Manuale d’uso / di manutenzione del prodotto Moltio HD8769 del fabbricante Philips Saeco
Vai alla pagina of 88
English USER MANU AL Read carefully befor e using the machine. Register your pr oduct and get suppor t at www .philips.com/w elcome T ype HD8769 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing , other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH Congratulations on y our purchase of a S aeco Moltio One T ouch Cappuc cino full automatic co ee machine! T o fully bene t from the support that Saeco o ers, please register your product at www .philips.com/w elcome . This user manual applies to HD8769.
3 ENGLISH MILK CARAFE ..................................................................................................33 Filling the Milk Carafe ....................................................................................................... .
4 ENGLISH IMPORT ANT Safety instructions This machine is equipped with safety featur es. Nevertheless read the safety instructions carefully and only use the ma- chine as described in these instructions to avoid ac cidental injur y or damage. Keep this user manual for futur e reference .
5 ENGLISH 5 • Remov e the mains plug from the w all socket: - If a disturbance occurs . - If the machine will not be used for a long time. - Before cleaning the machine. Pull on the plug , not on the mains cord . D o not touch the mains plug with wet hands .
6 ENGLISH • Do not place the machine on a hot plate , directly nex t to a hot ov en, heat er or similar sourc e of heat . • Only put co ee beans into the co ee bean hopper . If ground c o ee, instant co ee or any other substance is put in, it may damage the machine .
7 ENGLISH 7 C ompliance with standar ds The machine c omplies with ar t.13 of the Italian L egislative Decree dat ed 25 July 2005, no. 151 “Implemen tation of the directives 2005/95/EC, 2002/96/EC a.
8 INST ALLA TION Product overview 17 21 22 19 23 20 33 18 12 3 11 10 12 13 14 5 6 7 8 9 24 26 27 29 30 15 25 28 16 31 32 4c 4b 4a.
9 ENGLISH 9 General description 1. Co ee bean hopper lock ing/removal selector switch 2. Pre-ground co ee compar tment 3. Storage area for cups 4a. Co ee bean hopper 4b . Co ee bean hopper tray 4c. Co ee bean hopper lid 5. Control P anel 6.
10 ENGLISH PREP ARING FOR USE Machine Packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the packaging material for possible future transport. Machine Installation 1 Remove the drip tray with g rill from the packaging.
11 ENGLISH 11 5 Push gently on the edge of the water tank door to r elease the hand- grip. 7 Rinse the water tank with fresh water . 8 Fill the wat er tank with fresh water up to the M AX level and r einsert it back into the machine. Make sure it is fully inserted.
12 ENGLISH 13 Switch the pow er button to “I” to turn on the machine. The red led next to the “ ” button blinks. Y ellow 14 T o turn on the machine, simply press the “ ” button. T he control panel indicates that the circuit must be primed.
13 ENGLISH 13 USING THE MACHINE FOR THE FIRST TIME When using the machine for the rst time, the follo wing activities need to happen: 1) Y ou need to prime the circuit; 2) The machine will perform an automatic rinse/ self-cleaning cycle; 3) Y ou need to initiate a manual rinse cycle.
14 ENGLISH Automatic rinse/self-cleaning cycle When warm-up is completed, the machine automatically performs a rinse/ self- cleaning cycle of the internal circuit with fresh water . This takes less than a minute. 1 Place a container under the co ee dispensing spout to catch the small amount of water which will be dispensed.
15 ENGLISH 15 3 Select the pre -ground co ee brewing function by pressing the “ ” button. The machine shows this display . Note: Do not add pre- ground co ee into the compar tment. 4 Press the “ ” button. T he machine starts dispensing water .
16 ENGLISH 10 Press the “ ” button to star t dispensing hot water . Green 11 This icon is display ed. The machine reminds you to install the water dispensing spout. Check that the water dispensing spout is correctly installed. Pr ess “ ” to con rm.
17 ENGLISH 17 14 At the end, ll the water tank again up to the MAX level . Now the ma- chine is ready for br ewing co ee. Y ou will see the display as shown at the left. Note: When you haven ’t used the machine for 2 or more w eeks, the machine will automatically perform an automatic rinse/self-cleaning c ycle after you switch it on.
18 ENGLISH Measuring and Progr amming W ater Hardness Measuring water hardness is very impor tant for de ning the frequency in which the machine has to be descaled and to install the “INTENZA+” water lter (for more detail on the wat er lter see next chapter).
19 ENGLISH 19 8 Press the “ ” button to exit the programming menu. No w the ma- chine is ready to brew . “INTENZA+” water lter installation W e recommend you t o install the “INTENZA+” water lter as this prevents limescale to build up in your machine and preserves a more intense ar oma to your co ee.
20 ENGLISH 2 Remove the “INTENZA+” water lter from its packaging, immerse it ver- tically (with the opening positioned upwards) in cold water and gently press the sides so as to let the air bubbles out.
21 ENGLISH 21 10 Press the “ ” button to select “ON” and press the “ ” button to con- rm. Y ellow Replacing the “INTENZ A+” water lter When the “INTENZA+” water lter needs to be replaced with a new one , the following icon is displa yed.
22 ENGLISH Y ellow Green 5 T o exit, press the “ ” button. Now the machine is r eady to brew . The machine is now prog rammed to manage a new lter . Note: If the “INTENZA+” water lter is already installed and you want to remo ve but not replace it, select the “OFF” option instead.
23 ENGLISH 23 2 Lift the sides of the co ee bean hopper with both hands as shown in the image. Caution: Do not remov e the bean hopper in a di erent w ay to av oid spilling co ee beans . 3 After removal put the prot ection cover on the machine to prev ent dust.
24 ENGLISH 3 Remove an y beans from the co ee bean hopper compartment. 4 Inser t the co ee bean hopper into the compar tment as shown on the image.
25 ENGLISH 25 Co ee bean selection This function allows you to optimiz e the grinding for selected type of cof- fee beans. Y ellow Green Green Green 2 Press the “ ” button to access the programming menu. Scr oll the pages by pressing the “ ” button until the following icon is display ed.
26 ENGLISH Co ee emptying cycle If you want to change co ee beans, we recommend that you empty the co ee duct and grinder. In this way y ou will taste the full aroma of the new co ee beans. For this f ollow the steps below . 1 Inser t the co ee bean hopper with the new co ee beans.
27 ENGLISH 27 ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best tasting co ee possible. Saeco Adapting S ystem Co ee is a natural product and its charac teristics may change accor ding to its origin, blend and roast.
28 ENGLISH 3 The ref erence marks in the compartment for the co ee bean hopper indicate the grind setting. There are 5 di erent grind settings to choose from position1 for coarse g rind - lighter taste to position 2 f or ne grind - bolder taste.
29 ENGLISH 29 Adjusting the co ee dispensing spout The height of the dispensing spout can be adjusted to better t the dimen- sions of the cups that you wish to use. Move the dispensing spout up or down with your ngers to adjust its height as shown in the image.
30 ENGLISH Adjusting the C o ee Length The machine allows y ou to adjust the amount of brewed c o ee according to your taste and/or the size of y our cups. Each time the “ ” or “ ” button is pressed , the machine brews a pre-set amount of co ee.
31 ENGLISH 31 ESPRESSO AND C OFFEE BREWING Before br ewing the co ee, make sure that there are no warnings shown on the control panel, and that the wat er tank and co ee bean hopper are lled. Espresso and co ee brewing using c o ee beans 1 Place 1 or 2 cups under the dispensing spout.
32 ENGLISH Espresso and co ee brewing using pr e -ground co ee This function allows you to use pr e- ground and deca einated co ee. With the pre-ground co ee func tion you can only brew one co ee at a time. 1 Press the “ ” button to select the pre -ground co ee func tion.
33 ENGLISH 33 MILK CARAFE This chapter explains how to use the milk caraf e to prepare a cappuccino or frothed milk. Note: Before using the milk caraf e, clean it thoroughly as described in the “Clean- ing and Maintenance ” chapter . W e recommend lling it with cold milk (approx.
34 ENGLISH Inserting the Milk Carafe 1 If installed, remove the wat er dispensing spout as shown in the gure: - P ress the two buttons on the side to unlock it and lift it slightly ; - P ull the water dispensing spout to remove it. 1 2 2 Slightly tilt the milk carafe.
35 ENGLISH 35 Emptying the Milk Carafe 1 Press the r elease buttons to allow the r emoval of the top of the carafe . 2 Lift the top of the carafe. Empty the milk carafe and clean it pr operly . Note: After each use, clean the milk carafe as described in the “Cleaning and Maintenance ” chapter .
36 ENGLISH CAPPUCCINO BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Danger of burns! W ait until the end of the cycle before removing the milk caraf e. 1 Fill the milk caraf e with milk . The level must be between the minimum (MIN) and maximum (MAX) indication on the milk caraf e.
37 ENGLISH 37 5 Press the " "button to start the dispensing. 7 The following ic on is displayed during pr e-heating time required by the machine. Y ellow 8 When the machine shows the follo wing icon, the machine pours the milk. T he pouring can be stopped by pressing the “ ” button.
38 ENGLISH Adjusting the cappuccino length Each time the “ ” button is pressed, the machine pours a pre-set quantity of cappuccino into the cup . The machine allows y ou to adjust the amount of brewed cappuc cino ac- cording to y our taste and the size of your cups .
39 ENGLISH 39 LA T TE MAC CHIA T O BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Danger of burns! W ait until the end of the cycle before removing the milk caraf e. 1 Fill the milk caraf e with milk .
40 ENGLISH Y ellow 7 The following ic on is displayed during pr e-heating time required by the machine. 8 When the machine shows the follo wing icon, the machine pours the milk. T he pouring can be stopped by pressing the “ ” button. Green Green 9 Once the milk froth has been poured , the machine brews co ee.
41 ENGLISH 41 Adjusting the Latte Mac chiato length Each time the “ ” button is pressed, the machine pours a pre-set quantity of Latte Macchiato into the cup . The machine allows you t o adjust the amount of brewed Latte Macchiat o according to y our taste and the size of your cups.
42 ENGLISH MAKING FRO THED MILK W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Danger of burns! W ait until the end of the c ycle befor e removing the milk car afe. 1 Fill the milk caraf e with milk . The level must be between the minimum (MIN) and maximum (MAX) indication on the milk caraf e.
43 ENGLISH 43 5 Press the “ ” MENU button. The follo wing icon is displayed . Green Green 6 Press the “ ” button. T he following icon is displa yed. 7 Press the “ ” button to select frothed milk. Y ellow 9 The following ic on is displayed during pr e-heating time required by the machine.
44 ENGLISH Adjusting the frothed milk length Each time this function is selected, the machine pours a pre-set amount of frothed milk into the cup . The machine allow s you to adjust the amount of frothed milk accor ding to your taste and the siz e of your cups.
45 ENGLISH 45 Green 7 The following ic on is displayed during pr e-heating time required by the machine. 8 When the desired amount of frothed milk is r eached, press the “ ” button. Now the “frothed milk ” button is programmed. Ev ery time it is pressed, the machine will brew the same amount of frothed milk that was prog rammed.
46 ENGLISH 3 Place a container under the hot water dispensing spout. 4 Press the “ ” MENU button. The follo wing icon is displayed . 6 Press the " "button t o start the dispensing. 7 This icon is display ed. The machine reminds you to install the water dispensing spout.
47 ENGLISH 47 Green Y ellow 8 The following ic on is displayed during pr e-heating time required by the machine. 9 Pour the desir ed amount of hot water .
48 ENGLISH 3 Empty and clean the drip tray: - P ress the side buttons. - Remo ve the drip tray . Note: Empty the drip tray also when the full drip tray indicator is raised. 2 Empty and clean the co ee residues drawer locat ed inside of the ma- chine.
49 ENGLISH 49 Daily cleaning of the water tank 1 Remove the small white lter or the INTENZA+ water lter (if installed) from the water tank and wash it with fresh wat er . 2 Put the small white lter back or the INTENZA+ water lter (if installed) in its housing by gently pressing and turning it at the same time.
50 ENGLISH 6 Pull the milk carafe dispenser t o the left up to the “ ” icon. 4 Remove the lid and ll the milk carafe up to the MAX level with fr esh water . 5 Put the lid back onto the milk caraf e. 7 Place a container under the dispensing spout.
51 ENGLISH 51 10 The machine reminds you t o insert the carafe and pull out the milk carafe dispenser . 9 Press the “ ” button. T he following icon is displa yed. Press the “ ” button to select frothed milk. 11 The following ic on is displayed during pr e-heating time required by the machine.
52 ENGLISH W eek ly cleaning of the milk carafe The weekly cleaning is more thorough as it r emoves any milk r esidues from the dispenser . 1 Press the r elease buttons and remov e the top of the carafe. W eek ly Cleaning of the Machine 1 Clean the seat of the drip tray .
53 ENGLISH 53 4 Remove the suction tube (A). 5 Remove the tting (B) from the milk frother by pulling it outwards. 6 Detach the lid (C) from the milk carafe dispenser by pulling it do wn while slightly pressing on the sides. 7 F urther disassemble as shown in the image.
54 ENGLISH 8 Pull the tting (E) out wards from the milk fr othing device. E 9 Clean all the parts thoroughly with lukewarm water . Note: Y ou can also clean these parts in the dishwasher .
55 ENGLISH 55 4 T o remov e the brew group , press the «PUSH» button and pull it by the handle. 5 Thoroughly wash the brew g roup with fresh, lukewarm water and car e- fully clean the upper lter . Caution: do not use detergent/soap to clean the brew gr oup .
56 ENGLISH 10 Make sure the hook to lock the brew gr oup is in the correct position by rmly pressing the “PUSH” button until it locks into place . Check if the hook is at the top end position. If it is not, please try again. 11 Inser t the brew group in its seat again until it locks int o place without pressing the “PUSH” button.
57 ENGLISH 57 W eek ly cleaning of the co ee bean hopper , the tra y and the com- partment Clean the co ee bean hopper, the tra y and the co ee bean hopper com- partment once a week with a cloth to remove an y co ee residuals or dust. T o remov e the tray push the hooks on the bottom of the co ee bean hop- per .
58 ENGLISH Monthly cleaning of the milk caraf e In the monthly cleaning cycle we recommend using the “Saeco Milk Circuit Cleaner ” to keep the entire circuit clean of milk residues . Y ou can purchase separately the “Saeco Milk Circuit Cleaner ” .
59 ENGLISH 59 9 Once the machine stops dispensing water , repeat steps 5 - 8 until the carafe is emptied. W arning: Never drink the solution dispensed during the proc edure. Green 5 Press the “ ” MENU button. The follo wing icon is displayed . Y ellow 8 The following ic on is displayed during pr e-heating time required by the machine.
60 ENGLISH 11 Remove the milk caraf e and the container from the machine. 12 Rinse and ll the milk carafe with fresh water up to the M AX level . 13 Inser t the milk carafe into the machine . Pull the milk carafe dispenser t o the left up to the “ ” icon.
61 ENGLISH 61 Y ellow 17 The following ic on is displayed during pr e-heating time required by the machine. 18 Once the machine stops dispensing water , repeat steps 13 - 16 until the carafe is emptied. 19 Remove the milk caraf e and the container from the machine.
62 ENGLISH 2 Lubricate the shaft too . 3 Inser t the brew group in its seat until it locks int o place (see “ Weekly Cleaning of the Brew Group ” chapter). Insert the co ee residues drawer . 4 Close the service door . Inser t the co ee grounds drawer .
63 ENGLISH 63 1 Place a container under the co ee dispensing spout. 2 Make sure the water tank is lled with fresh water up to the “MAX” level. 3 Put a “Co ee Oil Remover ” tablet in the pre -ground co ee compar t- ment. 4 Press the “ ” button one or more times to select the pre -ground cof- fee function.
64 ENGLISH 8 Let the solution take e ect for approximately 15 minut es. Make sure you discard the dispensed water . 9 Switch the pow er button on the back of the machine to “I” . T o turn on the machine press the “ ” button. W ait until the automatic rinse cycle has been completed.
65 ENGLISH 65 Y ellow DESCALING The descaling process takes appr ox. 35 minutes . Limescale builds up inside the machine during use. It needs to be remov ed regularly as it may clog the water and co ee circuit of your machine. The machine tells you when descaling is needed.
66 ENGLISH 2 Inser t the empty milk carafe. 3 Remove the “INTENZA+” water lter from the water tank if it was in- stalled and replace it with the small white original one . Place the water tank back into the machine. 5 Press the “ ” button.
67 ENGLISH 67 10 Pull the milk carafe dispenser to the left up to the " " ic on. Place a large container (1.5lt) under both the milk carafe dispenser and the dispensing spout. 11 Press the “ ” button to star t the descaling cycle. 12 The machine will start dispensing the descaling solution at inter vals.
68 ENGLISH 19 When this icon is displayed , the water tank is empty . Repeat steps 14- 18. Then continue to step 20. 22 When the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displa yed. P ress the " " button to quit the descaling cycle.
69 ENGLISH 69 25 Remove and empty the container 26 Empty the drip tray and place it back. 27 The descaling cycle is now complete . 28 Remove the small white water lter and place back the “INTENZA+” water lter into the water tank if it was installed.
70 ENGLISH Y ellow Y ellow Y ellow Y ellow Y ellow Y ellow "INTENZA+" W ater Filter This function allows you to manage the “INTENZA+” water lter . F or more details, see the chapter r elated to lter handling. Descaling cycle This function allows you to run the descaling cycle.
71 ENGLISH 71 How to program y our machine In this example, it is shown how to pr ogram the display contrast. P roceed in the same way to program the other functions. The programming menu can only be acc essed when the machine is on and shows this display .
72 ENGLISH 5 Press the “ ” and “ ” buttons to increase or decr ease the value of the function. 6 When the display value is changed, the “OK” message appears. Press the “ ” button to con rm the change. Y ellow 7 Press the “ ” button to exit the programming menu.
73 ENGLISH 73 MEANING OF THE DISPLA Y SYMBOLS This machine is equipped with a colour-coded system to make the user’ s understanding of the display signals easier .
74 ENGLISH Ready Signals (Green C olour) The machine is brewing two cups of co ee. Co ee brewing using pre -ground co ee in progress. The machine is programming the amount of co ee to brew . Fr othed milk brewing . The machine is brewing cappuccino .
75 ENGLISH 75 W arning Signals ( Y ellow Colour) The machine is heating up to brew bev erages or dispense hot water . The machine is heating up during beverages prog ramming. The machine is performing the rinse cycle. W ait until the machine has com- pleted the cycle.
76 ENGLISH W arning Signals (Red Colour) Close the service door . Fill the c o ee bean hopper . The brew gr oup must be inserted into the machine. Inser t the co ee grounds drawer . Empty the co ee grounds drawer and the c o ee residues drawer .
77 ENGLISH 77 TROUBLESHOOTING This chapter summarizes the most common pr oblems you could encoun- ter with your machine. If you ar e unable to solve the problem with the information below , visit ww w .philips.com/support for a list of frequently asked questions or contact the Philips Saeco hotline in your country.
78 ENGLISH Note: These problems can be consider ed normal if the co ee blend has been changed or if the machine has just been installed. In this case wait until the machine per forms a self-adjusting operation as described in section "Saeco Adapting Syst em" .
79 ENGLISH 79 ENERGY SA VING Stand-by The Saeco full automatic espresso machine is desig ned for energy sa ving, as stated by the Class A energy label . After 30 minutes of inactivity the machine turns o automatically (unless you have di erently programmed the stand-by time).
80 ENGLISH TECHNICAL SPECIFICA TION The manufacturer reserves the right to make changes to the technical speci cations of the product. Nominal V oltage - Power Rating - Po wer Supply See label on the inside of the service door Housing Material ABS - Thermoplastic Size (w x h x d) 256 x 350 x 470 mm W eight 8.
81 ENGLISH 81 ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenanc e products only . Y ou can purchase these at the Philips online shop at www.
82 ENGLISH MACHINE A C CESSORIES - Removable co ee bean hopper CA6803 - Maintenance Kit CA 6706 - M ilk Circuit Cleaner CA6705.
83.
.
.
www.philips.com/saeco The manufacturer reserves the right to make changes without prior notice. Rev.00 del 05-02-13 02 EN 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Philips Saeco Moltio HD8769 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Philips Saeco Moltio HD8769 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Philips Saeco Moltio HD8769 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Philips Saeco Moltio HD8769 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Philips Saeco Moltio HD8769, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Philips Saeco Moltio HD8769.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Philips Saeco Moltio HD8769. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Philips Saeco Moltio HD8769 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
