Manuale d’uso / di manutenzione del prodotto CT-W803RS del fabbricante Pioneer
Vai alla pagina of 23
STEREO DOUBLE CASSETTE DECK CT-W803RS CT-W703RS CT-W603RS 3 i tJlc • The above illustration shows CT-W803RS. • For the demo function, refer to back cover of this operating in- structions. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your unit properly.
IMPORTANT 2 FOR USE IN THE UNITED KINGDOM The wires in this mains lead are coloured in accordance with the following code: blue neutral brown live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
I CONTENTS i INSTALLATION ................................................................................ 4 MAINTENANCE ................................................................................ 4 HANDLING CASSETTE TAPES .......................
HANDLING CASSETTE TAPES A _ Turn pencil to remove tape slack el cl For erasure prevention remove ___ Tab for __ Side A Tab for Side B Cover with adhesive tape Erasure prevention tabs i Sensor holes _l.
CONNECTIONS I L?-Th Recording t cord connection cord _d REC PLAY I _Y" / TAPE REC/PLAY jacks CD' DECK SYNCHRO control cord only) Io0oO_l Stereo Amplifier CONTROL OUT jack Compact Disc Player JCD_ SYNCHRO jack • Read through the operating instructions of the stereo compo- nents which you intend to connect to this unit.
LFRONT PANEL FACILITIES The illustration shows model CT-W803RS. @ ® ®®® sensor (CT-W803RS only) ®®@@@ @ @ PlOf_JER L <::3 Aulro I_liVIInllll [::> 12,0LBY S NR / SUPER AUTO BLE O POWER STANDBY/ON switch/indicator The POWER switch activates the secondary transformer only.
FRONT PANEL FACILITIES REVERSE MODE SWITCH (REV MODE) There are three settings: One way mode z position When the switch is set to this position, playback or recording is performed on one side of the tape only. When the tape reaches the end of the side, it stops automatically (auto stop function).
l FUNCTION DISPLAY FRONT PANEL FACILITIES 1 The illustration shows model CT-W803RS. _) DECK I counter indicator Normally the tape counter or the time counter is displayed (see page 10). It flashes for 4 seconds after the power cord is con- nected to the power supply.
FRONT PANEL FACILITIES TAPE TRANSPORTATION MODE INDICATORS <CT-W803RS> • REC PLAY • .sc PLAY _ These indicators display the current tape transport mode.
REMOTE CONTROL OPERATION (CT-W803RS only) Q ® ® (_ Counter buttons (COUNTER) To use DECK I or DECK II, press one of the relevant operation buttons and then press MODE or RESET.
t PLAYBACK SINGLE PLAYBACK (Either DECK I or DECK II) o o 1. Load a prerecorded tape in DECK I or II. 2. Set the DOLBY NR ON/OFF switch and set the DOLBY NR switch. • Set the DOLBY ON/OFF switch to ON first, then select B, C or S-type NR with the DOLBY NR switch, • Always set the switch to the same position that was used for recording.
PLAYBACK SEQUENCE WITH REV MODE SWITCH SETTING The playback sequence depends on the setting of the REV MODE switch and on which playback (l_or _1) button is pressed first. The playback sequence for each possible selection is shown below. *2 In the repeat (_---J) mode, relay playback is always begun from the forward direction.
I RECORDING SINGLE RECORDING I CT-W803RS/CT-W703RS: both Deck I and II l CT-W603RS: Deck II only 42 recording without Dolby NR, set the REC LEVEL control so that the "-3 dB" indicator lights, and the "0 dB" indicator lights occasion- ally at peaks.
RECORDING To erase the recorded contents of a tape, load the tape in DECK II (or I) and follow the procedure below. l il l "lit I _ _ I _ _ _ _,''" .] .] (3) (2)3 1 2 1. Set the REC LEVEL control to the MIN position. 2. Press the recording (e) button.
i RECORDING RELAY RECORDING (CT-W803RS/ CT-W703RS) (from DECK I to DECK II) 2 3 4 5 7 1 1. Load tapes for recording in DECK I and DECK II. 2. If you use AUTO BLE tuning, see page 15. 3. Set the DOLBY NR ON/OFF switch and set the DOLBY NR switch. 4. Set the REV MODE switch to _-_.
To stop recording temporarily Press the pause (11) button on either deck (both decks pause). • To resume recording, press the pause (Ill button again. To stop recording Press the stop ( • ) button on either deck (both decks stop). NO TES: • When either tape reaches the end, parallelrecording is complet- ed.
TAPE COPYING (from DECK I to DECK II) ] 42 1 1 • The tape copying function permits you to copy the contents of a tape from DECK I to DECK II. • The SYNCHRO COPY button is used to select either normal speed copying, or high-speed copying (copying at twice the nor- mal playback speed).
TROUBLESHOOTING J Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
TROUBLESHOOTING Symptom POOR SOUND QUALITY Unstable or interrupted sound No high frequencies High frequencies are emphasized. Sound from previous recordings remains when rerecording a tape. The sound is distorted. Too much noise Cause • The head, pinch rollers and capstans are dirty.
_SPECIFICATIONS System ....................................................... 4-track, 2-channel stereo Heads CT-W803RS/CT-W703RS .................................. "Hard Permalloy" recording/playback head × 2 "Ferrite" erasing head × 2 CT-W603RS .
zz _-.- RRB1 lqJ ' E_ n.
I About the Demo mode Press the DECK II counter reset button (RESET) and the DECK II counter mode button (TIME/COUNT) simultaneously to set the demonstration mode. To cancel the demonstration mode, press any one of the buttons enclosed in the dotted lines above.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer CT-W803RS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer CT-W803RS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer CT-W803RS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer CT-W803RS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer CT-W803RS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer CT-W803RS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer CT-W803RS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer CT-W803RS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
