Manuale d’uso / di manutenzione del prodotto Minuto HD8780 del fabbricante Philips Saeco
Vai alla pagina of 56
INSTRUC TIONS FOR USE Read carefully befor e using the machine. Register your product and get suppor t at www .philips.com/w elcome English T ype HD8761 - HD8764 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing , other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH Congratulations on y our purchase of a Saeco Minuto Classic Milk Frother full automatic espr esso machine! T o fully bene t from the support that Saeco o ers, please register your product at www .philips.com/w elcome . This user manual applies to HD8761 and HD8764.
3 ENGLISH C ONTENTS IMPORT ANT ..................................................................................................... 4 Safety instruc tions ...............................................................................................
4 ENGLISH IMPORT ANT Safety instructions This machine is equipped with safety featur es. Nev er theless read the safety instructions carefully and only use the machi- ne as described in these instructions to avoid ac cidental injur y or damage. Keep this user manual for futur e refer ence.
5 ENGLISH 5 • Do not touch hot sur faces . Use handles and knobs . • Remov e the mains plug from the w all socket: - If a malfunction occurs. - If the machine will not be used for a long time. - Before cleaning the machine. Pull on the plug , not on the power cor d.
6 ENGLISH Caution • The machine is for household use only . It is not intended for use in envir onments such as sta kitchens of shops, o ces , farms or other work en vironmen ts.
7 ENGLISH 7 C ompliance with standards The machine c omplies with ar t.13 of the Italian L egislative Decree dat ed 25 July 2005, no . 151 “Implementation of the directives 2005/95/EC, 2002/96/EC an.
8 INST ALLA TION Product overview 30 19 14 15 18 21 20 12 3 4 11 12 31 13 5 6 7 8 9 10 24 27 25 28 26 29 16 17 22 23.
9 ENGLISH 9 General description 1. Grinder adjustment knob 2. Co ee bean hopper 3. Pre-ground co ee compar tment 4. W ater tank + Lid 5. Co ee bean hopper lid 6. Control panel 7. Dispensing spout 8. F ull drip tray indicator 9. Cup holder grill 10.
10 ENGLISH PREP ARING FOR USE Machine packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the pack aging mat erial for possible future transport. Machine installation 1 Remove the machine from the packaging .
11 ENGLISH 11 8 Slowly pour the co ee beans into the co ee bean hopper . Note: Do not pour too many co ee beans into the co ee bean hopper as this will reduce the grinding performance of the machine. Caution: Only co ee beans must be put into the co ee bean hopper .
12 ENGLISH 12 Switch the pow er button to “I” to turn on the machine. The “ ” button blinks. Y ellow 13 T o turn on the machine simply press the “ ” button.
13 ENGLISH 13 2 Press the “ ” button to start the cycle. The machine starts the automa- tic priming of the circuit by dispensing some water thr ough the Classic Milk Frother . Y ellow 3 The bar under the icon shows the operation pr ogress. When the pro- cess is complete , the machine stops dispensing automatically .
14 ENGLISH Manual rinse cycle During this process you activate the co ee brewing cycle and fresh water ows through the st eam/hot water circuit. This takes a few minutes. 1 Place a container under the dispensing spout. Green 2 Check that the machine shows this display .
15 ENGLISH 15 Green Red 7 Press the “ ” button to start dispensing hot water . 8 Dispense water until the no water icon appears. Note: Y ou can interrupt the manual rinsing by pressing the “ ” button. 9 At the end, ll the water tank again up to the MAX lev el.
16 ENGLISH Measuring and programming wa ter hardness Measuring water hardness is very impor tant f or de ning the frequency in which the machine has to be descaled and to install the “INTENZA+” water lter (for mor e detail on the water lter see nex t chapter).
17 ENGLISH 17 Green 7 Press the “ ” button to exit the programming MENU . The machine shows this display and is r eady to brew . “INTENZA+” water lter installation W e recommend you to install the “INTENZA+” water lter as this prevents lime scale to build up in your machine and preserves a more intense ar oma to your co ee.
18 ENGLISH 4 Put the “INTENZA+ “water lter into the empty water tank. Press it until it cannot move further down. 5 Fill the wat er tank with fresh water and reinsert it into the machine. 6 Dispense the entire water tank by using the hot water function (see chapter “Hot water dispensing”).
19 ENGLISH 19 Y ellow Replacing the “INTENZ A+” water lter When the “INTENZA+” water lter needs to be replaced with a new one , the following icon is displa yed. 1 Replace the “INTENZA+” water lter as described in the previous chap- ter .
20 ENGLISH ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best tasting co ee possible. Saeco Adapting S ystem Co ee is a natural product and its characteristics may change according t o its origin, blend and roast.
21 ENGLISH 21 1 Press and turn the g rinder adjustment knob one notch at a time. Y ou will taste the di erence after brewing 2-3 cups of co ee . 1 2 2 The ref erence marks inside the co ee bean hopper indicate the grind setting.
22 ENGLISH Adjusting the dispensing spout The height of the dispensing spout can be adjusted to better t the dimensions of the cups that you wish to use. Move the dispensing spout up or down with your ngers to adjust its height as shown in the image.
23 ENGLISH 23 Adjusting the co ee lenght The machine allows y ou to adjust the amount of brewed co ee according to your taste and the size of y our cups. Each time the “ ” or “ ” button is pressed, the machine brews a pr e-set amount of co ee.
24 ENGLISH ESPRESSO AND C OFFEE BREWING Before br ewing co ee, make sure that there are no warnings sho wn on the control panel, and that the wat er tank and co ee bean hopper are lled. 2 T o brew an espresso or a C o ee, press the “ ” button to select the desired aroma.
25 ENGLISH 25 Espresso and Co ee brewing using pre -ground co ee This function allows to use pre-ground co ee. With the pre-ground co ee function you can only brew one co ee at a time. 1 Press the “ ” button one or more times to select the pre -ground co ee function.
26 ENGLISH STEAM DISPENSING /CAPPUCCINO BREWING W arning: Danger of scalding! Dispensing may be prec eded by small jets of hot water . The Classic Milk F rother may reach high temper atures. Ne ver touch it with bare hands. U se the appropriate protective handle only .
27 ENGLISH 27 Note: After having pressed the “ ” button it will take a few seconds before the machine stops dispensing completely . Caution: Each time after frothing the milk you need to dispense a small amount of hot water into a c ontainer . Remove the e xternal par t of the Classic Milk Fr other and wash it with lukewarm w ater .
28 ENGLISH 3 The following ic on may be displayed during the pr eheating time requi- red by the machine. Green Y ellow 4 Pour the desir ed amount of hot water .
29 ENGLISH 29 1 3 2 2 Remove the co ee grounds dra wer and empty it. 3 Empty and clean the drip tray . 4 Inser t the co ee grounds draw er back into the drip tray and this into the machine.
30 ENGLISH Daily cleaning of the Classic Milk Frother It is impor tant that you clean the Classic Milk F rother daily or after each use as it preserves hygiene and ensur es per f ect milk froth consistency. Each time after frothing the milk you need to dispense a small amount of hot water into a container .
31 ENGLISH 31 2 Remove the upper part of the Classic Milk Frother from the hot wat er/ steam wand. 3 W ash the upper part of the Classic M ilk F rother with fresh water . 4 Clean the hot water/steam wand of the Classic Milk Fr other with a wet cloth to remov e milk residues.
32 ENGLISH 5 Thoroughly wash the brew g roup with fresh, lukewarm water and carefully clean the upper lter . Caution: Do not use detergent/soap to clean the brew gr oup . 6 Let the brew g roup air-dr y thoroughly . 7 Thoroughly clean the inside of the machine using a soft, dampened cloth.
33 ENGLISH 33 10 Make sure the hook to lock the brew gr oup is in the correct position by rmly pressing the “PUSH” button until you hear a click. Check if the hook is at the top end position. If it is not, please try again. 12 Inser t the brew g roup in its seat again until it locks into place without pressing the “PUSH” button.
34 ENGLISH Monthly lubrication of the bre w group Lubricate the br ew group after appro ximately 500 cups of co ee or once a month. Y ou can purchase the grease f or the brew gr oup separately to lubricate the brew group . Please refer to the maintenance products page in this user manual for further details.
35 ENGLISH 35 3 Inser t the brew g roup in its seat until it locks into place. (see “ Weekly Cleaning of the Brew Group ” chapter). 4 Close the service door and inser t the drip tray and the co ee grounds drawer .
36 ENGLISH 3 Put a “Co ee Oil Remover” tablet in the pre -ground co ee com- partment. Green 4 Press the “ ” button to select the pre -ground co ee function, without adding ground co ee. 5 Press the “ ” button to star t a co ee brewing cycle.
37 ENGLISH 37 11 W ash the brew group thor oughly with fresh water . Green 12 After rinsing the brew group , inser t it again in its seat until it locks into place (see “ W eekly cleaning of the brew group ” chapter). Inser t the drip tray and the co ee grounds drawer .
38 ENGLISH DESCALING The descaling process takes appr ox. 35 minutes. Lime scale builds up inside the machine during use. It needs to be remo- ved regularly as it may clog the wat er and co ee circuit of your machine. The machine tells you when descaling is needed .
39 ENGLISH 39 Y ellow 2 Remove the Classic Milk F rother from the hot water/steam wand . 3 Remove the “INTENZA+” water lter from the water tank if it was in- stalled and replace it with the small white original one . Place the water tank back into the machine.
40 ENGLISH 9 Press the “ ” button to star t the descaling cycle. Y ellow Y ellow 10 The machine will start dispensing the descaling solution at inter vals. The bar on the control panel sho ws the cycle progress. Note: The descaling cycle may be paused by pressing the “ ” button .
41 ENGLISH 41 19 When the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displa yed. P ress the“ ” button to quit the descaling cycle. Green Y ellow 20 Press the “ ” button to prime the circuit.
42 ENGLISH MEANING OF THE DISPLA Y SYMBOLS This machine is equipped with a colour-coded system to make the user’ s understanding of the display signals easier . The icons are colour-coded accor ding to the tra c light principle. Ready Signals (Green C olour) The machine is ready to br ew products.
43 ENGLISH 43 Ready Signals (Green C olour) Co ee brewing using pre-ground co ee in progress. W arning Signals (Y ellow Colour) The machine is heating-up to brew bev erages or dispense hot water . The machine performs the rinsing cycle. Wait until the machine has c omple- ted the cycle.
44 ENGLISH W arning Signals (Red Colour) Completely insert the drip tray with the co ee grounds drawer into the ma- chine and close the service door . Fill the c o ee bean hopper . The brew gr oup must be inserted into the machine. Empty the co ee grounds drawer .
45 ENGLISH 45 TROUBLESHOOTING This chapter summarizes the most common pr oblems you could en- counter with your machine . If you are unable to solve the pr oblem with the information below , visit w ww .philips.com/support for a list of frequently asked questions or contact the Philips Saeco hotline in your country.
46 ENGLISH Machine actions Causes Solutions The machine grinds the co ee beans but no co ee comes out. (See note) There is no water . Fill the wat er tank and prime the circuit (chapter “Using the machine for the rst time”). The brew gr oup is dirt y .
47 ENGLISH 47 ENERGY SA VING Stand-by The Saeco full automatic espresso machine is desig ned for energy saving- proven b y the Class A energy label. After 30 minutes of inactivity the machine turns o automatically (unless you have di erently prog rammed the stand-by time).
48 ENGLISH TECHNICAL SPECIFICA TION The manufacturer reserves the right to make changes to the technical speci cations of the product Nominal V oltage - Po wer Rating - Po wer Supply See label on the inside of the service door Housing material Thermoplastic material Size (w x h x d) 215 x 330 x 429 mm W eight 6.
49 ENGLISH 49 ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenance pr oducts only . Y ou can purchase these at the Philips online shop at www.
50 ENGLISH - Maintenance Kit CA 6706 - Co ee Oil Remover CA6704.
.
.
.
www .philips.com/w elcome The manufacturer reserves the right to make changes without prior notice. Rev .00 del 15-02-13 EN 02 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Philips Saeco Minuto HD8780 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Philips Saeco Minuto HD8780 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Philips Saeco Minuto HD8780 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Philips Saeco Minuto HD8780 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Philips Saeco Minuto HD8780, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Philips Saeco Minuto HD8780.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Philips Saeco Minuto HD8780. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Philips Saeco Minuto HD8780 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.