Manuale d’uso / di manutenzione del prodotto XW-SMA4 del fabbricante Pioneer
Vai alla pagina of 48
Operating Instructions XW-SMA1 XW-SMA3 XW-SMA4 Wireless Sound System Indoor Use Only.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body .
Information for users on collection and disposal of old equipment and used batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
Before Use (Important) Safety Prec autions DANGER About the Device Please follow the instructions note d. Failure to do so may cause th e built-in lithium-ion battery to leak, overheat, ignite, or rup t ure. •Do not dispose of the device in fire or expose it to heat.
About water-res istant (XW-SMA3 only) CAUTION Observe the following precautions in regard to the device ’ s water-resistant. • Do not place the unit in water. • Do not expose the unit to a la rge amount of water. • Do not splash the unit with water.
Internal Rechargeable Lithiu m-ion Battery (XW-SMA3 only) This device uses an internal rechargeable lithium-i on battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it sev eral times. If the battery does not recharge, please co ntact us for repair infor mation.
9 En Thank you for buying this Pioneer product. Please read through these operating instructions so that yo u will know how to operate your mod el properly. After you have finished reading the instructions, put them in a safe place for future reference.
Before you start 01 10 En Chapter 1: Before you start What’s in the box Please confirm that the following accessories are in the box when you open it.
Before you start 01 11 En Using the remote control The remote has a range of about 7 m (23 ft.) at an angle of about 30º from the remote senso r. Keep in mind the following wh en using the remote control: • Make sure that there are no obstacles between the remote and th e remote sensor on the u nit.
Connections 02 12 En Chapter 2: Connections Caution • Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. • Connect the power cord after all the connections between devices have been completed.
Connections 02 13 En Plugging in After you’ve finished making all connections, plug the unit into an AC outlet. Important • Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. When turning on this unit for the first time 1 Open the terminal co ver (XW-SMA3 only).
Part names and functions 03 14 En Chapter 3: Part names and functions Remote Control 1 (standby/on) button Switches the unit between Standby and On. 2 Playback control buttons Use when operating an iPod or AirPlay with this remote control. 3 vol –/+ (volume –/+) button Use to adjust the listening volume.
Part names and functions 03 15 En Front panel 1 on (power on) in dicator When the power is on, this indicator lights. 2 input indicator When the input source changes, this indicator lights.
Part names and functions 03 16 En 6 input button Select the input source. iPod AUX IN iPod (return to the beginning) *When AirPlay or DMR play begins, the unit’s input function automatically switch es respectively to AirPlay or DMR.
Part names and functions 03 17 En • Do not lift this device by holding the wireless antenna, since damage or personal injury may result. • When using XW-SMA4, do not lift this device by holding the recessed portion of the rear panel, since damage or personal injury may result.
Connect to network 04 18 En Chapter 4: Connect to network Network setting By connecting the unit to your home LAN, you can enjoy AirPlay an d playback of music stored on your comput er or other device. • For information regarding the format of files supported by this unit, see Playable file formats on page 41.
Connect to network 04 19 En A: Connections for wireless LAN using WPS- PBC function 1 Confirm that the AC adapter and LAN cabl e are not connected to t he unit. 2 Connect the AC adap ter, and press standby/on button. The on indicator will flash blue.
Connect to network 04 20 En C: Connection set tings from a Web br owser using a computer, iPhone, tablet PC or ot her device supporting wireless LAN 1 Confirm that the AC adapter and LAN cable are not connected t o the unit. 2 Connect the AC adapter , and press standby/on button.
Connect to network 04 21 En 6 From the menu on the le ft, select “Netw ork Configuration”. If you wish to change the Fr iendly Name, select “Friendly Name” from the menu and change the name before selecting “Network Configuration.” 7 When the Auto/Manual selection screen appears, select “Auto.
Connect to network 04 22 En D: Using a Web browser on a computer supporting wired LAN to make conn ecting settings for the uni t 1 Use a LAN cable to c onnect the unit to the computer. 2 Connect the AC adapter , and press standby/on button. The on indicator will flash blue.
Connect to network 04 23 En 6 If using a wireles s LAN connection, input the router’s SSID, then select the “S ecurity” item set on the router. Also, if input of a fixed IP is required, set DHCP to OFF here and make the setting. For details, see Network Confi guration on page 27.
Connect to network 04 24 En E: Connection settings using an iOS device If you use an iPhone/iPod touch/iPad (iOS device with iOS 5.0 or later) with wireless LAN connection, apply the iOS device’s connecting settings to this unit. 1 Confirm that the AC adapter and LAN cable are not connected t o the unit.
Connect to network 04 25 En F: Wireless Direct Fun ction Important • Wireless Direct should be used only as a tempo rary connection under conditions where a normal router cannot be used. This connection is not encoded, so the music stream and music metadata will not be encrypted.
Connect to network 04 26 En Web Control For method C or D in Netwo rk setting on page 18, use the Web Control menu to make the setting. Also, you can access the Web Control menu after making the network connection. Access Web Control using a Safari Browser 1 Be sure this unit and yo ur computer are connected to the same wired or wireless network.
Connect to network 04 27 En Initial menu (System In formation) When Web Control is accessed, the following menu will appear. This menu can be used to confirm detailed information about the unit. 1 Network Configuration Select this when using methods C or D in Network setting on page 18 to make initial connection settings.
Connect to network 04 28 En Friendly Name This menu can be used to change the name of this unit as seen on t he netw ork..
iPod/iPhone/iPad playback 05 29 En Chapter 5: iPod/iPhone/iPad playback Merely by connecting your iPod/iPhone/iPad to this unit, you can enjoy high-quality sound fr om your iPod/ iPhone/iPad. Playback setting for iPod/iPhone/iPad music can be performed from this unit or t he iPod/iPhone/iPad itself.
iPod/iPhone/iPad playback 05 30 En Connecting your iPod/iPhone/iPad Caution • When connecting iPod/iPhone/iPad units, always use the Dock Connector to USB Cable provided with iPod/ iPhone/iPad units, or a commercially available D ock Connector to USB cable desig ned to supp ort iPod/ iPhone/iPad.
Music server 06 31 En Chapter 6: Music server This unit can play audio files stored on PCs or other devic es on a Local Area Net work (LAN). Introduction This unit allows you to listen to audio files on a computer or other device connected to the unit via LAN interface.
Music server 06 32 En Playing audio files stored on PCs or other devices Connecting to the LAN network For details on the connections, see page Connecting to the network through the wired or wireless LAN on page 12. Playback with DLNA Perform the playback operation on the DMR device.
Music server 06 33 En Operations using this unit's remote control You can perform the following op erati ons. Note that some buttons are not available for o peration depending on the category currently being played back. For iTunes, when the “Allow iTunes control from remote speakers” function is set to ON, you can use followi ng buttons.
Other connections 07 34 En Chapter 7: Other connections Caution • Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet.
Changing the settings 08 35 En Chapter 8: Changing the settings Setting Quick Start Mode Quick Start Mode significantly reduces the time required for startup. It also allows the unit to power on automatic ally using AirPlay and DLNA. Follow the steps below to turn on Quick Start Mode.
Changing the settings 08 36 En Firmware Update You can update this unit’s firmware via Safa ri or Microsoft Internet Explorer 8/9. Download the latest firmware for your computer from the Pioneer webs ite. The downloaded file will be compressed in the ZIP format, and must be decompressed before it can be used.
Additional information 09 37 En Chapter 9: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfuncti ons. If you think that there is something wrong with this devi ce, check the points below. Sometimes the trouble may lie in another device.
Additional information 09 38 En Network Problem Check Remedy Cannot access to the network. The LAN cable is not firmly connected. Firmly connect the L AN cable (page 12). The router is not switched on . Switch on the router . Playback does not start. The devi ce is currently disconnected from this unit or the power supply.
Additional information 09 39 En Wireless LAN Problem Check Remedy Network cannot be accessed via wireless LAN. The computer may determine th e presence/a b sence of a wireless LAN in accordance with the presence/absenc e of the cable at the time the unit’s power is turned on.
Additional information 09 40 En Battery (XW-SMA3 only) Problem Check Remedy Power won’t turn ON. Check the battery’s remaining charge state. Con nect the AC adapter and charge the batter y. Can’t charge the battery. Battery indicator flashes purple intermi ttently (flashing purple light or reg ular flashing of purple and other color light).
Additional information 09 41 En Playable file formats This unit supports the following f ile formats. No te that the files formats listed below may not be playable. Also, the compatibility of file formats varies depending on the server (DMS) and controller (DMC) used.
Additional information 09 42 En Cautions on use When moving this unit When moving this unit, be sure to first disconnect the iPod/ iPhone/iPad, LAN cable or any other equipment connected to the unit.
Additional information 09 43 En DLNA DLNA CERTIFIED ® Audio Player The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer elec tronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home.
Additional information 09 44 En aacPlus The AAC decoder uses aacPlus develo ped by Coding Technologies (www.codingtechnologies.com). FLAC FLAC Decoder Copyright c 2000 , 2001, 2002, 2003, 200 4, 2005,.
Additional information 09 45 En Specifications • Speaker section (XW-SMA1 and XW-SMA3) Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex type System . . . . . . . . . . . . . . . . . . . . . . . . . 2-way 3 speaker system Speakers: Woofer .
D e c l a r a t i o no fC o n f o r m i t yw i t hr e g a r dt ot h e R & T T ED i r e c t i v e1 9 9 9 / 5 / E C Manufacturer: PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa EU Representative’s: Pioneer Europe NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium http://www .
Português: Pioneer declara que este [*] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. 3LRQHHUWtPWRSURKODãXMHåHWHQWR>@MH YHVKRGČVH]iNODGQtPLSRåDGDYND GDOãtPLSĜtVOXãQêPLXVWDQRYHQtPL VPČUQLFH(6 Eesti: .
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagawa 212-0031, J apan PIONEER ELECTRONICS (USA) INC. P .O . BO X 1540, Long Beach, Calif or nia 90801-1540, U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer XW-SMA4 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer XW-SMA4 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer XW-SMA4 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer XW-SMA4 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer XW-SMA4, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer XW-SMA4.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer XW-SMA4. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer XW-SMA4 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
