Manuale d’uso / di manutenzione del prodotto PE191M del fabbricante Planar
Vai alla pagina of 28
.
i P REFACE FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is sub jected to the following two co nditions: 1. This device may not cause harmful int erference, and 2. This device must accept any interfe rence received, including interference that may cause undesi red operation.
ii CE mark for Class B ITE (Following European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product .
iii Important Safety Instructions Please read the fol lowing instructions carefully. This m anual should be retained for future use. 1. To clean the LCD Monito r screen, first, make sure the Monitor is in the power off mode. Unplug the M onitor from it s power source before cleaning it.
iv 9. If you lost the power cord that we given, y ou must to purchase a sam e configuration/ty pe of power cord (with ground-connection) Japan ： VCTF type, 3 wires or with ground-wi re, T-mark approval is required.
v T ABLE OF C ONTENTS PREFACE ..................................................................................................................... I TABLE OF CO NTENTS ..................................................................................
.
1 C HAPTER 1 The LCD Monitor Unpacking After you unpack your LCD M onitor; make sure t he following item s are included in the box and in good condition: • LCD Monitor • Monitor -to-PC Analog sign.
2 Identifying Components Hot-Key Buttons for Quick Adjustment of Monitor Settings Figure 1-1: Hot-Key buttons 1.”Auto-adjust” short-cut button: Press button 2 to apply the m onitor setti ng automatically. A sm all “AUTO ADJUST” OSD is also displayed.
3 The LCD Monitor — Rear View Figure 1-2: LCD Monitor’s Rear Ports 1. Audio Line-in (optional ) 2. AC Power Jack 3. Upstream USB Port (optional) 4. Downstream USB Ports (optional) 5. Digital VGA Cable Connect (opt ional) 6. VGA Cable Connector 7. VESA interface: It can be mount ed to VESA arm.
4 Adjusting the Viewing Angle The LCD Monitor’s vertical angle setting range is from -3 ° to 20 ° . Please see Figure 1-3. Figure 1-3: Angle Settings.
5 Raising Your Monitor to an Upright Position and Adjusting Monitor Angle.
6.
7 Connecting AC Power, Video, Audio and USB Cable (Optional) Figure 1-4:Connecting the LCD Monitor to the PC Power Management System The LCD Monitor com plies with the VESA DPMS (versi on 1.0p) power managem ent proposal. The VESA DPMS proposal provides four phases of power saving modes by detect ing the horizontal or verti cal sync signal.
8 C HAPTER 2 The Display Controls The LCD Monitor’s Display Controls Figure 2-1: The LCD Monitor Panel 1. OSD Menu Button Press this button to pop up the OSD (On-Screen Di splay) me nu. This button is also a Funct ion Select button. 2. Adjustment Control Buttons These two buttons allow you t o adjust the selected control functions in the OSD.
9 Adjusting the Monitor’s Display OSD Main Menu (Please refer to Chapter 1 for details on functions) To access the OSD main m enu, press the OSD Menu button. Use the Function Select buttons t o scroll between the OSD mai n menu options. The option that is curren tly selected is highlighted.
10 AUTO-ADJUST : Use the Adjustment C ontrol buttons to apply the automatic monitor setting s. H-POSITION: Use the Adjustment Control buttons to move the LCD m onitor’s display left or right on a horizontal plane. V- POSITION: Use the Adjustment Control buttons t o move the LCD m onitor’s display up or down on a vertical plane.
11 OSD-V- POSITION: Use the Adjustment Control buttons to change the position of t he OSD on a vertical plane. OSD-TIMER : Use the Adjustment Control buttons to change the OSD display time. EXIT: Pressing the Function Enter button exits t he OSD-Control subm enu.
12 RESET: Pressing either of the Adjustm ent Control buttons resets Contrast , Brightness and Color parameters. EXIT: Pressing the Function Enter button exits t he Graphic-Control subm enu. Misc-Control Option The Misc-Control m enu option let s you select the OSD displa y language, adjust the volume setting and view system information.
13 Figure 2-3: The OSD Main Menu The Monitor-Control Option The Monitor-Control o ption allows you to adjust the LCD monitor’s display characteristics. With the Monito r-Control icon selected, p ress the Function Enter butt on to display the subm enu.
14 OSD-H-POSITION: Use the Adjustment Control buttons to change the positi on of the OSD on a horizontal plane. OSD-V-POSITION: Use the Adjustment Control buttons to change the position of t he OSD on a vertical plane. OSD-TIMER : Use the Adjustment Control buttons to change the OSD display time.
15 following subm enu options: LANGUAGE: Use the Adjustment Control buttons to scroll to the desired OSD display language. The supported languages are Germ an, English, French, Spanish, and Italian. AUDIO-VOLUME: Use the Adjustment Control buttons to increase or decr ease the volume of the LCD monitor’s sound syst em.
16 A PPENDIX A Technical Information LCD Monitor Specifications LCD Panel 19” SXGA Co nt r o l Functions Power Software Pow er switch with LED indicator Main Menu Submenu Monitor Control Auto Adjust / Horizont al Position / Vertical Position / Phase / Clock / Reset / Graph.
17 Input Detection AUTO-detection and OSD item for manual selection Scanning Frequency H/V, Hz (Analog mode) 24-80k 50-75 Scanning Frequency H/V, Hz (Digital mode) 30-80k 50-75 P o we r Management M e e t s VESA DPMS Power Consumption (ON/OFF, W) ON (Without USB):45W max.
18 A PPENDIX B Supported Timing Item Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sync (H/V) Operating Mode 1 NEC PC98 640x400 25.20 70.15 31.50 -/- A/D/G 2 NEC PC98 640x400 21.
19 A PPENDIX C Troubleshooting Troubleshooting Procedures This LCD Monitor was pre-adjusted in the factory with standard VGA timing. Due to output tim ing differences am ong various VGA cards, you may initially experience an un stable or unclear display wh en a new display mode or new VGA card is selected.
20 Adjustment Control button until the lines disapp ear and you have a clear display. PROBLEM: There is no LCD Display If there is no display on t he LCD, please perform the foll owing steps: 1. Make sure that the power in dicator on the LCD Mon itor is lit, all connections are secure, and the system is running on the correct tim ing.
620050251 1 01 /0 4.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Planar PE191M è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Planar PE191M - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Planar PE191M imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Planar PE191M ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Planar PE191M, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Planar PE191M.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Planar PE191M. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Planar PE191M insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
