Manuale d’uso / di manutenzione del prodotto C1603M del fabbricante Pelco
Vai alla pagina of 20
DX8000-ISCI SCSI Installation Manual C1603M (6/04) Digital Video Recorder DX8000.
Protecting people and property in a million locations worldwide..
C1603M (6/04) 1 Introduction The following instructions serve as a guide for the installation of the DX8000-ISCI internal SCSI adapter . PARTS LIST Qty Description 1 Adaptec ® 29160N UltraWide SCSI a.
2 C1603M (6/04) Getting Ready 1. Familiarize yourself with the instructions throughout this manual. 2. Check that you have all the necessary parts and tools.
C1603M (6/04) 3 Figure 3. Removing Power Cord from Unit.
4 C1603M (6/04) Figure 4. ESD Protection 5. Ensure that the DX8000 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit.
C1603M (6/04) 5 Prepare the Unit OPEN THE UNIT CHASSIS WARNING: The chassis assembly includes parts with sharp edges. T o avoid injury , use caution when working in and around the DX8000’ s chassis and components. 1. If the DX8000 is mounted in a rack, remove it and transport it to an area that will provide full access to the unit chassis: a.
6 C1603M (6/04) c. Carefully remove the chassis cover by sliding it back and up. Set aside the cover . Figure 5 illustrates the interior of the DX8000.
C1603M (6/04) 7 COMPONENT LA YOUT Figure 6 shows the location of your DX8000 Series DVR’ s major components. Certain cables and components have been omitted from the illustrations in this manual for the purpose of clarity .
8 C1603M (6/04) REMOVE THE REAR CROSS-BRACE 1. Using a Phillips-head screwdriver , remove the two flat-head screws that secure the rear cross-brace. Then liftout the cross-brace.
C1603M (6/04) 9 2. Move the rear cross-brace aside and keep the screws for later use. Figure 8. Moving Rear Cross-Brace to Back of Unit.
10 C1603M (6/04) Install the DX8000-ISCI SCSI Card 1. Locate PCI Slot 1 on the system motherboard. This is the expansion slot that is closest to the system’ s VGA card.
C1603M (6/04) 11 2. Remove the slot cover from PCI Slot 1: a. Using a Phillips-head screwdriver , remove the screw that fastens the slot cover to the chassis.
12 C1603M (6/04) 3. Carefully remove the DX8000-ISCI SCSI card from its static-safe packaging. Handle the adapter card by its edges and slot cover , and avoid touching the card’ s components, connectors, and conductive leads. 4. Insert the DX8000-ISCI SCSI card in PCI Slot 1: a.
C1603M (6/04) 13 d. Using the screw you removed in step 2a, secure the DX8000-ISCI card to the chassis. Refer to Figure 12. Figure 12. Securing the DX8000-ISCI SCSI Card 4d.
14 C1603M (6/04) Reassemble the Unit 1. Replace the rear cross-brace, and secure it with the flat-head screws you set aside earlier . Refer to Figure 13.
C1603M (6/04) 15 2. Replace the chassis cover using the same screws you removed from the side and rear of the unit. Refer to Figure 14. Figure 14. Replacing Chassis Cover 3. Attach the silver part label that came in your upgrade kit to the inside of your DVR’ s front door .
16 C1603M (6/04) c. Press down firmly to ensure that the label properly adheres to the inside of the door . NOTE: In the event that your unit or its components require service, part labels must be present and appropriately affixed to the unit’ s door .
PRODUCT WARRANTY AND RETURN INFORMA TION PRODUCT WARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 2004, Pelco. All rights reserved. Windows is a registered trademark of Microsoft Corporation.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C1603M è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C1603M - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C1603M imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C1603M ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C1603M, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C1603M.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C1603M. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C1603M insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
