Manuale d’uso / di manutenzione del prodotto ES3012 del fabbricante Pelco
Vai alla pagina of 40
ES3012 Series Esprit ® C306M-K (4/05) ® INST ALLA TION MANUAL.
2 P elco Manual C306M-K (4/05).
P elco Manual C306M-K (4/05) 3 CONTENTS Section Page IMPORT ANT SAFETY INSTR UCTIONS ............................................................................ 5 DESCRIPTION ...........................................................................
4 P elco Manual C306M-K (4/05) LIST OF ILLUSTRA TIONS Figur e Page 1 Esprit ES3012 System Dimensions Drawing .................................................... 37 LIST OF TABLES T able Page A Switch Settings for SW1 .................................
P elco Manual C306M-K (4/05) 5 IMPOR T ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not bloc k any ventilation openings . Install in accordance with the manufacturer’ s instructions.
6 P elco Manual C306M-K (4/05) DESCRIPTION The Esprit ® ES3012 Series Integrated Positioning System is available as a basic system or as an ImageP ak ® camera and lens package . The basic system integ rates a pan and tilt, camera enclosure, and receiv er (camera and lens not included).
P elco Manual C306M-K (4/05) 7 INST ALLA TION The basic ES3012 system does not include a camera and lens package . Therefore you m ust install a camera and lens in the enclosure bef ore mounting the pan/tilt to the base of the system.
8 P elco Manual C306M-K (4/05) A B 3 Attach the camera and lens to the mount. Extend the lens to the maximum length before positioning the camer a and lens.
P elco Manual C306M-K (4/05) 9 P AN AND TIL T INST ALLA TION 1 When installing the ES3012 Esprit system, allow f or sufficient clear- ance between the top of the unit and ov erhead obstr uctions. This will prev ent interference when the en- closure is driven to its maximum el- ev ation of 40 degrees.
10 P elco Manual C306M-K (4/05) 4 Route the wires and cables through the center of the Esprit mount. Re- install the transf or mer module into the base.
P elco Manual C306M-K (4/05) 11 8 Tu rn on the po wer . If the red LED lights, turn off the power and proceed to the ne xt step . If the red LED does not light, refer to the T roubleshooting section.
12 P elco Manual C306M-K (4/05) TXB SERIES TRANSLA TOR BOARD INST ALLA TION (OPTIONAL) P elco’ s TXB Ser ies allows controllers from other companies to communicate with the Esprit system. To install a TXB Ser ies board, remov e the left cover of the pan and tilt.
P elco Manual C306M-K (4/05) 13 To reinstall the pan and tilt co ver , do the f ollowing: 1. Properly position the cover and slide it into place . The sides of the cover must fit under the front and back rain guards of the pan and tilt, and the top of the cover must seat against the lip of the top gasket.
14 P elco Manual C306M-K (4/05) OPERA TION POWER-UP DISPLA Y When the Esprit system is powered up or reset, the selected protocol, re vision number , and other information is displa yed on the monitor .
P elco Manual C306M-K (4/05) 15 P AN, SCAN, AND TIL T SPEEDS Pan and scan speeds are adjustable from 3 to 40 degrees per second through the pro- gr amming menu. The tilt speed is one-half of the pan speed. LENS FUNCTIONS Lens zoom, f ocus, and iris functions are operated from the controller .
16 P elco Manual C306M-K (4/05) PROGRAMMING ESPRIT MENUS To access the main menu, program preset 95. To mak e selections in the main menu, use the follo wing controls: Joystick: Move up or down to position cursor or to toggle between selections. Iris Open: Enter.
P elco Manual C306M-K (4/05) 17 ACCESSING MAIN MENU (PRESET 95) Y ou can call up the main menu on your monitor b y programming (setting or creating) preset 95 (28 if in 32-preset mode). Programming preset 95 f or P elco’ s controllers varies according to the type of controller you are using.
18 P elco Manual C306M-K (4/05) AZ/EL Other Menu P ark Time 0 Pan/Scan Spd 7 Power Up Default Pat length 6 min Spd Profile 50 MPH wind < Zone Blank> <Az /El / Direction> Exit Az/El/Directi.
P elco Manual C306M-K (4/05) 19 AZ/EL LINE Az/El Line controls the vertical display position of the Azimuth/Ele vation label. The label may be displayed on lines 3 through 10. Line 3 is the third line from the top of the screen and line 10 is located at the bottom of the screen.
20 P elco Manual C306M-K (4/05) AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the prog rammed 0 ° point that is normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and compass readings are based on the set azimuth zero point.
P elco Manual C306M-K (4/05) 21 DIRECTION Direction programs the horizontal displa y position of the Direction label (N, NW , NE, …). The following settings are available for the Direction label: Off – Label is not display ed. Left – Label is displayed on the left-hand side of the screen.
22 P elco Manual C306M-K (4/05) DIRECTION LINE NOTE: Direction display is not available while you are programming or running a pattern. Other Menu P ark Time 0 Pan/Scan Spd 7 Power Up Default Pat leng.
P elco Manual C306M-K (4/05) 23 DISPLA Y DURA TION Display Dur ation programs the duration the Az/El, Direction, and Zoom labels are displa yed on the monitor . The av ailable settings for displa y duration include the f ollowing: CONST ANT - The label is displa yed continuously .
24 P elco Manual C306M-K (4/05) LIMIT STOPS TURNING LIMIT STOPS ON OR OFF To change the limit stop mode: 1. Program preset 95 (28). The main menu appears . 2. Position the cursor (>) beside Limits. 3. Press the Iris Open button to enter the Limits menu.
P elco Manual C306M-K (4/05) 25 Scan Limit Stops When scan limit stops are set, the pan and tilt reverses direction during random, frame, or auto scanning when a limit stop is reached.
26 P elco Manual C306M-K (4/05) P AN/SCAN SPEED The pan/scan speed is adjustable from 3-40 degrees per second. This occurs in three scan modes: auto, random, and frame scan. To change the pan/scan speed: 1. Program preset 95 (28). The main menu appears .
P elco Manual C306M-K (4/05) 27 POWER-UP MODE This feature lets the system resume a desired condition f ollowing power-up . The menu in- cludes the following choices. • Default - On power-up, the pan and tilt goes through a configuration cycle and stops at zero reference, showing “Configuration Done,” address, and mode settings on the screen.
28 P elco Manual C306M-K (4/05) SPEED PROFILE This feature allows the operator to set the wind speed conditions for the location of the system. Y ou can set two wind speed profiles of 50 mph or 90 mph in which the system will remain operational. In both settings, the pan speed will be a maximum of 40 degrees per second.
P elco Manual C306M-K (4/05) 29 ZONES Basic rules for setting zones: 1. Refer to the documentation for your control system to program zones. 2. Establish zones using the controller , pr ior to programming ZONE BLANK with the Es- prit onscreen menu. 3.
30 P elco Manual C306M-K (4/05) TROUBLESHOOTING Symptom: System does not operate. 1. Check system input v oltage. 2. Check f or proper positioning of input power select s witch for the transf ormer (ES3012-5 models only). 3. The Esprit system is protected by a resettable o vercurrent protective de vice located in the transf or mer module.
P elco Manual C306M-K (4/05) 31 Symptom: No video or poor video 1. Check the video and power connections to the camera. 2. Check for power to the camera from the Esprit system camera power output. 3. Check all coax BNC connectors from the camer a to the monitor.
32 P elco Manual C306M-K (4/05) APPENDIX NOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or e xtended mode. Therefore , the DIP switches settings ha ve no effect on Coaxitron control signals .
P elco Manual C306M-K (4/05) 33 Ta b le B. Switch Settings f or SW2 NOTE: The Esprit will sense and automatically select input from Coaxitron control signals in either the standard or e xtended mode. Theref ore, the DIP s witches settings have no eff ect on Coaxitron control signals.
34 P elco Manual C306M-K (4/05) Ta b le B. Switch Settings f or SW2 (continued) (Continued on ne xt page) Receiver Address Switch Setting P-T ype D-T ype Control Control SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 .
P elco Manual C306M-K (4/05) 35 Ta b le B. Switch Settings f or SW2 (continued) Receiver Address Switch Setting P-T ype D-T ype Control Control SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 – 232 .
36 P elco Manual C306M-K (4/05) SPECIFICA TIONS ELECTRICAL Input V oltage: 24 or 120/230 V A C, 50/60 Hz; on ES3012-5 models, a s witch is installed on the transf or mer module located in the mount base to make 120 or 230 V AC input v oltage selection.
P elco Manual C306M-K (4/05) 37 Figure 1. Esprit ES3012 System Dimensions Drawing 13.8 (35.1) 4.1 (10.5) 14.0 (35.5) 4.8 (12.3) 9.1 (23.2) 7.7 (19.7) 6.9 (17.5) 7.9 (20.2) 16.4 (41.7) 5.2 (13.3) NOTE: V ALUES IN P ARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
38 P elco Manual C306M-K (4/05) REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits of a Class B digital de vice, pursuant to par t 15 of the FCC rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation.
P elco Manual C306M-K (4/05) 39 P elco, the P elco logo, Camclosure , Espr it, Genex, Legacy , and Spectra are registered trademarks of P elco. ©Copyright 2005, P elco. Endura and ExSite are trademarks of P elco. All rights reser ved. Lexan is a registered trademark of the General Electric Company .
W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco ES3012 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco ES3012 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco ES3012 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco ES3012 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco ES3012, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco ES3012.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco ES3012. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco ES3012 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
