Manuale d’uso / di manutenzione del prodotto VIP-154PT del fabbricante Planet Technology
Vai alla pagina of 66
SIP IP Phone VIP-154T/VIP-154PT/VIP-154NT User’s manual Version 2.2 1.
Copyright Copyright (C) 2008 PLANET T echnology Corp. All rights reserved. The products and programs described in this User ’s Manu al are licensed products of PLANET T echnology , This User ’s Ma.
3 Revision User ’s Manual for PLANET SIP IP Phone: Model: VIP-154T/VIP-154PT/VIP-154NT Rev: 2.2 (2008, February) Part No. EM-VIP154V2.2.
4 T ABL E OF CONTENTS Chapter 1 ................................................................................................ 6 Introduction ............................................................................................ 6 Overview ...
5 Port Settings .............................................................................................................. 36 Codec Settings ..........................................................................................................
6 Chapter 1 1 Introduction Overview Meeting the next-generation Internet telephony service demands, PLANET Te chnolo gy provides feature-rich, toll-quality Internet telepho ny service solutions. The built-in PSTN i nterface provides user more convenience between IP Phone and PSTN call sele ction s.
7 Configuration of the IP Phone can be p erform ed in minutes via the LCD menu keypad, telnet, or web interfaces. Using the built-in LCD di splay, the IP Phone offers use r-fri endly configuration guidelines, machine operat ion status, call status displays, and incoming call id en tification.
Package Content The contents of your product should con t ain the following items: VoIP IP Phone Power adapter Quick Installation Guide User’s Manual CD RJ-11 cable x 1 Physical Det ails The following figure illustra tes the front/rear pa nel of IP Phone.
Rear Panel of VIP-154NT 1 RESET Reset to the factory default setting 2 PC RJ-45 connector, to maintain t he existi ng network structure, connected directly to the PC through straight CAT-5 cable 3 LAN RJ-45 connector, for Internet a ccess, connected directly to Sw it ch /H ub through straight CAT-5 cable.
Front View and Keypad function Keypad Description 1 LCD Display Menu and all status shall be displ ayed for users. 2 Speed Dial M1~M4 To make a speed di al call by pressing the speed dial key M1 ~ M4. 3 MENU To bring out the menu selection while IP Phone is in idle state.
11 9 TRANSFER To transfer an active call (incoming call answered or outgoing call accepted) to another device s. 10 CONF Press this button can make conference function. 11 FWD To carry out forward function. 12 DEL/MUTE Press to delete digits when at configuration m ode or input phone numbers.
2 Chapter 2 Prep arations & Inst allation Physical Inst allation Requirement This chapter illustrates ba sic installation of IP Phone • Network cables. Use standard 10/1 00Ba seT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs.
L Note In order to connect machine for administration, please locate your PC in the same network segme nt (192.168.0.x) of IP Phone. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations.
After confirmi ng the modifi cation you’ve done, Please click on the Submit button to apply settings and browse to “ Save & Reboot ” menu to reboot the machine to make the settings e f fective. Connection Ty pe Data required. Fixed IP In most circumstances, it is no need to configure the DHCP settings.
3 Chapter 3 Network Service Configurations Configuring and monitoring your IP Phone from web browser The IP Phone integrate s a web-based graphical user interface that can cover mo st configurations and machine st atu s monitoring. Via st andard, web browser , you can configu re and check machine status from anywhe re around the world.
IP Phone main page 16.
Chapter 4 V oIP T elephone Adapter Configurations 17 Phone Book settings IP Phone can set up 140 records of Phone Book. User can make calls via Phone Book feature of IP Phone. Field Description Phone Book Page The default is Page 1. It can select Page1 ~ Page 14 to look round Phone Book record s.
If you need to add a phone number into the Phone Book list, you need to input the positio n, the name, and the phone number (by URL type). When you finished a new phone list, just click the “Add Phone” button. If you want to delete a phone number , you can sele ct the phone number you want to delete then click “Delete Selected” button.
202 192.168.1.2:5062 STEP 4: Pick up the telephone handset or pre ss Handfree button to dial to this telephone. IP Dialing.. 1 192.168.1.2:5062 Speed Dial settings In S peed Dial setting functi on you ca n add/delete S peed Dial number . Y ou can input maximum 10 entries speed dial list.
Call Forward This page defines Call Forward function. Y ou can se tup the phone numbe r you want to forward in this page. There are three type of Forward mode. Y ou can choose All Forward, Busy Forward, and No Answer Forward by click the icon. All Forward : All incoming call will forwa rd to the number you chosen.
Call Forward function for VIP-154T/VIP-154PT Call Forward to PSTN (VIP-154NT): VIP-154 NT not only supp ort Call Forward to IP calls, but also can forward the calls to PSTN. Y ou can choose the Ca ll Forward type with PSTN, then input the name and the PSTN number in URL/Number field.
When you finished the setting, please cli ck the Su bmit button. Volume Setting This page defines the Han dset V olume, Ringer V olume, and the Handset Gain. When you finished the setting, please click the Submit button. Handset V olume is to set the volume for you can hear from the handset.
PSTN-Out V olume is to set the volume for you can hear from the PSTN line. PSTN-In Gain is to set the volume send out to the other PSTN side’s haneset. V olume Settings for VIP-154NT Ringer Setting This page defines the u se r can set the tinkle of bel ls whe n someone ring your IP Phone.
time is large than the “T o” time, the Block time will from Day 1 to Day 2. When you finished the setting, please cli ck the Su bmit button. Auto Answer settings (For VIP-154NT) This page defines the Auto Answer function. Y ou can set the Auto Answer function to answer t he incoming call by the phone.
25 Field Description Drop Prefix The rule of add or replace code. If setup as No, it will add the prefix number prior to the identification numbe r . If setup as Y es, it will replace the identification number . Replace rule The prefix number . It only accept the numeral and the max length is 8.
when receive the [#] key . The syst em also will to determine the Auto Dial T ime, it will carry out the calling if there isn’t receive the digit af ter the Auto Dial T ime. If setup as No, the system just according to the Auto Dial T ime to determine the end time.
Routing to: It can select IP or FXO for the auto rout ing function. M achine will according to the Routing rule to dial out by IP or FXO method. Routing rule: The Routing rule feature has drop number function, and it can use “+” to sepa rate for many routing rules.
Voice Mail Settings This page defines the voice mail key function. When device register to IP PBX and it support V oice Mail System. It can set up the voice mail number in advanced, and press the “MESSAGE” button from keypad. It will enter for voice mail system.
Alarm Settings This page defines the Alarm setting in this page. It provides the alarm function, and it can set up the Alarm T ime t o get the telephon e ring ed up every day . Alarm: The d efault is Off. If set up as On, the telephone will ringed up at the specific time.
PC Settings This page defines the PC setting in this p age. IP: The IP address of PC port. (In the Bridge mode, the Default IP : 192.168.0.1) Mask: The sub net address. ( Default : 255.255.255.0) MAC: The MAC of PC port DHCP Serv er: It will allot the IP address automati cally when enabke this function.
DDNS Settings This page defines the DDNS setting in this p age. Y ou need to have the DDNS account and input the informations properly . Y ou can have a DDNS acc ount with a public IP address then others can call you via the DDNS account. But now most of the V o IP appl ications are work with a SIP Proxy Server .
VLAN Settings This page defines the VLA N setting in this page. This function n eed s to co-operate with network devices which have VLAN function. VLAN Packet s: If setup a s On, it could receive VLA N messages. VID (802.1Q/T AG): Dispose VLAN ID is add a T ag header after realize enable th e VLAN functi on.
Virtual Server This page def ines the Virtual Server setti ng in this page. Y ou could define 24 virtual service information in this page. When you finishe d the se tting, please cli ck the Submit button. Virtual Serv er Page: There are total p age1 to page 3.
PPTP Settings This page defines the PPT P setting in this page. Y ou could setup the PPTP Server conne ctio n information. When you finished the se tting, please click the Su bmit button.
Service Domain Settings This router comes with the built-in firewal l based on the advanced technology of S tateful Packet In Service Domain Function you need to input the a ccount and the related informations in thi s p age, please refer to your ISP provider .
2* : Realm 2 3* : Realm 3 For example: The default is realm 1, inpu t the 2* (Follow by the # key) from keypad and hang u p the telephone set. It will switch to realm 2, and it can make the SIP calls via realm 2. Port Settings This page defines the SIP and RTP port number in th is p a ge.
Codec ID Setting This page defines the Cod ec ID. Sometimes 2 V oIP device with diff erent Code c ID will cause the interopability issue. If you are t al k ing with others got some problems , you may ask the other one what kind of Codec ID he use then you can change your C odec ID.
DTMF Settings This page def ines the DTMF parameters. Yyou can setup the InBand DTMF , 2833 Out-Band DTMF and Send DTMF SIP Info Enable/Disable in this p age. T o change this setting, please followin g your ISP information. When you finished the se tting, please click the Su bmit button.
others Internet devices. SIP Expire T ime: T o setup the registration interval time. Use DNS SRV : The default is disable, and use DNS SR V mode. Set enable to use DNS to SRV mode to search the host information. Send Keep Alives Pcaket: T o deliver the packet s on a regular time schedul e to keep NA T port could open continued.
Auto Configuration This page def ines the Auto Configuration (Auto Provision) setting. IP Phone support s TFTP , FTP , HTTP and IP PBX auto configuration function i n total. In IP PBX Auto Configuration Setting you need to check with your service provider if they have provided this function.
symptom. MAC CIone Setting This page defines the MA C Clone Enable/Disable. This function will copy the MAC address from NIC (Network Interface Card ) which pl aced in PC to LAN p ort of IP Phone. That because some ISP will limit the MAC address for PPPoE dial-up co nne ction.
2. Please make sure the network cable of your PC directly connect wit h PC port of IP Phone, then re-login IP Phone. (In the NA T mode, the default IP address of PC port is http://192.168.123.1 ) 3. Please browse to “ Advanced Settings -> MAC Clon e Setting ” page and enable the MAC Cl one function.
Advanced Settings This page defines the a dva nced functions. When you finished the setting, please click the Submit button. ICMP Not Echo: Thi s function can di sa ble echo when someone ping this device, it can avoid haker try to attack the device.
General Debug, SIP Debug, Call S t atistics + SIP Debug, Gene ral Debug + SIP Debug and All. System Authority In System Authority you can cha nge you r login password. Save & Reboot In Save & Reboot you can save the changes you have done. If you want to use new setting in the IP Phone, you have to click the Save button.
Firmware Upgrade In Firmware Upgrade function you can update n ew firm ware via HTTP or TFTP method s in this p age. Y ou can ugrade the firmware by the following step s: Select the upgrade method and the firmware co de type, AP or DSP code.
Field Descriptions Up date via There are TFTP/ FTP and HTTP three ways to provide the auto upgrade function. TFTP Serv er Input the TFTP Server add ress, and it co uld input the IP or Domain Name form. HTTP Serv er Input the HTTP Server address, and it could input the IP or Domain Name form.
and time. - Scheduling : The machine will follow the scheduling date and time to check the new firmware. Scheduling (Date) The machine will check the new fi rmware between the time range by random. Automatic Up dat e There are Notify only and Automatic ways to update.
48.
Appendix A V oice communications There are several ways to make call s to desired dest ination in IP Phone. In this section, we’ll lead you step by step to esta blish your first voice communi cati on via keypad and web browsers operat ions.
In most case, insert the optional code 151 and the value=http://192.168.0.50/t ftpboot/ Note : the 192.168.0.50 is the IP address of IPX-2000 STEP 2: Please browse to the Device Æ IP Phone menu and create new dev ice. And press the EDIT button for set up the Auto Config configuration.
STEP 5: After setting up the p arameters, please browse to the Service Æ IP PBX serv ice menu, and press RELOAD of IP PBX configuration reload select ion for activating the settings. Machine configuration on the VIP-154T : STEP 6: Please log in VIP-154T A via web browser , browse to the Advanced Settings menu.
STEP 7: After enabled the Auto-config feature, the VIP-154T A shall be able to obt ain IP address an d SIP extension information from IP PBX system IPX-2000 information. T o verify the auto-config result s, you may check the ext ension number from LCD display a ssigned by IPX-2000.
Operation steps: Pick up the VIP-154T A, you sh ould be able to hear th e dial tone, press the key pa d: 192*168*0 *2# shall be able to connect to the VIP-154T B.
STEP 3: Repeat the same configuration step s on VI P-154T B , and check the machine registration status, make sure the registrations a re completed. T est the scenario: T o verify the V oIP communicat.
Machine configuration on the VIP-154T : STEP 1: Please log in VIP-154T_A via web browser , browse to the Phone Settings menu and sele ct the Call Forward config menu.
After 2~3 seconds, the LC D screen will show below: 10-19 17:20 AF 2002 T est the scenario: VIP-154T_C pick up the telephone and dial the number 100 1(VIP-154T_A ), because VIP-154T_A had set up All F.
STEP 2: After set up completed and reboot ma chine, the LCD screen will show below: 10-19 17:20 # Forward # After 2~3 seconds, the LC D screen will show below: 10-19 17:20 A F - 1111 2 2 2 2 T est the.
Machine configuration on the VIP-154NT : STEP 1: Please log in VIP-154NT_A via web browser , browse to the Phone Settings me nu and select the Call For ward config menu.
10-19 17:20 # Forward # After 2~3 seconds, the LC D screen will show below: 10-19 17:20 AF 2002 T est the scenario: PSTN Phone Number 1 1 1 12222 pick up the telepho ne and dial the PSTN Phone Number .
STEP 2: After set up completed and reboot ma chine, the LCD screen will show below: 10-19 17:20 # Forward # After 2~3 seconds, the LC D screen will show below: 10-19 17:20 AF 192.168.0.2 T est the scenario: VIP-154T_C pick up the telephone and dial the IP Address 1 92.
Machine configuration on the VIP-154NT : STEP 1: Please log in VIP-154NT_A via web browser , browse to the Phone Settings me nu and select the Call For ward config menu.
T est the scenario: VIP-154T_C pick up the telephone a nd dial the IP Address 192.168.0.1(VIP-154NT_A), VIP-154NT will ring up but doesn’t answer the call. After 3 rings, the VIP-154T_C will hear the p ro mpt sounds then input the password 123# . VIP-154T_ C will hear the dial tone from PSTN line then input Phone Number 1 1 1 12222.
Please log in VIP-154NT_A via web browser , browse to the Phone Settings me nu and select the Auto An swer config menu. In the setting p a ge, please enable the Auto Ans w er and PIN Code Enabled func.
64 Appendix B The method of operation guide In this section, we’ll introduce the feature s method of operation, and lead you ste p by step to establish these features. Call Transfer A. Blind T ransf er 1. B call to A and they are in the process of conversation.
65 the switch code. Realm switch code: 1* : Realm 1 2* : Realm 2 3* : Realm 3 For example: The default is realm 1, inpu t the 2* (Follow by the # key) from keypad and hang u p the telephone set. It will switch to realm 2, an d it can make the SIP calls via realm 2.
66 Appendix C VIP-154T / VIP-154PT / VIP-154NT Specifications Product SIP IP Phone SIP PoE IP Phone SIP IP Phone with PSTN connectivity Model VIP-154T VIP-154PT VIP-154NT Hardware LAN 1 x 10/100Mbps RJ-45 port Power Over Ethernet 802.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Planet Technology VIP-154PT è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Planet Technology VIP-154PT - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Planet Technology VIP-154PT imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Planet Technology VIP-154PT ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Planet Technology VIP-154PT, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Planet Technology VIP-154PT.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Planet Technology VIP-154PT. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Planet Technology VIP-154PT insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
