Manuale d’uso / di manutenzione del prodotto BDP-51FD del fabbricante Pioneer
Vai alla pagina of 72
Operating Instructions Blu-ra y Disc PLA YER.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance.
CAUTION This pr oduct is a class 1 lase r pr oduct, but this pr oduct contains a lase r diode highe r than Class 1. T o ensu r e continued safety, do not r emove any cove r s o r attem p t to gain access to the inside of the pr oduct. Ref e r all se r vicing to qualified p e r sonnel.
! .
S001_En Selecting fine audio equi p ment such as the unit you’ve just p u r chased is only the sta r t of you r musical enjoyment. Now it’s time to conside r how you can maximize the fun and excitement you r equi p ment offe r s.
6 En Contents 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remo te control . . . . . . . . . . . . . . . . . . . 7 Types of discs/files that can be pla yed.
01 7 En Chapter 1 Before you start What’s in the box Putting the batteries in the remote control 1 Open the rear cover. 2 Insert the batteries (AA/R6 x 2). Insert as indi cated by the / marks into the battery compartment. 3 Close the rear cover.
01 8 En Types of discs/files that can be played Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played. Disc type Logo Application format BDMV 1 1. Including the AV CHD format. BDAV DVD-Video DVD VR CD-DA DTS-CD DATA-DISC 2 2.
01 9 En Discs that cannot be played • HD DVDs •D V D A u d i o d i s c s •D V D - R A M d i s c s • Non-finalized DVD-R/DVD-RW /DVD+R/DVD+RW discs in the DVD-Video format and AVCHD format • Non-finalized Dua l Layer DVD-R discs in the DVD VR format •S A C D s •V i d e o C D s •S V C D s This player conforms to NT SC stan dards.
01 10 En Playing DVDs • DVD-Video can be played. • DVD-R/-RW/+R/+RW discs reco rded in the DVD-Video format can be played (finalize them before playing them on this player). • DVD-R/-RW discs reco rded in the VR format (Video Recording format) can be played.
01 11 En Part Names and Functions Remote Control 1 STANDBY/ON Press to turn the power on and off. 2 TV CONTROL Your TV can be controlle d using the player’s remote control (page 22). – Press to turn the TV’s power on a nd off. INPUT SELECT – Press to switch the TV’s input.
01 12 En 18 OUTPUT RESOLUTION Use these to switch the output video resolution from the HDMI OUT or COMPONENT VIDEO output terminals ( page 25). 19 PLAY MODE Press to display/hide the Play Mode screen (page 29). 20 POP UP MENU/M ENU Press to display the BD-ROM or DVD-Video menus.
01 13 En Front Panel Display 1 Lights during playback. 2 Lights when playback is paused. 3P Q L S Lights when the PQLS function is activate d (page 15). 4 Character display Displays the title/chap ter/track numbe r, elapsed ti me, etc. 5 24HZ/50 HZ/60HZ The frequency of the video fram e or field bei ng output li ghts.
02 14 En Chapter 2 Connecting up Connecting a TV Be sure to turn off the power and un plug the power cord from the power outlet whenever making or changing connections. Note • Ma ke the settings in the Setup N avigator menu according to the type of cable connected (page 20).
02 15 En Audio signals that can be transferred with the player’s HDMI output terminal •D o l b y T r u e H D •D o l b y D i g i t a l P l u s •D o l b y D i g i t a l • DTS-HD Ma ster Au.
02 16 En Connecting using a commercially available component video cable Caution • When co nnected to the TV using a component video cable (commercially available), video signals are not output with a resolution of 1080/60p or 1080/24p. • Depending on the output video resolution setting, the picture may not be output (page 25).
02 17 En Caution • Video signal s are only output wi th a resolution of 480/60i wh en connected using a video cable (i ncluded) or an S-Video cable (commercially a vailable).
02 18 En Connecting using audio cables Caution • For DTS -HD Master Audio and DTS-HD High Resolution Audio signals, the DTS Digital Surround signals are converted to linear PCM for output (page 50).
02 19 En Connecting the power cord Connect the power cord after a ll the connections between devices have been completed. R R AUDIO OUT (2 ch) AUDIO OUT (7.
03 20 En Chapter 3 Getting Started Making settings using the Setup Navigator menu Be sure to perform th ese settings when using the player for the first time. Caution • Before turning on the power, check that the connections between the player and o ther devices are correct.
03 21 En – When connecting using compone nt video cables, an S-Video cable or a video cable to watch the picture, connect to a n AV receiver or amplifier, o r a TV using either analog audio cables (7.1 channels or 2 ch annels), an optic al digital au dio cable or a coaxial digital audio cable (page 18).
03 22 En 10 Finish the Setup Navigator menu. Use / to select Finish , the n press ENTER . To redo the settings from the start, select Go Back . Depending on the ou tput terminal setting of step 4 or the HDMI cable being used, it may happen that no picture and/or so und is output.
03 23 En Using the TOOLS menu Various function s can be called out according to the player’s operating status. 1 Display the TOOLS menu . Press TOOLS . 2 Select and set the ite m. Use / to select, then press ENTER . Note • Items that cannot be cha nged are displayed in gray.
03 24 En Erasing the additional data from BD-ROMs When a BD-ROM is played, addition a l data may be stored in the player’s memory (local storage). If the message indicating low memory (local storage) appe ars, erase the BDMV data.
03 25 En Switching the output video resolution Use the procedure below to switch the output video resolution from the various video ou tp ut terminals. Press OUTPUT R ESOLUTION. The current output video resolu tion is displayed on the TV screen and on the player’s fro nt panel display.
04 26 En Chapter 4 Playback Playing discs or files This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 8. For the types of files that can be played, see Playable files on page 10.
04 27 En Playing specific ti tles, chapters or tracks Input the number of the title, chap ter or track you want to play. • Use the number buttons (0 to 9) to input th e number, then press ENTER . Note • For some disc s, it is not poss ible to specify and play titles, chapters or tracks.
04 28 En Switching the camera angles For BD-ROM and DVD-Video disc s on which mu ltiple angles ar e recorded, the angles can be switched during playback. During pl ayback, press ANGLE. • The cu rrent angle and total n umber of recorded angles are displayed on the TV screen and o n the player’s front panel display.
04 29 En Note • The typ es of recorded audio streams/ channels depend on the disc. • If the audio stream/channel is not switched when AUDIO is pressed, switch it from the menu screen. • Some BD-ROMs do not in clude secondary audio. • Seconda ry audio mark is not displayed if Angle/ Seconda ry Indicator is set to Off (page 42).
04 30 En 3 Input the time. Use the number buttons (0 to 9) or / to input the time. Use / to move the cursor. Note • To play from 4 5 minutes, input 0 , 0 , 4 , 5 , 0 and 0 , then press ENTER . • To play from 1 hour 20 minutes, input 0 , 1 , 2 , 0 , 0 and 0 , then press ENTER .
04 31 En Playing a specific section within a title or track repeatedly (A-B Repeat) Use this procedure to play a specif ic sectio n within a ti tle or track repeate dly. 1 During playb ack, press PLAY MODE to display the Play Mode screen. The Play Mode screen can also be displayed by sele cting Play Mode from the TOOLS menu.
04 32 En Playing in random order (Random Play) Use this procedure to play the tr acks or files in random order. 1 During playb ack, press PLAY MODE to display the Play Mode screen. The Play Mode screen can also be displayed by sele cting Play Mode from the TOOLS menu.
04 33 En About Play Mode t ypes The functions that can be used di ffer according to the typ e of disc and fil e. In some cases, some of the functions cannot be us ed. Ch eck the usable functions on the table below. Play Mode type Mark 1 1. During playback in a Play Mode, the type of Play Mode is in dicated by the mark.
04 34 En Playing from the Home Media Gallery The Home Media Gallery lets you displa y a list of the titles, tracks or files recorded on the disc. The di scs that can be pla yed from the Home Media Gallery are a s shown below (see also page 8 ).
04 35 En 3S e l e c t M u s i c . Press ENTER . 4 Select Fol ders or All Songs. Use / to select, then press ENTER . • Folders – The files in the selected folder are displayed. • All Songs – All the recorded files are displayed. If you have selected All Songs , proceed to step 6.
04 36 En 3 Select the track/fi le to be adde d. Use / to select. 4 Press TOOLS to display the TOOLS menu. 5 Select Add to HMG Playlist. Use / to select, then press ENTER . The track or file selected in st ep 3 is added to the HMG Playlist.
05 37 En Chapter 5 Adjusting audio and video Adjusting the video The quality of the playback picture can be adju sted according to the TV you are using. 1 During playback, press VIDEO ADJUST to display th e Video Adjust screen. The Video Adjust screen can al so be displayed by selecting Video Adjust fr om the TOOLS menu.
05 38 En Closing the Video Adjust screen Press HOME MENU . About Pure Cinema There are two types of video signals: • Video materia l – Video signals recorded at 30 frames/second • Film m.
06 39 En Chapter 6 Advanced settings Changing the settings (Initial Setup) Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu scre en. Press HOME MENU . 2 Select and set Initia l Setup. Use / to select, then press ENTER .
06 40 En Note • Items that cannot be changed are indicated in gray. The it ems that can be selected depen d on the player’s status. • The factory default settings are indicated in bold. Setting Options Explanation Video Out TV Aspect Ratio 16:9 (Widescr een) Select this when connected to a wide (16:9) TV.
06 41 En HDMI HDMI High-Speed Transmission On Se lect this when connected with a High Speed HDMI™ ca ble (page 15). Off Select this when connected with a Standard HDMI™ cable (page 15). The player’s setting screen is close d if the output video resolution is switc hed by changing the HDMI High-Speed Transmis sion setting.
06 42 En Options Output Terminal Priority Select the terminals for output ting video and audio signals with priority. For details, see Changing the terminals for outputting video and audio signals (Output Terminal Priority) on page 48. On Screen Display On Select this to display the operation indi cators (Play, Stop, etc.
06 43 En Changing to other language at language setting Note •R e f e r t o Language Code Table on page 56. • If a la nguage not recorded on the BD/DVD is set, one of the recorded languages is automa tica lly selected and played. 1 Select and set Other.
06 44 En Adjusting the output level of the various speakers (Channel Level) Adjust each output level of the different speakers by using test tones. This setting is only vali d for analog audio outputs. 1 Select a nd set Speakers. Use / to select, then press ENTER .
06 45 En 3 Input the password . Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. 4 Re-input th e password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set.
06 46 En 3 Input the password . Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. 4 Change the ag e. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set.
06 47 En 3 Input the password . Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. 4 Change the le vel. Use / to change, then press ENTE R to set . Note • The level ca n be set to Off or between Level1 and Lev el8 .
06 48 En 3 Input the password . Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. 4 Change the country/area code. Use / to change, then press ENTE R to set . To change the country/area co de using numbers 1U s e / to select Numb er.
06 49 En 3 Select the terminal for outputting video signa ls. Use / to select, then press . When a digital output is selected for the video outp ut terminal, Video is fixed at HDMI and cannot be changed. When an analog ou tput is select ed fo r the video output te rminal, Component Vid eo or S-Video/Vi deo can be selected for Video .
06 50 En About th e audio output settin gs The audio signals that are outp ut differ according to the audio format recorded on the disc and the player’s settings.
07 51 En Chapter 7 Additional information Troubleshooting Incorrect operation i s often mistaken for trouble or malfunction . If you think that there is someth ing wrong with this componen t, check the points below. Sometimes the trouble may lie in another component.
07 52 En Picture is disturbed durin g playback. Picture is dark. • This player su pports Macrov ision analog copy protection technology. With some TVs (such as with built-in vide o deck), the picture wil l not be disp layed properly when the copy protected DVD title is pl ayed .
07 53 En When connected usin g an HDMI cable Multi-channel sou nd is not output (conti nuous). Is multi-channel sound selected? Use the menu scre en or AUDIO to switch the dis c’s sound to multi-channel.
07 54 En No picture is displayed. Is the HDMI in dicator lit? • If the H DMI indica tor is not lit, read the HDMI device’s operating instructions and sw itch to the proper input. • If the HDMI indicator is lit, use OU TPUT RESOLUTION to switch the output vide o resolution ( page 25).
07 55 En Others Problem Check Remedy The power turns off automatic ally. Is Auto Power Off set to On ?I f Auto Power Off is set to On , the power turns off automaticall y if no opera tion is perfor med for over 3 0 minutes (page 42). Is HDMI Control set to On ? The player’s power ma y turn of f together with the power of th e connected TV .
07 56 En Language Code Table and Country/Area Code Table Language Code Table Language name (langua ge code), input code Country/Area Code Table Country/Area name, input code, Country/Area code Japanes.
07 57 En Specifications Note • The specifications and design of this pr oduct are subject to ch ange without notice. • This produc t includes FontAvenue ® fonts licensed by NEC Corporation. FontAvenue is a registered trademark of NE C Corporation.
07 58 En Cautions on use Moving the player If you need to move this unit, first rem ove the disc if there’s one loaded, and close the disc tray. Next, press STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel disp lay goes off.
07 59 En Handling discs Do not use damaged (cracked or warped) discs. Do not scratch the disc’s signal surface or let it get d irty. Do not load more than one disc into the player at a time. Do not glue paper or put stickers onto the disc, or use a pencil, ball- point pen or o ther sharp- tipped writin g instrument.
07 60 En Deep Color This is one of the ca pabilities of HDMI™. The player s supporting Deep Color can transmit a video si gnal with a color bit depth of greater than 8 bits per color component. Su btle color gradations can be reproduced when connecte d to a TV that s upports Deep Color.
07 61 En S-Video output An output t erminal for tra nsmitting sep arate lum inance (Y) and color (C) signals over a single cord. It offers clearer picture s than the composite video output. Secondary audio Some BD-ROMs include sub audio streams mixed with the main audio.
07 62 En Licenses The licenses for the software used on this player a re shown below. libxml2 The MIT License Copyright © <year> <copyright holders> Permission is hereby granted, free.
07 63 En Introduction The FreeType Project i s distributed in several archive packages; so me of them may contain, in addition to the FreeType font eng ine, various tools and c ontributions which rely on, or relate to, the FreeType Project.
07 64 En libpng versions 0.89, June 199 6, through 0.96, May 1997, are Copyright © 1996, 199 7 An dreas Dilger Distributed according to the same disclaimer and license as libpng- 0.
07 65 En In order to support file conversion and viewing software, we have included considerable function ality bey ond the bare JPEG codi ng/decoding capability; for example, the color quantization modules are not strictly part of JPEG decoding , but they are essential for output to colormapp ed file format s or colormapped displays.
07 66 En The TIFF 6.0 file format specif ication can be obtained by FTP from ftp://ftp.sgi.com/graphics/ti ff/TIFF6.ps.gz. The JPE G incorp oration scheme found in the TIFF 6.0 spec of 3-June-92 ha s a number of serious proble ms. IJG does n ot recommend use of the TIFF 6.
07 67 En Activities other than copying, distribution and modification are not covered by this L i cense; they are outs ide its scope. The a ct of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having b een made by running the Program).
07 68 En 12. IN NO EVENT UNLESS REQUIRED BY APPL ICABLE LAW OR AGREED TO IN WRITING WI LL ANY COPYRIGHT HOLDER, OR ANY OTHER P ARTY WHO MAY MOD IFY AND/OR REDISTRIBUT E THE PROGRAM AS PERMI TTED ABOVE.
07 69 En TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or othe r program which contains a notice placed by the copyright hol.
07 70 En It may happen that this requirement contra dicts the license restrictions of other pr oprietary libraries tha t do not normally ac company the operating system. Such a contradiction means you c annot use both them and the Li brary together in an executable that you distribute.
07 71 En [Notice on GNU General Public License] This product include the software licensed for use und er the terms of a GNU General Public License. A copy of the corresponding source code can be obtained by being charged the fee for distribution. To obtain a copy, contact your loca l Pioneer Customer Support Center.
Should this pr oduct r equi r e se r vice in the U.S.A. and you wish to locate the nea r est P ionee r Autho r ized Inde p endent Se r vice Com p any , o r if you wish to p u r chase r e p lacement p a r ts, o p e r ating inst r uctions, se r vice manuals, o r accesso r ies, p lease call the numbe r shown below .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer BDP-51FD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer BDP-51FD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer BDP-51FD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer BDP-51FD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer BDP-51FD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer BDP-51FD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer BDP-51FD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer BDP-51FD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
