Manuale d’uso / di manutenzione del prodotto RS-232C del fabbricante Pioneer
Vai alla pagina of 107
DVD-V7200 Industrial DVD Player RS-232C C OMMAND P ROTOCOL M ANUAL PRELIMINARY Version 2.20 October 7 , 1999 Pioneer Corporation Pioneer New Media Technologies, Inc.
This manual is copyrighted with all rights reserved. No part of this document may be reprinted, produced, translated or utilized in any form or by any means now known or hereafter invented including, .
FCC INFORMATION The equipment described in this manual has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against radio and television reception interference in a residential installation.
.
- i - Table of Contents 1. INTRODUCTION ................................................................................................................... 1 2. INTERFACE ................................................................................
- ii - 5.12 Scan Stop ..................................................................................................................... 19 5.13 Multi-Speed Forward (DVD, VCD) ........................................................................
- iii - 6.6 Frame Number Request (DVD) ...................................................................................... 51 6.7 Block Number Request (CD, VCD) ............................................................................... 52 6.8 Total Frame Request (DVD) .
- iv - 8. DVD-V7200 INTERNAL REGISTERS ................................................................................. 75 8.1 Current Time/Frame ...................................................................................................... 75 8.
Introduction - 1 - 1. INTRODUCTION This document defines the RS-232C command protocol for the Pioneer DVD-V7200 Industrial DVD Player. The DVD-V7200 is capable of playing DVD, CD and VCD discs. The device has three control methods: front panel, remote control or computer interface through the RS-232C serial port.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 2 - 2. INTERFACE 2.1 Interface Connector A computer may be connected to the DVD-V7200 through either the RS-232 serial port or the parallel port by using a 15-pin D-Sub connector (e.
Computer Control - 3 - 2.3.2 External Switch Control (see Chapter 9) Control the player with the External Option Switches (SW#). Please make sure the Key Lock condition. If the player is in the Key Lock mode, the player ignores the control. (Please refer to the Key Lock command description.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 4 - 3. SERIAL CONTROL 3.1 Serial Interface Specifications 3.1.1 Signal Interface The signal interface is an RS-232C connection. 3.1.2 Data Type Data Length: 8 bit Stop Bit: 1 bit Parity bit: No Parity 3.
Computer Control - 5 - 3.3 Command and Status The computer transmits a command to the DVD-V7200 and the player responds with the message, ‘execution complete’.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 6 - NOTE: Some commands, sent after a specialty command which includes an AUTOSTOP setting, (PL, MF, MR, etc.), cause the player to execute the new command before the AUTOSTOP is enacted (see Chapter 5, Command Descriptions).
Computer Control - 7 - 3.4 Error Messages If an error occurs during a command execution, the player returns an error code. The table below lists each code with a description of the error: Code Message.
.
Command Structure - 9 - 4. COMMAND STRUCTURE The DVD-V7200 supports the commands listed below. COMMAND SUPPORTING FORMATS Name Mnemonic DVD LB comp. DVD CD VCD Open OP X X X X Close CO X X X X Reject .
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 10 - Weekly Timer Data Upload * 1 WU X X X X Weekly Timer Data Download * 1 WD X X X X Text File Data Upload * 1 UU X X COMMAND SUPPORTING FORMATS Name Mnemonic DVD LB comp.
Command Structure - 11 - NOTE: A command with an argument or address parameter is prefaced by arg (argument) or ards (address). If the arg or ards is in parentheses ( ) , the parameter is optional. 4.1 Command Mnemonic Each command is expressed as two (2) ASCII alphabetic characters.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 12 -.
Command Structure - 13 - 4.3 Command String A command string consists of multiple commands on one line. The maximum length of a command string is 32 characters.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 14 - player returns a separate status value upon completion of each command. A status value is a character string with a <CR> termination code.
Command Structure - 15 - 5. COMMAND DESCRIPTI ONS 5.1 Open Function : Door Opens (Tray Ejects) Format : OP Explanation : If the command is sent while the player is in the Park mode, the tray ejects and the player enters the Open mode. After the tray is ejected, the player returns the completed status message.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 16 - completely stops, the player enters Park mode and returns the completed status message. If the command is sent while the player is in Park mode, the player enters Open mode and it opens the tray.
Command Descriptions - 17 - If the player is in Random Access mode when the Play command is sent, the player enters Play mode and returns the completed status message. The Play mode is the only mode in which audio plays back simultaneously with video.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 18 - Explanation : If the command i s sent while the player is in Random Access mode, the pause occurs at the current disc location. The player returns the completed status message immediately.
Command Descriptions - 19 - returns the error message (E04) . NOTE: One DVD Step Reverse is equal to between 15 and 30 frames NOTE: A Video CD does not support the Step Reverse command Execution : Com.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 20 - 5.13 Multi-Speed Forward (DVD, VCD) 5.14 Multi-Speed Reverse (DVD) Function : Playb ack occurs at the speed specified in t.
Command Descriptions - 21 - The available address modes in each disc type are listed below: Address Mode DVD LB-compatible DVD CD VCD FR (frame) X X TM (time) X X X CH (chapter) X X TI (title) BK (block) IX (index) X TR (track) X When playing back a VCD disc, sometimes an Auto Stop command within a Block Number address misses the specified address.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 22 - Execution : Command String Status Return DVD-V7200 4SPMF<CR> R<CR> Play mode to 1 / 16 speed forward 30SP<CR> R<CR> Multi-Speed to ½ Multi-Speed 5.
Command Descriptions - 23 - Execution : Command String Status Return DVD-V7200 FR4500SE<CR> Searches to frame 4500 Play mode Address Mode set = Frame R<CR> Still mode (DVD) CH5SE<CR>.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 24 - Command String Status Return DVD-V7200 CH5SL <CR> Play mode R<CR> Search Chapter 5 and Play mode.
Command Descriptions - 25 - The available addres s modes are listed below: Address Mode DVD LB-compatible DVD CD VCD FR (frame) X X TM (time) X X X X CH (chapter) X X TI (title) X X BK (block) X IX (index) X X TR (track) X X Sometimes, an Auto Stop command within a VCD Block Number Address misses the specified address.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 26 - Command String Status Return DVD-V7200 LOSE<CR> R<CR> Search mode to Still mode ?T<CR> 13642<CR> Time code in program end area LOPL<CR> R<CR> Continue playing to lead-out and then return R<CR> 5.
Command Descriptions - 27 - 5.22 Block Number (CD, VCD) Function : Address specification flag is set to block Format : BK Explanation : Address assignment proceeds by block. All subsequent addresses are handled as a block number. The Block refers to a physical block within a CD or a VCD.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 28 - Explanation : Address assignment proceeds by chapter number. All subsequent addresses are handled as a chapter number. If the chapter number is not recorded on the disc, an error message is returned.
Command Descriptions - 29 - Format : TR Explanation : Address assignment proceeds by track. All subsequent addresses are handled as a track number. Please refer to 8.10 Serial Use Address Flag. Execution : Command String Status Return DVD-V7200 TR15SE<CR> s earches to track 15 Play mode to Search mode R<CR> Pause mode 5.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 30 - 5.31 Select Angle (DVD) Function : Select Angle Format : Integer AG Explanation : The command selects a viewing angle. The player allows up to 9 angles for playback. If an unavailable angle is selected, an error message (E04 or E06) is returned.
Command Descriptions - 31 - 5AD<CR> R<CR> audio output = Stereo becomes audio output = Audio 5, L-ch 5.34 Video Control Function : Video switch is turned ON / OFF Format : Integer VD Explanation : The comm and switches the video output on or off then returns the completed status message.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 32 - 1 Displays user’s area that is set by Register A 2 Title, chapter, track number, length of play, etc. 3 Play time or remain time of each chapter 4 Pla y time or remain time of each title 5 Audio and Subtitle information and Transfer rate etc 6 Add frame number to ARG.
Command Descriptions - 33 - Format : Integer KL Explanation : The command enables/disables the remote control , the external switch including power control functin, mouse and access ing to the front panel buttons. The default value is 0 (OFF) thus the player is unlocked.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 34 - Error E06 is returned from a player in case BS command is issued with GP command that has unknown group number. 1 to 300, decimal system integer number is used in it s argument.
Command Descriptions - 35 - 5.41 Blackboard / Stack Data Upload Function : Reads the data in the player : Blackboard data, Barcode data, Stack data Format : BU Explanation : The player send s the data to the computer after the command while it is Park mode.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 36 - 1206 - 1207 Blackboard #300 Search Pointer 2 bytes 1208 - 1209 (7) Number of Next Blackboard Data 2 bytes 1210 - 1211 (8) .
Command Descriptions - 37 - It indicates the umber of the next Picture / Text. It is available from 0 to 299. And it shows with HEX digit. (10) It indicates the head address of the next Barcode / Command Stack data or Picture / Text data. The head address is relative address.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 38 - *BARCODE_SRP #n : Barcode #n Search Pointer Outline of Barcode Command : Barcode Command has these formats as follows.
Command Descriptions - 39 - + 7 02H The ending Title number + 8 00H The ending Address number (MSB) + 9 00H The ending Address number + 10 12H The ending Address number + 11 c0H The ending Address num.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 40 - 2 : Gray 3 : Red 4 : Blue 5 : Green 6 : Yellow 7 : Orange bit1, 0 : Paint mode 0 : Only fr ame 1 : The frame with filled color in inside it. 2 : The frame with filled color in outside it.
Command Descriptions - 41 - + 18 00H The ending point of Text (MSB) + 19 44H The ending point of Text (LSB) + 20 42H Text data ~ ~ ~ + m - 1 6bH Text data + m ffH 0xff *BARCODE_SRP #n : Barcode #n Search Pointer * 20 < m < 341 Text data includes the blanks.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 42 - The Communication flows as follows. Flow of the communication : (N=8420) Computer DVD-V7200 ---BU <CR> ---> <-.
Command Descriptions - 43 - <--76th byte data<CR>-- <---R<CR>---- Format of the data : BP Contents Numbers of bytes 0 - 1 (1) Total number of the transfer data. (fixed number = 004cH) 2 bytes 2 (2) Set the mode on Monday 1 bytes 3 (3) Set the hour of Turning on on Mon.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 44 - 67 (5) 00 (fixed data = 00H) 1 bytes 68 (6) The upper digit of Title number or Stack group number that is searched on Sun. Set it with BCD. 1 bytes 69 The lower digit of Titke number of Stack group number that is searched on Sun.
Command Descriptions - 45 - It indicates the minute of the player power will be turned on. Basically, the minute is used with the hour and is expressed with 00 through 59.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 46 - 16 ffH 17 00H Fixed data 18 01H The upper digit of Stack group 19 23H The lower digit of Stack group 20 00H Fixed data 21 01H Fixed data 22 ~ ~ ~ Execution : Command String Status Return DVD-V7200 WU<CR> Park mode R<CR> 004c4008.
Command Descriptions - 47 - Execution : Command String Status Return DVD-V7200 WD<CR> Park mode 004c4008....0 01ab6<CR> R<CR> Receives the command and starts the transfer of the data, 76 bytes. It ends with <CR>. R<CR> 5.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 48 -.
Current Address Request Descriptions - 49 - 6. CURRENT PLAYER CO NDITION REQUEST DESCRIPTIONS 6.1 P-Block Number Request Function : The command returns information for the following volume groups: DVD.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 50 - Explanation : The player returns the contents of the Title/Track Number Register. The track number is a 2-digit integer. Correct values will not be shown unless the player is in Random Access Mode or is playing the lead-in/out area of the disc.
Current Address Request Descriptions - 51 - Execution : Command String Status Return DVD-V7200 Play mode (VCD) ?T<CR> 03213<CR> 32 minutes, 13 seconds ?T<CR> 11742<CR> 117 minutes, 42 seconds 6.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 52 - Execution : Command String Status Return DVD-V7200 ?F<CR> 0002047<CR> Play mode frame 2047 ?F<CR> 0095010<CR> Play mode frame 950107 6.
Current Address Request Descriptions - 53 - Status information is returned in the following format: C 1 C 2 C 3 C 4 C 5 C 6 C 7 C 8 C 9 C 10 <CR> C 1 C 2 first track number C 3 C 4 last track nu.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 54 - C 2 Layer Structure 0 = Single 1 = Dual X = Unknown C 3 Path Type 0 = Parallel 1 = Opposite X = Unknown C 4 Chapter Search.
Current Address Request Descriptions - 55 - Status information is returned in the following format: C 1 C 2 C 3 C 4 C 5 C 6 C 7 C 8 <CR> C 1 Disc Mount 0 = No 1 = Yes X = Unknown C 2 Not Used X .
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 56 - (CD, VCD) + Title, Chapter, Frame/Track, Time 4 User’s area 1 0 0 0 5 User’s area + Argument 1 1 0 1 0 6 User’s area.
Current Address Request Descriptions - 57 - 3 ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν 4 ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν ν 5 ν ν ν ν ν ν ν ν ν ν .
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 58 - Argument Function 0 (default) Normal 64 Audio SQ invalid 128 Video SQ invalid 192 VD/AD SQ invalid 6.
Current Address Request Descriptions - 59 - Available characters are shown in the table below (from 20h through 9Fh): 0123 456789 A B C D E F 2 ! “ # $ % & ' ( ) * + , - .
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 60 - 7 Bytes integer <CR> (=YYMMDDWWHHMMSS<CR>) Explanation : The real time clock may be set using the following f .
Current Address Request Descriptions - 61 - 256 STILL MODE FRAME FIELD 512 1024 2048 4096 Dynamic Range COMPression [9 option, OFF or 1 to 8 ] (0) OFF, (512) 1, (1024) 2, (2048) 4, ~, (4096) 8 8192 MA.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 62 - Execution : Command String Status Return DVD-V7200 2CM<CR> R<CR> CCR = 3 (Default Communication Mode) to CCR = 2 (Communication Mode-2) 6.
Current Address Request Descriptions - 63 - Explanation : The command returns the play er’s name as P1551XX where P1551 is the name of series and XX is a 2-digit serial code (not product serial number) . Execution : Command String Status Return DVD-V7200 ?X<CR> P155102<CR> Series name P1551 and serial code 02 6.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 64 - 6.26 Player Region Code Request Function : Returns player region code Format : ?H Explanation : The command returns the player’s region code(s). Execution : Command String Status Return DVD-V7200 ?H<CR> 02<CR> Region Code 2 6.
Current Address Request Descriptions - 65 - Format : ?E Explanation : The player returns the most recent error codes. The report consists of Error Codes logged since the unit was turned on.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 66 - 6.32 Register A Request Function : Returns the contents of Register A Format : $A Explanation : The player returns a detailed list of the Register A attributes.
Current Address Request Descriptions - 67 - 6.34 Register D Request Function : Returns the contents of Register D Format : $D Explanation : The player returns the termination setting of TxD from Register D .
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 68 - If the command is available in that player situation, the player returns immediately “R<CR>”*. In case the disc does not have the disc menu though the command [1 or 2 MC<CR>] is issued, an error message (E04) is returned.
Current Address Request Descriptions - 69 - Integer directions 1 Up 2 Down 3 Left 4 Right If the command is able to use in that player situation, the player returns immediately “R<CR>”*. If the disc has not any button on the screen when the command is issued, an error message (E04) is returned.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 70 - ET<CR> R<CR> Fixes the sellection and executes the program that is assigned on it ----------------------------.
Current Address Request Descriptions - 71 - The player only returns system parameter information in case ID = 0001. The player returns E06 except available parameter. The below is the simple list of the (SPRM) System Parameter. If you want more detailed information.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 72 - Execution : Command String Status Return DVD-V7200 00010008GI<CR> 1400<CR> Selecting button #5 now.
Operating Modes - 73 - 7. OPERATING MODES The Operating or Active mode consists of five sub-modes; Open, Park, Setup, Random Access and Reject. A command causes the player to change from one sub-mode to another. The five sub- modes are described below.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 74 - 7.5 Reject When the Reject command is sent to the player, video playback stops.
DVD-V7200 Internal Registers - 75 - 8. DVD-V7200 INTERNA L REGISTERS When commands to the player are accompanied by arguments, (e.g., Title Number, Chapter Number, Time Code, etc.), argument values are set in the appropriate player registers. This chapter describes each internal register of the player.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 76 - 8.8 Remote Control Data Register The register contains the temporary data input by the Remote Control Unit. 8.9 Laser Barcode Buffer The register contains the compatible Laser Barcode data transmitted via the Remote Control Unit.
DVD-V7200 Internal Registers - 77 - The function is identical to the Mark Time/Frame command (reference 8.14 above). 8.16 Mark Index The register contains the index number as a marker. The function is identical to the Mark Time/Frame command (reference 8.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 78 - 10 ADDRESS MODE FLAG 1 CURRENT TIME/FRAME 2 P-TIME 3 CURRENT TITLE/TRACK CHAPTER 4 CURRENT INDEX 5 SERIAL DIGIT BUFFER COM.
DVD-V7200 Internal Registers - 79 -.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 80 - 9. EXTERNAL SWITCH C ONTROL To control the player through the Serial Interface Connector, use a special switching circuit. The circuit pins must terminate to a +5 volts DC with an internal 20,000 ohms resistor.
DVD-V7200 Internal Registers - 81 - X X X 15 X X X 16 X X X 17 X X X 18 X X X 19 X X X 20 Diode Assignment List (cont.) SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 ENTER X Y Z Function X X X STACK GR.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 82 - Diode Specifications Forward Voltage Drop (VF) Less than 0.7 (IF 1ma) Surge Forward Current (IFSM) Less than 100ma Forward Current Less than 10 µ µ a 9.
DVD-V7200 Internal Registers - 83 - 9.2.2 Diode Matrix Circuit.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 84 - 10. ADDITIONAL NOTES 1. If the disc that is currently playing has a picture stop code recorded, when the player reaches the stop code point, it enters Still Mode. 2. If Prohibit Pause is set for Stop Marker playback, an error is issued at any Stop Marker Point.
Complete Command List by Name - 85 - APPENDIX A - COMPLETE COMMAND LIST BY NAME NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 86 - COMMAND SUPPORTING FORMATS Name Mnemonic DVD LB comp. DVD CD VCD Print Character arg PR x x x x Real Time Clock Request ?W.
Complete Command List by Mnemonic - 87 - APPENDIX B - COMPLETE COMMAND LIST BY MNEMONIC NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 88 - COMMAND SUPPORTING FORMATS Mnemonic Name DVD LB comp. DVD CD VCD CL Clear x x x x arg CM Communication Control Set x x x x.
DVD Command List - 89 - APPENDIX C - DVD COMMAND LIST NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 90 - COMMAND Mnemonic Name Register B Set (Squelch) arg RB Reject RJ Scan Forward NF Scan Reverse NR Scan Stop NS Search adrs S.
LB Compatible DVD Command List - 91 - APPENDIX D - LB COMPATIBLE DVD COMMAND LIST NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 92 - COMMAND Mnemonic Name Register B Request $B Register B Set (Squelch) arg RB Reject RJ Scan Forward NF Scan Reverse NR Scan.
CD Command List - 93 - APPENDIX E - CD COMMAND LIST The DVD-V7200 supports the following commands. NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 94 - COMMAND Mnemonic Name Reject RJ Scan Forward NF Scan Reverse NR Scan Stop NS Search adrs SE Select Audio arg AU Stack Grou.
VCD Command List - 95 - APPENDIX F - VCD COMMAND LIST The DVD-V7200 supports the following commands. NOTE: Any command prefaced with an * will be supported by firmware upgrade. NOTE: Any command with an argument or address parameter will be prefaced by arg and ards, argument and address, respectively.
PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual - 96 - COMMAND Mnemonic Name Reject RJ Scan Forward NF Scan Reverse NR Scan Stop NS Search adrs SE Select Audio arg AU Speed arg .
Error Codes - 97 - Appendix G - Error Codes Code Message Description E00 communication error Communication Line Error due to framing error or buffer overflow. E04 feature not available Non-Usable Function has been tried. Either the command mnemonic is wrong or the command can not be used in this mode.
.
Error Codes - 99 - DVD-V7200 Industrial DVD Player RS-232 Command Protocol Pioneer Electronic Corporation 4-1, Meguro 1-chome Meguro-ku, Tokyo 153 JAPAN http://www.pioneer.co.jp Pioneer New Media Technologies, Inc. 2265 East 220 th Street Long Beach, California 90810 United States of America (310) 952-2111 http://www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer RS-232C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer RS-232C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer RS-232C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer RS-232C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer RS-232C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer RS-232C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer RS-232C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer RS-232C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
