ual of WNRT -617 -91- Figure 5-47 Local Ma nagement By default, the radio button “ All the PCs on the LAN are allo wed to access the Router's Web-Based Utility ” is checked.
User ’s Man ual of WNRT -617 -92- 5.11.4 Remote Management Choose menu “ Security → Remote Management ”, and you can configure the Remote Management function in the screen as shown in Figure 5-48 . This feature allo ws you to manage your Ro uter from a remote location via the Internet.
User ’s Man ual of WNRT -617 -93- 5.12 Parental Control Choose menu “ Parent al Control ”, and you can configure the p arent al co ntrol in the screen as shown in Figure 5-49 .
User ’s Man ual of WNRT -617 -94- For detailed i nformation, please go to “ Access Control → Schedule ”. Modify Here you can edit or delete an existing entry. To add a new entry, please follo w the steps below. Step 1. Click the Add Ne w … button and the next screen will pop-up as shown in Figure 5-49 .
User ’s Man ual of WNRT -617 -95- Figure 5-50 Add or Modify Parental Control Entry For example : If you desire that the child PC with MA C address 00-11 -22-33-44-AA can access www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is without any restriction, you sh ould follow the settings below.
User ’s Man ual of WNRT -617 -96- Enter “www.google.com” in the Allo wed Domain Name field. Select “Schedule_1” you create just no w from the Effective Time drop-down list. In Status field, select Enable. Step 4. Click Save to complete the settings.
User ’s Man ual of WNRT -617 -97- 5.13 Access Control There are four submenus under the Access Contro l menu as shown in Figure 5-52 : Rule , Host , Ta r g e t and Schedule . Click any of them, and you will be able to configure the corresponding functio n.
User ’s Man ual of WNRT -617 -98- Object Description Enable Internet Acc ess Control Select the check box to enable the In ternet Access Control function, so the Default Filter Policy can take effect. Rule Name Here displays the name of the rule and this name is unique.
User ’s Man ual of WNRT -617 -99- in the first box you want to move and another ID number in se cond box you want to move to, and then click the Move button to change the entry’s order. Click the Next button to go to the next page, or click the Previous button return to the previous page.
User ’s Man ual of WNRT -617 -100- In Host field, select Host_1. In Target field, select Target_1. In Schedule field, select Schedule_1. In Action field, select Allow. In Status field, select Enable. Click Save to complete the settings. Then you will go back to the Access Co ntrol Rule Management page and see the following list.
User ’s Man ual of WNRT -617 -101- 5.13.2 Host Choose menu “ Access Control → Host ”, and you can view and set a Host list in the screen as shown in Figure 5-56 .
User ’s Man ual of WNRT -617 -102- Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page.
User ’s Man ual of WNRT -617 -103- Figure 5-59 Host Settings List 5.13.3 Target Choose menu “ Access Control → Ta r g e t ”, and you can view and set a T arget list in the screen as shown in Figure 5-60 . The target list is necessary for the Access Control Rule.
User ’s Man ual of WNRT -617 -104- To add a new entry, please follo w the steps below. Step 1. Click the Add New … button. Step 2. In Mode field, select IP Ad d ress or Domain N ame. If you select IP Address , the screen shown i s Figure 5-61 . 1.
User ’s Man ual of WNRT -617 -105- Figure 5-62 Add or Modify an Access T arget Entry For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.go ogle.com only, you should first follow the settings below: Step 1.
User ’s Man ual of WNRT -617 -106- Figure 5-63 Target Settings Li st 5.13.4 Schedule Choose menu “ Access Control → Schedule ”, and you can view and set a Schedule list in the next screen as shown in Figure 5-64 . The Sche dule list is necessary for the Access Control Rule.
User ’s Man ual of WNRT -617 -107- To add a new schedule, follo w the steps belo w . Step 1. Click Add New ... button shown in Figur e 5-64 and the next screen will pop -up as shown in Figure 5-65 . Step 2. In Schedule Description field, create a unique description for the schedule (e.
User ’s Man ual of WNRT -617 -108- Step 1. Click Add Ne w... button shown in Figure 5-66 to enter the Advanced Sche dule Settings page. Step 2. In Schedule Description field, create a unique description for the schedul e (e.g. Schedule_1). Step 3. In Day field, check the Sele ct Days radio button and then select Sat and Sun.
User ’s Man ual of WNRT -617 -109- in Figure 5-68 ). A static route is a pre-determin ed path that network information must travel to reach a specific host or network. Figure 5-68 S tatic Routing T o add static routing en tries: Step 1. Click Add New… shown in Figure 5-69 , you will see the following screen.
User ’s Man ual of WNRT -617 -1 10- Stat u s Select Enabled or Disabled for this ent ry on the Status pull-down list. Step 3. Click the Save button to make the entry take effect. Other configurations for the en tries: Click the Delete button to delete the entry .
User ’s Man ual of WNRT -617 -1 1 1- 5.15 Bandwidth Control There are two submenus unde r the Bandwidth Cont rol menu as shown in Figure 5-71 . Click a ny of them, and you will be able to config ure the corresponding function. The d etailed explanation s for each submenu are provided belo w .
User ’s Man ual of WNRT -617 -1 12- Ingress Bandwidth The download speed thro ugh the W AN port. 5.15.2 Rules List Choose menu “ Bandwid th Control → Rules List ”, you can view and configure the Bandwidth Control rules in the screen below .
User ’s Man ual of WNRT -617 -1 13- Figure 5-74 Bandwi dth Control Rule Settings Step 3: Click the Save button. 5.16 IP & MAC Binding There are two submenus under the IP &MAC Binding menu (shown in Figure 5-75 ): Binding Settings and ARP List .
User ’s Man ual of WNRT -617 -1 14- Figure 5-76 Binding Setting The p age include s the following fields: Object Description MAC Address The MAC address of the contro lle d computer in the LAN. IP Address The assigned IP address of the c ontrolled computer in the LAN.
User ’s Man ual of WNRT -617 -1 15- Figure 5-77 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Binding entries, follo w the steps below. Step 1. Click the Add New ... button as shown in Figure 5-76 . Step 2. Enter the MAC Addres s and IP Address.
User ’s Man ual of WNRT -617 -1 16- Figure 5-78 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries.
User ’s Man ual of WNRT -617 -1 17- The page incl udes the following fields: Object Description MAC Address The MAC address of the contro lle d computer in the LAN. IP Address The assigned IP address of the c ontrolled computer in the LAN. Status Indicates whether or not the MAC and I P addresses are bo und.
User ’s Man ual of WNRT -617 -1 18- 5.17 Dynamic DNS Choose menu “ Dynamic DNS ”, and you can configure the Dynam ic DNS function. The Router offers the DDNS (Dyna mic Domain Name System) feat u.
User ’s Man ual of WNRT -617 -1 19- To set up for DDNS, follow these instructions: Step 1. T ype the Domain Name received from your dynamic DNS service provider . Step 2. T ype the User Name for your DDNS account. Step 3. T ype the Passw ord for your DDNS account.
User ’s Man ual of WNRT -617 -120- Step 3. T ype the Domain Name you received from dynamic DNS service provider here. Step 4. Click the Login button to log in to the DDNS service. Connection Status - The status of the DDNS servic e conne ction is displayed here.
User ’s Man ual of WNRT -617 -121- 5.17.4 Planetddns.com DDNS First of all, please go to http://www .planetddns.com to register a Planet DDNS account, an d refer to the F AQ ( http://www .planetddn s.com/index.php/faq ) for how to register a free account.
User ’s Man ual of WNRT -617 -122- Figure 5-84 Planet ddns.com DDNS Settings To set up for DDNS, follow these instructions: Step 1. T ype the User Name for your DDNS account. Step 2. T ype the Passw ord for your DDNS account. Step 3. T ype the Domain Name you received from dynamic DNS service provider .
User ’s Man ual of WNRT -617 -123- 5.18 System T ools Choose menu “ System T ools ”, and you can see the submenus under the main menu: T ime Settings , Diagnostic , Firmware Upgrade , Factory Default s, Backup & Restore, Reboot, Password, System Log and S t atistics.
User ’s Man ual of WNRT -617 -124- The page incl udes the following fields: Object Description Time Zone Select your local time zone from this pull down li st. Date Enter your local date in MM/DD/YY into the right blanks. Tim e Enter your local time in HH/MM/SS into the right blanks.
User ’s Man ual of WNRT -617 -125- 5.18.2 Diagnostic Choose menu “ System T ools → Diagnostic ”, and you can transact Ping or T raceroute function to check connectivity of your network in th e following screen.
User ’s Man ual of WNRT -617 -126- Pings Count The number of Ping p ackets for a Ping conne ction. Ping Packet Size The size of Ping packet. Ping Timeout Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is ov ertime.
User ’s Man ual of WNRT -617 -127- 5.18.3 Firmw are Upgrade Choose menu “ System T ools → Firmware Upgrade ”, and you can update the latest version of firmware for the Router on the following screen.
User ’s Man ual of WNRT -617 -128- 5.18.4 Factory Defaults Choose menu “ System T ools → Factory Default s ”, and you can restore the configurations of the Router to factory default s on the following screen Figure 5-91 Restore Factory Default Click the Restore button to reset all configuration settings to their d efault values.
User ’s Man ual of WNRT -617 -129- 5.18.5 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and you can save the current config uration of the Router as a backup file and restore the configuration vi a a backup file as shown in Figure 5-92 .
User ’s Man ual of WNRT -617 -130- Change the LAN IP Address (syste m will reboot automatically). Change the DHCP Settings. Change the Wireless conf igurations. Change the Web Manage ment Port. Upgrade the firmware of the Router (system will reboot automatically).
User ’s Man ual of WNRT -617 -131- Click the Save button when finished. Click the Clear All button to clear all. 5.18.8 System Log Choose menu “ System T ools → System Log ”, and you can view the logs of the Router.
User ’s Man ual of WNRT -617 -132- Figure 5-96 Mail Ac count Settings The page incl udes the following fields: Object Description From Your mail box address. The Router would connect it to send logs. To Recipient’s addres s. The destination mailbox where the logs wo uld be received.
User ’s Man ual of WNRT -617 -133- Only when you select Authentication, you have to enter the User Na me and Password in the following fields. Figure 5-97 Mail Account Settings - Authentication Click Save to keep your settings. Click Back to return to the previous page.
User ’s Man ual of WNRT -617 -134- 5.18.9 Statistics Choose menu “ System T ools → St atistics ”, and you can view the statistics o f the Router, including total traffic and current traffic of the last Packets Statistic Interval.
User ’s Man ual of WNRT -617 -135- Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total number of packets receiv ed an d transmitted by the Router. Total Bytes The total number of bytes received and transmitted by the Router.
User ’s Man ual of WNRT -617 -136- Chapter 6. Quick Connection to a Wireless Network 6.1 Windows XP (Wireless Zero Configuration) Ste p 1 : Right-Click on the wireless network icon di splayed in the.
User ’s Man ual of WNRT -617 -137- Ste p 4 : Enter the encryption key of the Wirele ss Router (1) The Wireless Network Connection box will appear (2) Enter the encryption key that is configured in Section 5.
User ’s Man ual of WNRT -617 -138- Some laptops a re equipped with a “Wireless ON/ OFF” switch for the intern al wireless LAN. Make sure the hardwa re wireless switch is swit ch to “ON” positi on. 6.2 Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 th at can be use d to detect and connect to wireless network.
User ’s Man ual of WNRT -617 -139- If you will be connecting to this Wireless Route r in the future, check [ Connect automatically ]. Ste p 4 : Enter the encryption key of the Wirele ss Router (1) The Connect to a Network box will appear (2) Enter the encryption key that is configured in Section 5.
User ’s Man ual of WNRT -617 -140- Figure 6-9 WLAN AutoConfig – Connected.
User ’s Man ual of WNRT -617 -141- 6.3 Mac OS X 10.x .3 Mac OS X 10.x Ste p 1 : Right-Click on the network icon displayed in the system tray The AirPort Network C onnection menu will appear Figure 6.
User ’s Man ual of WNRT -617 -142- Figure 6-12 The AirPort Network Connectio n – enter password If you will connect this Wireless Router in the future, check [ Remember this network ]. Ste p 5 : Check if the AirPort is connected to the selected wireless network.
User ’s Man ual of WNRT -617 -143- 6.4 iPhone / iPod T ouch / iPad .4 iPhone / iPod T ouch / iPad Ste p 1 : T ap the [ Settings ] icon displayed in the home screen Figure 6-14 The Wi-Fi Settings in .
User ’s Man ual of WNRT -617 -144- Figure 6-16 General Settings – Not Connected Ste p 3 : T ap the target wireless network (SSID) in “ Choose a Network… ” (1) Turn on Wi-Fi by tapping “ Wi.
User ’s Man ual of WNRT -617 -145- Figure 6-18 General Settings – Enter password Ste p 5 : Check if the iDevice is connected to the sele cted wireless network.
User ’s Man ual of WNRT -617 -146- Appendix A: FAQ 1. How do I configure the Router to ac cess Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the W AN port on the Router .
User ’s Man ual of WNRT -617 -147- 1. Sometimes the connection cannot be discon nected although you specify a time to Max Idle T ime, since some applicant s are visiting the Internet continually in the background. 2. If you are a Cable user , please co nfigure the Rout er following the above steps.
User ’s Man ual of WNRT -617 -148- “Service Port” blank, and your IP address for the “IP Address” blank, taking 1 92.168.1.169 for an example, remember to Enable and Save .
User ’s Man ual of WNRT -617 -149- type your IP address int o the “DMZ Host IP Address” field, us ing 192.168.1.169 as an example, remember to click the Save button. Figure A-5 D M Z 5) How to enable H323 ALG: Log in to the Router , click the “ Security ” menu on the left of your browser , and click “ Basic Security ” submenu.
User ’s Man ual of WNRT -617 -150- Figure A-6 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will i nte rfere with the WEB management port 80 on the Router , you must change the WEB management port number to avoid interfe rence.
User ’s Man ual of WNRT -617 -151- Figure A-7 Remote Management If the above configuration takes ef fect, y ou can configure the Router by typing http://192.168.1.1:88 (the Router ’s LAN IP address: Web Manage ment Port) in the address field of the W eb browser .
User ’s Man ual of WNRT -617 -152- Figure A-9 Add or Modify a V irtual Server Entry 5. The wireless st ations cannot be connected to the Router . 1) Make sure the " Wireless Router Radi o " is enabled. 2) Make sure that the wireless st ations' SSID is in accord with the Router's SSID.
User ’s Man ual of WNRT -617 -153- Appendix B: Configuring the PCs In this section, we’ll introduce how to inst all and configure the TCP/IP correct ly in Windows XP . First make sure your Ethernet Adapter is working, refer to the adapter ’s manual if needed.
User ’s Man ual of WNRT -617 -154- Figure B-2 TCP/IP Settings 5) The following TCP/IP Prop erties window will display and the IP Address tab is open on this window by default.
User ’s Man ual of WNRT -617 -155- Figure B-3 TCP/IP – Obt ain an IP address automatically Setting IP ad dress manually 1 Select Use the following IP address radio button. 2 If the Router's LAN IP address i s 192.168.1.1, ty pe in IP address 192.
User ’s Man ual of WNRT -617 -156- Figure B-4 TCP/IP Settings – S tatic IP Now click OK to keep your setting s..
User ’s Man ual of WNRT -617 -157- Appendix C: Specifications Product WNRT -617 150Mbps 802.1 1n Wireless Broadband Router Hardware Specifications WA N Port : 1 x 10/100M bps Auto MDI/MDI - X RJ45 p.
User ’s Man ual of WNRT -617 -158- WEP ( 64/128/152-bit ) encryption secu rity Encryption Security WP A-PSK / WP A2-PSK (TKIP/AES) WP A / WP A2 (TKIP/AES) WP A / WP A2 enterprise mode (802.
User ’s Man ual of WNRT -617 -159- Windows XP Mac OS X 10.4 and higher St andards Conformance IEEE St andards IEEE 802.1 1n (1T 1R, up to 150Mbps) IEEE 802.
User ’s Man ual of WNRT -617 -160- Appendix D: Glossary 802.11n - 802.11n builds upon previou s 802.11 standar ds by adding MIMO (multiple-input multiple-output).
User ’s Man ual of WNRT -617 -161- SSID - A S ervic e S et Id entification is a thirty-two character (ma ximum) alphanume ric key identifying a wireless local area network. For the wirel ess devices in a network to communicate with ea ch other, all devices must be configured with the same SSID.
EC Declaration of Conformity For the following equipment: *T ype of Product: 150Mbps 802.1 1n W ireless Broadband Router *Model Number: WNR T -617 * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 10F ., No.96, Minquan Rd.
User ’s Man ual of WNRT -617 -162- EC Declaration of Conformity English Hereby , PLANET T echnolog y Corporation, declares that this 802.1 1n Wireless Broa dband Router is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Planet WNRT-617 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Planet WNRT-617 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Planet WNRT-617 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Planet WNRT-617 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Planet WNRT-617, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Planet WNRT-617.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Planet WNRT-617. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Planet WNRT-617 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
