Manuale d’uso / di manutenzione del prodotto DX1104-080 del fabbricante Pelco
Vai alla pagina of 32
® INSTALLATION/OPERATION DX1104-080 Digital V ideo Recorder C617M-A (7/04).
2 C617M-A 8/04 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 List of Illustrations .
C617M-A 8/04 3 List of Illustrations 1 DX1100 Series DVR Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 DX1100 Series DVR Installation .
4 C617M-A 8/04 Important Safety Instructions Observe the following warnings before installing and using this product: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
C617M-A 8/04 5 Description The DX1104-080 digital video recorder (DVR) is a compact recorder that can store and play back images from four cameras and audio from one camera. The DVR can be placed on a shelf or desktop for easy access to the front panel controls for operation and programming.
6 C617M-A 8/04 Installation The following parts are supplied: 1 DX1100 Series DVR 1 230 V AC power cord adapter 1 USB extension cable (for connecting non-adjacent equipment) 1 USB flash drive (USB 1.1 compliant) (Supplied for a limited time only) Figure 2.
C617M-A 8/04 7 WARNING: Adequate ventilation is required for proper operation of the DVR. Allow two inches of space above the unit and on each side for air circulation. 1. Connect cameras to the CAMERA INPUT connectors (BNC) on the rear of the DVR. Refer to T able A for video coaxial cable distances.
8 C617M-A 8/04 Programming Programming allows you to configure camera, audio, and alarm operation; set the system date and time; define a password; and update the program.
C617M-A 8/04 9 CAMERA MENU Use this menu to define the following: • Which cameras the DVR will record • Whether starting and stopping of recording will be done manually or automatically • What .
10 C617M-A 8/04 5. The fps (Frame Per Second) field shows the recording rate for all cameras. To change the fps, use the Search (<</>>) buttons to highlight fps, and then use the number keypad to enter the frames per second.
C617M-A 8/04 11 11. Use the Search (<</>>) buttons to highlight each field in the menu. Recording T imes The recorder will record continuously between the specified times. Use the number buttons to enter the hour of the starting time and end- ing time.
12 C617M-A 8/04 ALL RESOLUTION MENU Use this menu to set the resolution for all cameras. If you want to use different resolutions for the cameras, set the resolutions in the Camera menu (previous section).
C617M-A 8/04 13 ALARM OUTPUT MENU The ALARM output on the rear panel is a single-pole, normally open, latching, dry contact. This output can be used to notify you if there has been an alarm event that might require review .
14 C617M-A 8/04 3. Use the Search (<</>>) buttons to move around within the menu. Highlight Alarm Output and press the Play/Pause button to select. The Alarm Output menu appears. 4. Use the Search (<</>>) buttons to highlight the fields for starting and ending times.
C617M-A 8/04 15 T IME MENU The DVR uses the time and date to index video on the hard disk drive so you can find it later . Changing the time can cause the DVR to work improperly when you try to play back video. If you set the hour ahead, this is not a problem.
16 C617M-A 8/04 PASSWORD MENU Use this menu to change the password (optional). Skip steps 1 and 2 if you are already in the Setup Menu. 1. Press and hold the Function button. The Function Key List appears. Keep holding the Function button. 2. Press and release the 0 button, and then release the Function button.
C617M-A 8/04 17 PROGRAM UPDATE MENU Use this menu to load a newer version of software into your unit. This menu also shows the current version of software that is in your DVR. NOTE: To perform this update, you will need a USB flash drive (32 MB minimum and FA T or FA T32 format) and a PC to access the Pelco Internet web site (www .
18 C617M-A 8/04 6. Use the Search (<</>>) buttons to highlight Update and then press the Play/Pause button to select. (If you do not want to update your program, highlight Quit and press the Play/Pause button.) The update starts and the Program Update Processing screen appears, which shows the progress of the update.
C617M-A 8/04 19 HELP If the Help function is enabled, the Help screens appear on the monitor whenever power is turned on. Skip steps 1 and 2 if you are already in the Setup Menu. 1. Press and hold the Function button. The Function Key List appears. Keep holding the Function button.
20 C617M-A 8/04 Operation The Record LED on the front panel indicates what the DVR is doing. Recording: Red (blinking) Playback: Green (steady) Fast Playback: Green (blinking) Alarm Event Recording Enabled: Y ellow (steady) Stop: Off V IEWING CAMERAS If the Preview feature in the Camera menu is On, you can view live video on the monitor .
C617M-A 8/04 21 AUTOMATIC EVENT RECORDING Event recording allows you to program the DVR to record only when an alarm input is activated. The DVR will record for as long as the alarm input is active. After the alarm goes away , the DVR will continue to record for the programmed time.
22 C617M-A 8/04 3. Use the Search (<</>>) buttons to select Backup and then press the Play/Pause button. (Y ou do not have to choose a camera number and time.) The following confirmation screen appears, warning that data on the USB flash drive will be erased and cannot be recovered.
C617M-A 8/04 23 PLAYBACK START PLAYBACK To begin playback: 1. Press the Play/Pause button. 2. Enter the password if requested. 3. The Play window appears. 4. Press a number button (1-4) to select the camera to view . The camera channel appears on the screen.
24 C617M-A 8/04 FRAME-BY-FRAME PLAYBACK To play back one frame at a time: 1. Press the Play/Pause button to pause playback. “Pause” appears on the screen. 2. Use the Search (>>) buttons to move forward one frame at a time. 3. Press the Play/Pause button again to resume normal playback.
C617M-A 8/04 25 V IEWING RECORDINGS ON A PC Using the viewer software that came with your DX1104-080, you can view video from the DVR that you save on your PC. T o do so: 1. Save the data file from the DVR to the USB flash drive. (Refer to the T ransferring Data Using a USB Flash Drive section.
26 C617M-A 8/04 ALARM RELAY OUTPUT OPERATION Once the relay is triggered, it remains on until you manually turn it off. Y ou can set the relay to arm itself automatically or you can manually arm the relay . This relay operates independently of the event (alarm) recording in the camera setup menus.
C617M-A 8/04 27 T roubleshooting Symptom: Y ou cannot stop recording even after pushing the Stop button. Check the Camera menu for the camera(s) that will not stop recording. Make sure the Automatic Recording feature is turned off. Symptom: There is no video on the monitor while the DVR is recording or is in recording standby mode (not recording).
28 C617M-A 8/04 Specifications Electrical / Video Input V oltage: 80-240 V AC, 50/60 Hz Power Consumption: 20 watts Signal System: NTSC or P AL Video Compression: MPEG Resolution: 352 x 240 pixels, t.
C617M-A 8/04 29 REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
® W orld Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco DX1104-080 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco DX1104-080 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco DX1104-080 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco DX1104-080 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco DX1104-080, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco DX1104-080.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco DX1104-080. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco DX1104-080 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
