Manuale d’uso / di manutenzione del prodotto FGSW-2624SF del fabbricante Planet Technology
Vai alla pagina of 96
FGSW-2620VM / FGSW-2624 SF User’s Manual User's Manual FGSW -2620VM 24-Port 10/100Mbps with 2G TP/SFP Combo Managed Ethernet Switch FGSW -2624SF 24 100Base-FX SFP Slots with 2G TP/SFP Combo Man.
FGSW-2620VM / FGSW-2624 SF User’s Manual T rademarks Copyright © PLANET T e chnology Corp. 2008. Contents subject to which revision without prior notice. PLANET is a registered trademark of PLANET T echnology Corp. All other trademarks belong to their respective own ers .
FGSW-2620VM / FGSW-2624 SF User’s Manual T able of Content s 1. INTRODUCTION ........................................................................................................... 6 1.1 P ACKET C ONTENTS ........................................
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.6 Factory Default ............................................................................................................................... ................ 29 4.1.7 System Reboot ..................
FGSW-2620VM / FGSW-2624 SF User’s Manual 5.5 A UTO -N EGOTIA TION ............................................................................................................................... .7 9 6. TROUBLESHOOTING ...............................
FGSW-2620VM / FGSW-2624 SF User’s Manual 1. INTRODUCTION 1.1 Packet Content s Check the contents of your package for following parts: Fast Ethernet Managed Switch x1 CD-ROM user's manua.
FGSW-2620VM / FGSW-2624 SF User’s Manual 1.3 Product Feature ¾ Physical Ports FGSW-2620VM ■ 24-Port 10/100Mbps Fast Ethernet ports ■ 2 10/100/1000Mbps TP and SFP shared co mbo interfaces ■ Re.
FGSW-2620VM / FGSW-2624 SF User’s Manual ■ 19-inch rack mount size ■ EMI standards comply with FCC, CE class A 1.4 Product S pecification Product FGSW-2620VM FGSW-2624SF Hardware Specific.
FGSW-2620VM / FGSW-2624 SF User’s Manual IGMP Sno oping Supports v1 and v2 protocol Supports IGMP Querier QoS Configuration 4 priority queu es per port IEEE 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual 2. INSTALLATION This section describes the functionalitie s of the F GSW Managed Switch's components and guides how to install it on the desktop or shelf. Basic knowledge of net working is assumed. Please read this chapter completely before continuin g.
FGSW-2620VM / FGSW-2624 SF User’s Manual 2.1.2 Switch Front Panel The unit front panel provides a simple interface monitor ing the Switch. Figure 2-1 to 2-2 shows the front panel of the Managed Switches. FGSW-2620VM Front Panel Figure 2-1 FGSW -2620VM front panel.
FGSW-2620VM / FGSW-2624 SF User’s Manual FGSW-2624SF LED in dication System LED Color Function PWR Green Lights to indicate that the Switch has power . Per 100Base-FX SF P slot LED Color Function LNK/ACT Green Lights to indicate the link through that port is successfully established.
FGSW-2620VM / FGSW-2624 SF User’s Manual 2.1.4 Switch Rear Panel The rear panel of the Managed Switch indicates an AC inle t power socket, which accepts input power from 100 to 240V AC, 50-60Hz. Figure 2-3 and Figure 2- 4 shows the rear panel of the Switch FGSW-2620VM Rear Panel Figure 2-3 FGSW-2620VM Switch rear panel.
FGSW-2620VM / FGSW-2624 SF User’s Manual 2.2 Inst all the Switch This section describes ho w to install the Managed Switch and make connections to it.
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 2-5 Attach brackets to the Managed Switch. Y ou must use the screws supplied with the mounting brac kets. Damage caused to the parts by using incorrect screws would invalidat e the warranty . Step3: Secure the brackets tightly .
FGSW-2620VM / FGSW-2624 SF User’s Manual 2.2.3 Inst alling the SFP transceiver The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and hot-s wapp able. Y ou can plug-in and out the transceiver to/from an y SF P port without having to power do wn the Managed S witch.
FGSW-2620VM / FGSW-2624 SF User’s Manual It recommends using PLANET SFPs on the Manage d Switch. If y ou insert a SFP transceiver that is not supported, the Man aged Switch will not recognize it. Before connect the other s witches, workstation or Media Converter .
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 2-8 Pull out the SFP transceiver Never pull out the modul e without pull the handle or the push bolts on the module. Direct pul l out the module with violent could damage th e module and SFP module slot of the Managed Swi tch.
FGSW-2620VM / FGSW-2624 SF User’s Manual 3. SWITCH MANAGEMENT This section introduces the configur at ion and functions of the Web-Based m anagement.
FGSW-2620VM / FGSW-2624 SF User’s Manual 3.3 Prep aring for Web Management The following shows how to start up the Web Mana ge me nt of the Managed Switch. Note the FGSW Managed Switch is configured through an Ethernet connecti on, please make sure the manager PC must be set on the same IP subnet address .
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 3-2 Login screen 3. Click "Enter" or "OK" , then the home screen of the W eb-based management appears.
FGSW-2620VM / FGSW-2624 SF User’s Manual 3.5 Online Help Y ou can click button when yo u have any configurati on question dur ing the configuring. 3.6 V iew the Port Information Y ou can direct click the port on the S witch figure on the top of w eb page.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4. WEB-BASED MANAGEMENT T o modify your PC’s IP domain to the same with Managed Switch then use the default IP address ( 192.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.1.2 Advanced Choose Advan ced from S ystem Information of Manag ed Switch, the screen in Figure 4-1-2 appears. Figure 4-1-2 Switch Advanced setting screenshot Object Description Broadcast S torm Filter Mode Configure broadcast storm control.
FGSW-2620VM / FGSW-2624 SF User’s Manual Hash Algorithm Provide MAC address table Hashing setting on S w itch; available opt ions a re CRC Hash and Direct Map. Default mode is CRC-Hash. Save button Press the button to complete the configur atio n. 4.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.3 Account Password Y ou can change web manage ment login user name and password. Figure 4-1-4 Account password screenshot Object Description User name T ype the ne w user name. The default is " admin ".
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.4 SNMP Management The SNMP is a Protocol that governs the transceiver of information between managem ent and agent. The Switch supports SNMP V1. Y ou can define manageme nt stations as trap managers an d to enter SNMP community strings.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.4.2 T rap Configuration T rap Manager A trap manager is a manag ement station that receives trap s, the system alerts generated by the switch. If no trap manager is defined, no traps will issue. Create a trap manager b y entering the IP address of the station and a community string.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.5 TFTP Upgrade It provides the functions to all ow a user to update the Switch firm ware. Before updating, make sure you have your TFTP server ready and the firmware image is on the TFTP server .
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.1.7 System Reboot Reboot the Switch in software reset. Click button to reboot the Switch. Figure 4-1-9 System Reboot screens hot 30.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2 Port Configuration In Port page, it has five p arts of setting Port control Port mirror Bandwidt h control Port statistics Port trunk. We will describe the configure detail in following.
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 4-2-2 Select the Port Control screenshot For the model FGSw-2624SF , Port-1 to Port-24 is set to 100Full as default setting.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2.2 Port Mirror The Port mirroring is a method for monitor traffic in swit ched networks. T raffic through ports can be monitored by one specific port. That is, traf fic goes in or out monitored ports will be duplicated into mirror port.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2.3 Bandwid th Control This section provides current rate limit and traffic shapping status of each port from the Switch, the screen in Figure 4-2-4 appears.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2.4 Port S t atistics The following information provides a vie w of the current port st atistic information. Scroll down for more ports statistics. Figure 4-2-5 Port S tatistics screenshot Object Description Port Indicate port 1 to port 26.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2.5 Port T runk The Link Aggregation C ontrol Protocol (LA CP) provi des a standardized means for exchanging information between Partner Systems on a link .
FGSW-2620VM / FGSW-2624 SF User’s Manual Work Port s Allo w max four ports can be aggregated at the same time. If LACP st atic trunk group, the exceed ports are standby and able to aggregate if work ports fail. If it is local static trunk group, the number must be as sa me as the group member p orts.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.2.5.3 Aggregator St ate Activity When you had setup the LA CP aggregator , you can config ure por t state activity . Y ou can mark or un-mark the port. Figure 4-2-8 Trunking – State Activit y interface Object Description Act ive The port automatically sends LACP protocol packets.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3 Switching In Switch p age, it has four part s of setting VLAN, Rapid S pannin g T ree IGMP snooping Forwarding table. We will describe the configure detail in following. 4.3.1 VLAN Understa nding IEEE 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual VLAN Description A Virtual Local Area Net work (VLAN) is a network topology configured accordi ng to a lo gical scheme rather than the physical layout . VLAN can be used to combine any collec tio n of LAN segm ents into an autonomous user group that appears as a single LAN.
FGSW-2620VM / FGSW-2624 SF User’s Manual Some relevant terms: T agging - The act of putting 802.1Q VLAN information into the header of a packet. Unt agging - The act of stripping 802.1Q VLAN information out of the packet header . 802.1Q VLAN T ags The figure below sho w s the 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual Every physical port on a s witch has a PVI D. 802.1Q ports are also assigned a PVID, for use wi thin the switch. If no VLAN are defined on the switch, all ports are then assigned to a default VLA N with a PVID equal to 1.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3.1.1.1 Port-based VLAN Packets can go among only members of the same VLAN gr oup. Note all unselected p orts are treated as belonging to another single VLAN. If the port-based VLAN enabled, the VLAN-tagging is ign ored.
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 4-3-2 VLAN – PortBase choos e interface 7. If there are many groups that over the limit of one page, you can click to vie w other VLAN groups. 8. Use button to delete un w anted VLAN. 9. Use button to modify existing VLAN gro up.
FGSW-2620VM / FGSW-2624 SF User’s Manual thus keeping the VLAN information intact. The VLAN information in the tag can then be used by other 802.1Q compliant devices on the network to make packet-forwarding dec isions. 。 Unt agging: Ports with unt agging enabled will strip the 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 4-3-4 802.1Q VLAN Setting Web Page screen 6. After setup completed, please pr ess “Save” button to take effect. 7. Please press “Back” for return to VLAN configur ation screen to add other VLAN group, the screen in Figure 4-3-3 appears.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3.1.2 802.1Q Ingress Filter This section provides 802.1Q Ingre ss Filter of each port from the S w itch , the screen in Figure 4-3-5 a pp ears.
FGSW-2620VM / FGSW-2624 SF User’s Manual Object Description Ingress Filter Ingress filtering lets frames belonging to a specific VLAN to be forwarde d if the port belongs to that VLAN. Enable: Forward only packets with VID matching this port's configured VID.
FGSW-2620VM / FGSW-2624 SF User’s Manual Bridge Protocol Dat a Unit s For STP to arrive at a stable network topology , the foll o wing information is used: 。 The unique s w itch identifier 。 The.
FGSW-2620VM / FGSW-2624 SF User’s Manual 。 Listening – the port is waiting to receive BPDU packets that may tell the port to go back to the blocking state 。 Learning – the port is add.
FGSW-2620VM / FGSW-2624 SF User’s Manual On the switch level, STP calculates the Brid ge Identifier for each switch and then sets the Root Bridge and the Designated Brid ges.
FGSW-2620VM / FGSW-2624 SF User’s Manual User-Changeable ST A Parameters The Switch’s factory default setting should cover the majority of installations. However , it is advis able to keep the default settings as set at the factory; unless, it is absolutely necessary .
FGSW-2620VM / FGSW-2624 SF User’s Manual Priority setting, or influencing STP to choose a particular port to block using the Port Priori ty and Port Cost settings is, however , relatively straight forward.
FGSW-2620VM / FGSW-2624 SF User’s Manual one (optional) Gigabit port on both switch B and C. The redundant link between swit ch B and C is deliberately chosen a s a 100 Mbps Fast Ethernet link (default port cost = 19).
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3.2.2 Per Port Configuration Y ou can configure path cost and priority of every port. Figure 4-3-7 SPT - Per Port Configuration interface Object Description Port Path cost The cost of the path to the other bridge fr om this transmitting bridge at the specified port.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3.3 IGMP Snooping About the Interne t Group Management Protocol ( IGMP) Snoopin g Computers and network devices that want to receive multicast transmissions need to inform nearby routers that they will become members of a multicast group.
FGSW-2620VM / FGSW-2624 SF User’s Manual members exist on their sub networks. If there is no response fr om a particular group, the r outer assumes that there are no group members on the net work. The T ime-to-Live (T TL) field of query messages is set to 1 so that the queries will not be forwarded to ot her sub networks.
FGSW-2620VM / FGSW-2624 SF User’s Manual Message Description Query A message sent from the querier (IGMP router or switch) asking for a response from each host belonging to the m ulticast gro up.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.3.4 Forwarding T able You can configure forwarding table of ev ery port, the screen in Figure 4-3-9. Figure 4-3-9 For w arding T able screen Object Description Port No Indicate port 1 to port 26. Current MAC Address List the source MAC addresses thos e be l ear ned on the specify port.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.4 QoS Quality of Service (QoS) is an advanced traffic prioritization f eature that a llows you to es tablish control over net w ork traffic.
FGSW-2620VM / FGSW-2624 SF User’s Manual Figure 4-4-1 QoS Configur ation Web Page screen 61.
FGSW-2620VM / FGSW-2624 SF User’s Manual Object Description QoS Mode Provid e dif ferent modes for QoS Configuration, the ava ilable options are shown as belo w: Disable QoS Priority , High Empty Th.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.5.1 802.1x/Radius Understa nding IEEE 802.1X Po rt-Based Authentication The IEEE 802.1X standard defines a client-server-b ased acce ss control and authentication protocol that restricts unauthorized clients from connecting to a LAN through publicly accessible ports.
FGSW-2620VM / FGSW-2624 SF User’s Manual z Switch (802.1X device) —controls the physi cal access to the network based on the auth enticat ion status of the client.
FGSW-2620VM / FGSW-2624 SF User’s Manual Ports in Authorized and Unauthorized S tates The switch port state determines whether or not the client is granted acc ess to the network. The port starts in the unauthorized state. While in thi s state, the por t disallows all ingress and egress traffic except for 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual If the link state of a port transitions from up to down, or if an EAPOL-logof f frame is received, the port returns to the unauthorized state. 4.5.1.1 System Configuration The section provides 802.1x -System Co nfiguratio n, the screen i n Figure 4-5-1 Figure 4-5-1 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual Object Description 802.1x Protocol Disable or enable 802.1x Protocol. Radius Server IP Set the Radi us Server IP address. Server Port Set the UDP destination port for authenticat ion requests to the specified Radius Server .
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.5.1.2 Per port Configuration Y ou can see the every port Authorization info rmation list i n table. Figure 4-5-2 802.1x Configur ation - Per Port Configuration Object Description Port Choose the port to set port Authorization.
FGSW-2620VM / FGSW-2624 SF User’s Manual 5. Create user data. T hat step is different of “Local Authe nticate”, t he establishment of the user data needs to be created on the Radius Server PC. For exam ple, the Radius Server founded on Win2000 Server , and then: 6.
FGSW-2620VM / FGSW-2624 SF User’s Manual 7. The last, run your 802.1X Client 4.5.1.3 802.1X Clie nt Configuration Windows XP is originally 802.1X supp ort. As to other operating systems (windows 98 SE, ME, 2000), an 802.1X client utility is needed. The following procedures sho w how to configure 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4. Select “ Authentication ” tab. 5. Select “ Enable netw ork acce ss control using IEEE 802.1X ” to enable 802.1x authentica t ion. 6. Select “ MD-5 Challenge ” from the drop-down list box for EAP type.
FGSW-2620VM / FGSW-2624 SF User’s Manual 9. Enter the user name, password and the lo g o n domain that your account belongs. 10. Click “ OK ” to complete the validation process .
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.5.1.4 Misc Configuration The section provides 802.1x Misc Conf i guration, the screen in Figure 4-5-3 Figure 4-5-3 802.1x Configur ation - Misc Configuration interface Object Description Quiet Period Set the period during which the port doesn't try to acquire a supplicant.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.5.2 Access Control List The Access Control List (AC L) is a concept in computer security used to enforce privil ege se p aration.
FGSW-2620VM / FGSW-2624 SF User’s Manual 4.5.3 S t atic MAC Address When you add a static MAC addr ess, it remains in the swit ch's addres s table, regardless of whether the device is physically connected to the switch.
FGSW-2620VM / FGSW-2624 SF User’s Manual Object Description MAC A ddre ss Enter the MAC address to and from which the port sh ould permanently for ward traf fic, regardless of the device network activity . Port Select a port number . VLAN ID If tag-based (IEEE 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual Object Description MAC A ddre ss Enter the MAC address that wants to filter . VLAN ID If tag-based (802.1Q) VLAN are set up on the s witch, in the VLAN ID box, type the VID to associate with the MAC address. Add Press this button for add MAC filtering on the Switch.
FGSW-2620VM / FGSW-2624 SF User’s Manual 5. SWITCH OPERATION 5.1 Address T able The Switch is implemented w ith an address table. This addr ess table composed of ma ny entries. Each entry is used to store the address information of some n ode in network , including MAC address, port no, etc.
FGSW-2620VM / FGSW-2624 SF User’s Manual Due to the learnin g function of the Ethernet switching, the source address and corres ponding port number of each incoming and outgo ing packet are stored in a routing table.
FGSW-2620VM / FGSW-2624 SF User’s Manual 6. TROUBLESHOOTING This section is intended to help you solve the most common problems on the managed switch. 6.1 Incorrect connections The switch port can auto detect straight or crossover cable when you li nk switch with other Ethernet device.
FGSW-2620VM / FGSW-2624 SF User’s Manual APPENDIX A: CABLE PIN ASSIGNMENT 7.1 Cable Cable T ypes and Specifications Cable Ty p e Max. Length Connec tor 10BASE-T Cat. 3, 4, 5100-ohm UTP 100 m (328 ft) RJ-45 100BASE-TX Cat. 5 100-ohm UT P 100 m (32 8 ft) RJ-45 100BASE-FX 50/125 or 62.
FGSW-2620VM / FGSW-2624 SF User’s Manual 7.3 RJ-45 cable pin assignment 2 1 3 6 1 2 3 6 2 1 3 6 The st andard RJ -45 recept acle/connec tor There are 8 wires on a standard UT P/ST P cable and each wir e is col or-cod ed.
FGSW-2620VM / FGSW-2624 SF User’s Manual Appendix B : Access Control List Application Guide Introduction: What is Access Cont rol List An Access Control List (ACL) consists of a set of rule s which are matched sequentiall y against a packet.
FGSW-2620VM / FGSW-2624 SF User’s Manual Before the ACL Configure … Notice – It is important to set the VLAN mode to “ Port-Based” o r “ 802.1Q ” VLAN before you start the ACL configure. Due to the ACL will check the VLAN ID if necessa ry , the VLAN mode must be set to Port-Based or 802.
FGSW-2620VM / FGSW-2624 SF User’s Manual Deny Policy Sample Case 1: Deny specific Source IP Address – Host Purpose: V erify positive and negative matches to a specific h ost IP address with a 32 bit mask , no matter the rule defined as permit or deny .
FGSW-2620VM / FGSW-2624 SF User’s Manual Str ea m Ta r g e t ID Source Address Destinatio n Address Protocol Host 1 192.168.1.1 Any Any ACL Policy Configura tion: ACL Policy Entry: 86.
FGSW-2620VM / FGSW-2624 SF User’s Manual Case 2: Deny specific Source IP Address – Class C Purpose: V erify a positive and negative matches to ne t work IP addre ss with a Class C (24 bit mask) , no matter the rule defined as permit or deny . 1. Set Hosts w ithin the same Class C Net work domain, as the targets at this case.
FGSW-2620VM / FGSW-2624 SF User’s Manual Str ea m Ta r g e t ID Source Address Destinatio n Address Protocol Class C 2 192.168.1.0 / 255. 255.255.0 Any Any ACL Policy Configura tion: ACL Policy Entr.
FGSW-2620VM / FGSW-2624 SF User’s Manual Case 3: Deny specific VLAN p acket s Purpose: V erify a positive and negative matches to ne t work IP addre ss with a specific VL A N ID , no matter the rule defined as permit or deny . 1. Packets with VLAN ID= specific ACL VLAN ID will be droppe d .
FGSW-2620VM / FGSW-2624 SF User’s Manual ACL Policy Configura tion: 90.
FGSW-2620VM / FGSW-2624 SF User’s Manual Case 4: Deny S pecify Protocol – HTTP / WWW Purpose: V erify positive and neg ative matches to network IP address with a specific protocol or TCP/UDP Port numbe r , no matter the rule defined as permit or den y .
FGSW-2620VM / FGSW-2624 SF User’s Manual Str ea m Ta r g e t ID Source Address Destinatio n Address Protocol Host 5 192.168.1.1 / 255.255.255.255 ANY HTTP ( Port 80) ACL Policy Configura tion: ACL P.
FGSW-2620VM / FGSW-2624 SF User’s Manual Case 5: Deny S pecify Protocol – SMTP Purpose: 1. SMTP p acket s from specific Host IP Address will be dropped .
FGSW-2620VM / FGSW-2624 SF User’s Manual ACL Policy Configura tion: ACL Policy Entry: 94.
EC Declaration of Conformity For the following equipment: *T ype of Product: 24-Port 10/100 + 2 Gigabit TP/SFP Combo Layer 2 Managed Ethernet Switch *Model Number: FGSW -2620VM * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address : 1 1F , No.
EC Declaration of Conformity For the following equipm ent: *T ype of Product: 24-Port 100Mbps SFP + 2 Gigabit TP/SFP Combo W e b Sm art Ethernet Switch *Model Number: FGSW -2624SF * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 1 1F , No 96, Min Chu an Road Hsin T ien, T aipei, T ai wan , R.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Planet Technology FGSW-2624SF è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Planet Technology FGSW-2624SF - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Planet Technology FGSW-2624SF imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Planet Technology FGSW-2624SF ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Planet Technology FGSW-2624SF, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Planet Technology FGSW-2624SF.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Planet Technology FGSW-2624SF. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Planet Technology FGSW-2624SF insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
