Manuale d’uso / di manutenzione del prodotto C2601M-C (3/07) del fabbricante Pelco
Vai alla pagina of 40
C2601M-C (3/07) INSTALLATION DX4000 Digital V ideo Recorder.
.
C2601M-C (3/07) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description .
4 C2601M-C (3/07) List of Illustrations 1 Package Conten ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C2601M-C (3/07) 5 Regulatory Notices This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmful interference, and (2 ) this device must accept any interference received, including interference that may ca use undesired operat io n.
6 C2601M-C (3/07) Description The DX4000 Se ries digita l video re corder (DVR) i s an entry- level, prof essional di gital video recorder th at not only r eplaces th e traditional VCR and multiplexer combinatio n but also offers the benefits derived from the latest in d igital video processing.
C2601M-C (3/07) 7 FEATURES • 4-channel, full duplex digital video recor der • 4-channel audio input s with one audio output • MPEG-4 compre ssion • Up to 704 x 480 Recording Reso lution • Up.
8 C2601M-C (3/07) Before Y ou Begin Before you install the D X4000, review the package contents to ensure that it contains all pa rts. PACKAGE CONTENTS Figure 1. Package Contents Qty Description 1 Digital vide o recorder with built-in hard disk dr ive.
C2601M-C (3/07) 9 Front Panel Layout Figure 2. Front Panel of the DX4000 The button s on the fr ont panel o f the unit control PTZ and camera focus, to enter menus and adjust s ettings o n the DX40 00, and to search for and play back v ideo. Refer t o Figure 2 for the loc ations of t he buttons on the front panel.
10 C2601M-C (3/07) V IDEO CONTROL BUTTONS ON TH E FRONT PANEL OF THE DX4000 Figure 3. Control Buttons on the Front Panel ì Fast reverse: Plays the vid eo backward at a fast speed. î Increase forward or reverse: Increases the sp eed of the currently pla ying directi on (forward or reverse).
C2601M-C (3/07) 11 Remote Control Layout The diagram below describ es the buttons on the remote control tha t operate the DX4000. Each b utton has a corresponding funct ion on the front panel of the unit. The remote con trol is operable only when the remote contr ol sensor on the DX40 00 is enable d.
12 C2601M-C (3/07) Connecting Devices to the DX4000 Use the followin g diagram of the rear pane l of the DX40 00 to determin e how to conne ct devices to the unit. Figure 5. Rear Panel of the DX4000 WAR N I NG : T o avoi d electric sh ock, turn off the unit and unplug it whi le connectin g devices to th e DX4000.
C2601M-C (3/07) 13 ~ä If necessary , connect a computer directly to the DX4000 with a DB9 cable. This conn ection is fo r use on ly by service techn ician s while resolving prob lems with the unit.
14 C2601M-C (3/07) Overview of the Sy stem The DX4000 serves as the c enter of a video surveillance system to whi ch many computers can be connected. Figure 4 ill ustrates t hat computers can be connected e ither directly to the DX4000 or remotely ove r a network.
C2601M-C (3/07) 15 Operation Refer to the DX4000 Operat ion manual for details on how to access the syst em features and navi gate the menus. The operation man ual is located on the reso urce CD that came with your unit. STARTING AND STOPPING THE DX4000 Press the p ower button o n the front panel of the D X4000 to s tart it.
16 C2601M-C (3/07) Configuring the Sy stem Before you use the DX4 000 to record and monitor vide o, you should conf igure the system settings dis cussed below . DATE AND T IME The Date/Time menu contains th e following o ptions for controlling date and time on the DX400 0: • Date: Choose this option to set th e date on the DX4000.
C2601M-C (3/07) 17 4. Select the Date /T ime option if it is not already selected, and then pre ss the Enter button. The Date/T ime menu appears. Figure 11.
18 C2601M-C (3/07) 4. Press the do wn arrow button until the Network option is sele cted, and then press the Enter button. Th e Network menu appears. Figure 12. Network Menu 5. Enable or disable the settings to fit your system. Adjus ting a setting is a two-step process.
C2601M-C (3/07) 19 ENTERING AN IP ADDRESS If you use DH CP to derive IP addresses , you do not need to set up an IP addr ess for th e DX4000. Follo w these step s to set up th e IP address for the DX4000 if DHCP has bee n turned off : 1. Select the Syst em menu from the main menu of the DX4000 , and then select Network.
20 C2601M-C (3/07) Upgrading or Changing Firmware on the DX4000 Firmware resides in the flas h memory of the main board o f the DX4000. T o upgrade t he firmware you must run an upgrade prog ram f rom a computer that is conne cted to the unit through a netw ork.
C2601M-C (3/07) 21 4. From a remote compu ter that is conne cted to the D X4000 throug h a network conn ection, locat e the upgrade f iles. These fil es ca n be loca ted on the resour ce CD or on a network dri ve. The names of these fi les might be d ifferent for each up grade.
22 C2601M-C (3/07) 8. After the upgrade proc ess has fin ished, a messa ge appears on the screen asking you t o restart th e system. Figure 18. Upgrade Complete 9. Press the Power bu tton to restart th e DX4000. 10. On the r emote computer , click the Exit button to close the installation progra m.
C2601M-C (3/07) 23 UPGRADING THROUGH A DIRECT CONNECTION Follow these i nstructions if you are con nected to th e DX4000 fro m a remote comp uter with a cr ossover cable . This comput er also must have access to up grade fil es either on a network dri ve or a CD.
24 C2601M-C (3/07) 7. Update th e information on the screen as follo ws, and then click the Download butt on. • In the T arget IP field, ente r the IP address for the DX4000 that you noted in step 4. • Check the b ox for Downl oad Only Appli cation Image.
C2601M-C (3/07) 25 V ERIFYING NETWORK CONNECTIONS Since upgradin g the firmware on th e DX4000 from a compute r connected by a crossover cable does not rely on DHCP to assign the I P addres s on the DX4000, make sure that your comp uter is in the same subnet range as the DX40 00.
26 C2601M-C (3/07) Figure 25. Local Area Con nection Properties Screen 5. Select Interne t Protocol (TCP/IP) and cli ck the Prop erties. Th e Internet P rotocol (TCP/I P) Propert ies screen appe ars. Figure 26. Internet Protocol (TCP/IP) Propert ies Screen 6.
C2601M-C (3/07) 27 Figure 27. Running a Command 9. T ype the ping command followed by the IP address that yo u entered in step 6, and then press the Enter key on your keybo ard. T he command would resemble the following: ping 192. 168.50.2 If the IP addr ess is corre ct, a DOS wind ow appears with a series of messages.
28 C2601M-C (3/07) Installing and Updating the Remote Agent Application The DX4000 remote ag ent application is designed to run on a comp uter that uses a Microsoft ® Windows ® op erating system. Refer to Specifications on page 36 for a list of su pported versions of the Windows operating systems.
C2601M-C (3/07) 29 T o install or update the Remo te Agent 1. Locate the remote agent software installation program eithe r on the reso urce CD or a network driv e. 2. Double-click the file to start it. For ex ample, in t he examples abov e, you would d ouble-click t he file called DX4000RemoteAge nt.
30 C2601M-C (3/07) 4. Review the lice nse agreemen t, select th e “I accept this License Agre ement” check box, an d then cl ick Nex t. The Choose Install Folder screen appe ars.
C2601M-C (3/07) 31 7. If your comput er contains a version of Microsoft ® DirectX ® that is older than version 7.0, yo u will be prompted to install it. Figure 34. Microsoft DirectX C onfirmation Dialog 8. Click Y es to install this application, and then follow the instructions on the screen to install Microsoft DirectX.
32 C2601M-C (3/07) Installing the W eb Client The DX4000 Web client provides r emote access t o the DX4000 so that you ca n monitor liv e video acro ss the Inter net. T o s earch for o r play back recorded v ideo or to update sy stem settings , you must us e the remot e agent, t he controls on the fr ont panel of the DX4000, or t he remote control.
C2601M-C (3/07) 33 T o install the Web client from the resource CD 1. Load the DX400 0 resource CD in yo ur CD-ROM driv e. The follo wing screen appe ars. Figure 39. DX4000 Resource CD Main S creen 2. Click DX4000 Utilities. A list of util ity files appears.
34 C2601M-C (3/07) Figure 41. Web Client Utility Files 4. Select both fil es and then copy them to any directo ry on your comp uter . Fo r example, you might copy them to a fol der called C : Program FilesPelcoDX4000Webclient. Figure 42. Destination Folder for the W eb Client 5.
C2601M-C (3/07) 35 Figure 43. W eb Client Browser Window 6. Click the Conn ect button. The Log In screen appear s. Figure 44. W eb Client Log In S creen 7. Enter the fo llowing infor mation to co nnect to t he DX4000, and t hen click OK . • IP address: Enter the IP ad dress of the DX4000.
36 C2601M-C (3/07) Specifications COMPATIBLE PRODUCTS Esprit posit ioning syste ms, Spectra domes ELECTRICAL/V IDEO Input Voltage 100-240 VAC, 50/60 Hz, autoran ging Power Consumptio n 60 W Signal Sys.
C2601M-C (3/07) 37 CERTIFICATIONS • CE, Class A • UL Listed (external power supply) • FCC, Class A REMOTE AGENT Operating Syst em Microsoft Win dows XP Professi onal Processor In tel ® Pentium ® IV , 2.
38 C2601M-C (3/07).
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without char ge, any merchandise proved defective in material or workmanship for a period of o ne year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 U S A U S A & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C2601M-C (3/07) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C2601M-C (3/07) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C2601M-C (3/07) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C2601M-C (3/07) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C2601M-C (3/07), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C2601M-C (3/07).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C2601M-C (3/07). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C2601M-C (3/07) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
