Manuale d’uso / di manutenzione del prodotto DV-667A-S del fabbricante Pioneer
Vai alla pagina of 88
01 1 En DVD Player DV-563A DV-667A- S DV-667A- K Operating Instructions DV -667A only DV -667A only DV563.book 1 ページ ２００３年４月２５日 金曜日 午後８時１１分.
READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to.
POWER-CORD PROTECTION — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
[For Canadian model] This Class B digital apparatus complies with Canadian ICES-003. [Pour le modèle Canadien] Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. H009_2L NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
6 En Contents 01 Before you start Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 What’s in the box . . . . . . . . . . . . . . . . . . . . 9 Putting the batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . . .
7 En 07 Audio Settings menu Audio DRC . . . . . . . . . . . . . . . . . . . . . . . . 49 Virtual Surround . . . . . . . . . . . . . . . . . . . . 49 Channel Level . . . . . . . . . . . . . . . . . . . . . . 50 Speaker Distance . . . . . . . . . . . . .
Before you start 01 8 En Chapter 1 Before you start Features DVD-Audio and SACD compatible Experience the super high-quality audio performance of DVD-Audio and Super Audio CD (SACD).
Before you start 01 9 En What’s in the box Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Audio/video cable (red/white/yellow plugs) • Power cable • Operating instructions • Warranty card (U.
Before you start 01 10 En Using the remote control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • The remote has a range of about 7m (23ft.).
Before you start 01 11 En ties, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens.
Before you start 01 12 En • When naming MP3 files, add the corre- sponding file name extension (.mp3). Files are played according to the file extension. To prevent noise and malfunc- tions, do not use these extensions for other kinds of files. • This player can recognize up to 999 files (MP3/JPEG) and up to 499 folders.
Connecting up 02 13 En Chapter 2 Connecting up Rear panel connections • When connecting this player up to your TV, AV receiver or other components, make sure that all components are switched off and unplugged. 1 CONTROL IN / OUT For passing remote control signals to other Pioneer components ( page 19 ).
Connecting up 02 14 En Easy connections The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through the speakers in your TV. • This player is equipped with copy protec- tion technology.
Connecting up 02 15 En • Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front panel STANDBY/ON button, or the remote control, and wait of the -OFF- message to disappear from the player’s display.
Connecting up 02 16 En Connecting using the component video output You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equip- ment). This should give you the best quality picture from the three types of video output available.
Connecting up 02 17 En Connecting for multichannel surround sound You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital outputs. In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs.
Connecting up 02 18 En Connecting to an AV receiver To enjoy multichannel surround sound you need to connect this player to an AV receiver using a digital output.
Connecting up 02 19 En Controlling this player from another Pioneer component This player has SR jacks which allow you to use the remote sensor on one Pioneer compo- nent to control another. Use a mini-jack plug to connect the CONTROL OUT of one component to the CONTROL IN of another.
Controls and displays 03 20 En Chapter 3 Controls and displays Front panel 1 STANDBY/ON Press to switch the player on or into standby. 2 FL DIMMER Press to dim or brighten the display. 3 Disc tray 4 OPEN/CLOSE Press to open or close the disc tray.
Controls and displays 03 21 En Display 1 V-PART Lights when playing a video part of a DVD disc. 2 PRGSVE Lights when the player is set to output progressive scan video (see Component Out on page 56 ). 3 GRP Indicates that the character display is showing a DVD-Audio group number.
Controls and displays 03 22 En Remote control 1 STANDBY/ON Press to switch the player on or into standby. 2 AUDIO Press to select the audio channel or language (see Switching DVD-Video audio language on page 44 ). 3 SUBTITLE Press to select a subtitle display (see Switching subtitles on page 43 ).
Controls and displays 03 23 En 12 PLAY MODE Press to display the Play Mode menu. (You can also get to the Play Mode menu by pressing HOME MENU and selecting Play Mode). 13 SURROUND Press to activate/switch off 2 V/SRS TruSur- round. 14 OPEN/CLOSE Press to open or close the disc tray.
Getting started 04 24 En Chapter 4 Getting started Switching on After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the front panel, or on the remote control to switch the player on. Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
Getting started 04 25 En DV-667A Taiwanese model only 2 Use the / (cursor left/right) buttons to select either ‘Wide screen (16:9)’ or ‘Standard size screen (4:3)’ according to the kind of TV you have, then press ENTER. DV-667A Taiwanese model only 3 Press ENTER again to finish setting up.
Getting started 04 26 En • Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item on-screen, then press ENTER . • The buttons to navigate the on-screen displays are available on the front panel as well as the remote control.
Getting started 04 27 En 4 Select a DVD language. Some DVD discs feature on-screen menus, soundtracks and subtitles in several languages. Set your preferred language here. DV-667A Taiwanese model only • Note that the language you choose here may not be available on all discs.
Getting started 04 28 En 9 Do you have surround speakers connected to your AV receiver? Select Connected or Not Connected . 10 Do you have a sub-woofer connected to your AV receiver? Select Connected or Not Connected . • If you selected Not Connected in step 7, that completes the setup.
Getting started 04 29 En 15 Press ENTER to complete the setup, or press HOME MENU to quit the Setup Navi- gator without making any changes. Congratulations, setup is complete! Playing discs The basic playback controls for playing DVD, CD, SACD, Video CD/Super VCD and MP3 discs are covered here.
Getting started 04 30 En 3 Load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down). 4 Press (play) to start playback.
Getting started 04 31 En • My AV receiver is definitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work with this player. What’s wrong? For digital copy-protection purposes, some 96/88.2kHz DVD discs only output digital audio downsampled to 48/44.
Getting started 04 32 En Front panel controls The (play), (stop), and (pause) buttons on the front panel work in exactly the same way as their remote control equivalents. The combined scan/skip buttons on the front panel ( and ) work slightly differently from the remote buttons.
Getting started 04 33 En • Most of the buttons to navigate DVD disc menus are available on the front panel as well as the remote control. (See Front panel on page 20 for the location and description of all the front panel controls.) Video CD/Super VCD PBC menus Some Video CD/Super VCDs* have menus from which you can choose what you want to watch.
Playing discs 05 34 En Chapter 5 Playing discs Introduction Most of the features described in this chapter make use of on-screen displays. For an expla- nation of how to navigate these, see Using the on-screen displays on page 25 .
Playing discs 05 35 En For DVD-Audio discs select a group, or a track within a group. For SACD discs select a track within the current playback area. For a VR (Video Recording) mode DVD-RW disc select beween the PlayList and Original areas of the disc, or a title.
Playing discs 05 36 En Scanning discs You can fast-scan discs forward or backward at various different speeds. 1 During playback, press or to start scanning. 2 Press repeatedly to increase the scan- ning speed. • MP3 tracks can only be scanned at one speed.
Playing discs 05 37 En • When changing direction with a DVD- Video disc, the picture may ‘move’ in an unexpected way. This is not a malfunc- tion.
Playing discs 05 38 En 2 Select a repeat play option. If program play is active, select Program Repeat to repeat the program list, or Repeat Off to cancel. For DVD-Video and DVD-RW discs, select Title Repeat or Chapter Repeat (or Repeat Off ). For DVD-Audio discs, select Group Repeat or Track Repeat (or Repeat Off ).
Playing discs 05 39 En Using random play Use the random play function to play titles or chapters (DVD-Video), groups or tracks (DVD- Audio), or tracks (CD, SACD, Video CD/Super VCD and MP3 discs) in a random order. You can set the random play option when a disc is playing or stopped.
Playing discs 05 40 En Creating a program list This feature lets you program the play order of titles/groups/chapters/folders/tracks on a disc. • You can’t use Program play with VR format DVD-RW discs, Video CDs/Super VCDs playing in PBC mode, or while a DVD disc menu is being displayed.
Playing discs 05 41 En • To add a track, first highlight the group, then press (cursor right) and select a track from the list. For a SACD, CD or Video CD/Super VCD, select a track to add to the program list. For an MP3 disc, you can add a whole folder, or a track within a folder to the program list.
Playing discs 05 42 En Editing a program list After creating a program list, you can add, delete and change steps. 1 Press PLAY MODE and select ‘Program’ from the list of functions on the left. 2 Select ‘Create/Edit’ from the list of program options.
Playing discs 05 43 En Searching a disc You can search DVD-Video discs by title or chapter number, or by time. DVD-Audio discs can be searched by group or track number. SACDs, CDs and Super VCDs can be searched by track number, and Video CDs by track number or time.
Playing discs 05 44 En Switching DVD-Video audio language When playing a DVD-Video disc recorded with dialog in two or more languages, you can switch audio language during playback. 1 Press AUDIO repeatedly to select an audio language option. • Some discs only allow you to change audio language from the disc menu.
Playing discs 05 45 En Zooming the screen Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a DVD-Video, DVD-Audio or Video CD/Super VCD. 1 During playback, use the ZOOM button to select the zoom factor.
Playing discs 05 46 En • DVD-Video displays • DVD-Audio displays • VR format DVD-RW displays • SACD displays (During multichannel playback only) • CD and Video CD displays (During PBC playba.
Viewing JPEG discs 06 47 En Chapter 6 Viewing JPEG discs Viewing JPEG discs After loading a CD/CD-R/RW containing JPEG pictures, press to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order.
Viewing JPEG discs 06 48 En 3 To resume the slideshow from the highlighted file, press ENTER. Using the Photo Browser The Photo Browser displays nine thumbnail images at a time from the current folder. 1 From the Disc Navigator screen, high- light a folder to display then press ENTER.
Audio Settings menu 07 49 En Chapter 7 Audio Settings menu Audio DRC • Default setting: Off When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely—including some of the dialog. Switching Audio DRC (Dynamic Range Control) to On can help by bringing up the quieter sounds, while controlling loud peaks.
Audio Settings menu 07 50 En 1 Press HOME MENU and select ‘Audio Settings’ from the on-screen display. 2 Highlight Virtual Surround, then use the / (cursor left/right) buttons to change to ‘ 2 V/SRS TruSurround’ or ‘Off’, as required.
Audio Settings menu 07 51 En 4 Variable setting only: Set the channel levels for each speaker. • Use the / buttons (cursor up/down) to select a speaker. • Use the / buttons (cursor left/right) to adjust the channel level for that speaker.
Video Adjust menu 08 52 En Chapter 8 Video Adjust menu Video Adjust • Default setting: Standard From the Video Adjust screen you can select the standard video presentation or define presets of your own. 1 Press HOME MENU and select ‘Video Adjust’ from the on-screen display.
Video Adjust menu 08 53 En You can adjust any or all of the following picture quality settings: • Contrast – Adjusts the contrast between light and dark. • Brightness – Adjusts the overall bright- ness. • Chroma Level – Adjusts how saturated colors appear.
Initial Settings menu 09 54 En Chapter 9 Initial Settings menu Using the Initial Settings menu The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.
Initial Settings menu 09 55 En Dolby Digital Out You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.
Initial Settings menu 09 56 En • Even when set to Down Sample Off , some discs will still output down-sampled audio through the digital outputs (you only get full sampling rate audio through the analog outputs). • High sampling rate DVD-Audio discs (192kHz or 176.
Initial Settings menu 09 57 En • Default setting: Interlace If you have a progressive-scan compatible TV, set this to Progressive for flicker-free video output. If your TV is not compatible with progressive-scan video, set to Interlace . Check the operating instructions that came with your TV if you’re unsure about its compatibility.
Initial Settings menu 09 58 En Compatibility of this unit with progressive-scan TVs. This player is compatible with progressive video Macro Vision System Copy Guard. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPAT- IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI- FACTS TO BE DISPLAYED IN THE PICTURE.
Initial Settings menu 09 59 En • You can switch between the languages recorded on a DVD disc during playback using the AUDIO button. (This does not affect this setting.) See Switching DVD- Video audio language on page 44 . • Some DVD discs set the audio language automatically when loaded, overriding the Audio Language setting.
Initial Settings menu 09 60 En Some multilingual discs have disc menus in several languages. This setting specifies in which language the disc menus should appear. Leave on the default setting for menus to appear in the same language as your Subtitle Language —see above.
Initial Settings menu 09 61 En Angle Indicator • Default setting: On If you prefer not to see the camera icon on- screen during multi-angle scenes on DVD discs, change this setting to Off .
Initial Settings menu 09 62 En Registering a new password You must register a password before you can change the Parental Lock level or enter a Country code. 1 Select ‘Password’. 2 Use the number buttons to enter a 4- digit password. The numbers you enter show up as asterisks (*) on-screen.
Initial Settings menu 09 63 En Setting/changing the Parental Lock level 1 Select ‘Level Change’. 2 Use number buttons to enter your password, then press ENTER. 3 Select a new level. Press (cursor left) repeatedly to lock more levels (more discs will require the password); press (cursor right) to unlock levels.
Initial Settings menu 09 64 En • Select by code number: Press (cursor right) then use the number buttons to enter the 4-digit Country code (you can find the Country code list on page 76 .) 4 Press ENTER to set the new Country code and return to the Options menu screen.
Initial Settings menu 09 65 En This specifies whether the menu (Top menu) is automatically displayed after loading a disc. Set to On if you want the menu displayed automatically, or Off if you don’t want it displayed. • Some DVD discs display a menu automat- ically regardless of this setting.
Initial Settings menu 09 66 En PhotoViewer • Default setting: On This setting is important if you load a disc that contains both MP3 audio files and JPEG picture files. The default On setting allows you to view only the JPEG files on this kind of disc.
Initial Settings menu 09 67 En • Some DVD-Audio discs don’t allow down- mixing of audio. These discs always output multi-channel audio regardless of the setting made here.
Initial Settings menu 09 68 En Speaker Distance • Default setting: all speakers 10 ft. (3 m) You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. These settings do not affect any digital audio output.
Initial Settings menu 09 69 En When set to Fix , the level of each of the 5.1 channel analog outputs is fixed. Choose Vari- able if you want to adjust the relative levels to balance the surround sound better for your listening room.
Additional information 10 70 En Chapter 10 Additional information Taking care of your player and discs Handling discs When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge.
Additional information 10 71 En Discs to avoid Discs spin at high speed inside the player. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it in your player—you could end up damaging it. This player is designed for use with conventional, fully circular discs only.
Additional information 10 72 En Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.
Additional information 10 73 En Set to 4:3 (Pan&Scan) , widescreen discs are shown with the left and right sides cropped. Although the picture looks larger, you don’t actually see the whole picture. Please note that many widescreen discs override the player’s settings so that the disc is shown in letter box format regardless of the setting.
Additional information 10 74 En DVD-Video regions All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel.
Additional information 10 75 En About the audio output settings The table below shows how the audio settings you make in the Initial Settings menu ( pages 55– 56 , 66 ) affect the output from the 2 channel and the 5.1 channel analog outputs, and from the digital outputs with various types of disc.
Additional information 10 76 En Language code list Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish .
Additional information 10 77 En Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio . Aspect ratio The width of a TV screen relative to its height.
Additional information 10 78 En File extension A tag added to the end of a filename to indicate the type of file. For example, “.mp3” indicates an MP3 file. Interlaced video A method of displaying a picture in which odd-numbered lines are updated in one pass, then even-numbered lines updated in the next.
Additional information 10 79 En S1 S-video output This S-video signal format includes aspect ratio information (4:3 or 16:9) within the video signal. TVs which are compatible with S1 S- video automatically switch aspect ratio according to the signal. See also S-Video Out on page 58 .
Additional information 10 80 En DV-667A Taiwanese model only : Changing the on-screen display language to English 1 Press SETUP. The on-screen display (OSD) appears. 2 Use the /// (cursor up/down/ left/right) buttons to select ‘ ’ from the on-screen display, then press ENTER.
Additional information 10 81 En Setting the TV System (Except DV-563A and DV-667A Taiwanese model) The default setting of this player is AUTO , and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO .
Additional information 10 82 En Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 10 83 En No picture/No color. • Incorrect video connections: Check that connections are correct and that plugs are inserted fully. Also check the video cable for damage. • TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected equipment.
Additional information 10 84 En Noticeable difference in DVD and CD volume. • This is due to differences in the audio format and is not a malfunction. Cannot play multi- channel audio • Make sure that Audio Output Mode is set to 5.1 Channel ( page 66 ).
Additional information 10 85 En • Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.
Additional information 10 86 En Specifications General System . . . . . . . . . . . . . . . . . . . . . . . . . DVD player Power requirements DV-563A . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz DV-667A Taiwanese model . . . . AC 110 V, 60 Hz Other models .
Additional information 10 87 En Published by Pioneer Corporation. Copyright © 2003 Pioneer Corporation. All rights reserved DV563.book 87 ページ ２００３年４月２５日 金曜日 午後.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer DV-667A-S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer DV-667A-S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer DV-667A-S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer DV-667A-S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer DV-667A-S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer DV-667A-S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer DV-667A-S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer DV-667A-S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
