Manuale d’uso / di manutenzione del prodotto VE248Q del fabbricante Asus
Vai alla pagina of 22
VE248Q/VE228Q LED Monitor U ser G uide.
ii E6235 First Edition April 2011 Copyright © 201 1 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmi.
iii Contents Notices ......................................................................................................... iv Safety information ....................................................................................... v Care & Cleaning .
iv Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
v Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent re or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
vi Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
vii Wheretondmoreinformation Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products.
1-1 ASUS VE248Q/VE228Q Series LED Monitor 1.1 Welcome! Thank you for purchasing the ASUS ® LED monitor! The latest widescreen LED monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience.
1-2 Chapter 1: Product introduction 1.3 Monitor introduction 1.3.1 Front view 1 2 6 4 3 5 1. button: Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD • menu is active.
1-3 ASUS VE248Q/VE228Q Series LED Monitor Selects an available input source. • 6. Power button/power indicator Turns the monitor on/off. • The color definition of the power indicator is as the below table. • Status Description Blue ON Amber Standby mode OFF OFF 1.
1-4 Chapter 1: Product introduction.
2-1 ASUS VE248Q/VE228Q Series LED Monitor 2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Assemble the base and the arm by aligning the arrow marks on the base and the arm. 3.
2-2 Chapter 2: Setup 2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes.
2-3 ASUS VE248Q/VE228Q Series LED Monitor 2.4 Connecting the cables 1. Connect the cables as the following instructions: VE248Q VE228Q VGA HDMI Earphone jack Audio-in Display port To connect the audio cable: • connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port.
2-4 Chapter 2: Setup 2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.
3-1 ASUS VE248Q/VE228Q Series LED Monitor 3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Press the MENU button to activate 1. the OSD menu. Press 2. , and t o navigate through the functions. Highlight the desired function and press the MENU button to activate it.
3-2 2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., and Skin Tone from this menu. Brightness • : the adjusting range is from 0 to 100. is a hotkey to activate this function. Contrast • : the adjusting range is from 0 to 100.
3-3 ASUS VE248Q/VE228Q Series LED Monitor 4. Input Select In this function, you can select your desired input source. 5. System Setup Allows you to adjust the system. Splendid Demo Mode • : splits the screen into two for Splendid modes comparison.
3-4 3.2 Specicationssummary(VE248Q) Panel Type TFT LCD Panel size 24" (16:9, 61 cm) wide screen Max. Resolution 1920 x 1080 Pixel pitch 0.2765 mm Brightness (Typ.) 250 cd/m 2 Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.) 50,000,000:1 (with ASCR on) Viewing angle(H/V) CR>10 170˚/160˚ Display colors 16.
3-5 ASUS VE248Q/VE228Q Series LED Monitor Specicationssummary(VE228Q) Panel Type TFT LCD Panel size 21.5" (16:9, 54.6 cm) wide screen Max. Resolution 1920 x 1080 Pixel pitch 0.248 mm Brightness (Typ.) 250 cd/m 2 Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.
3-6 3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON Press the • button to check if the monitor is in the ON mode. Check if the power cord is properly • connected to the monitor and the power outlet. The power LED lights amber and there is no screen image Check if the monitor and the computer are • in the ON mode.
3-7 ASUS VE248Q/VE228Q Series LED Monitor 3.4 Supported operating modes Resolution Frequency Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel (MHz) 640x480 31.5 60 25.18 640x480 35.0 67 30.24 640x480 37.9 72 31.50 640x480 37.5 75 31.50 720x400 31.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Asus VE248Q è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Asus VE248Q - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Asus VE248Q imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Asus VE248Q ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Asus VE248Q, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Asus VE248Q.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Asus VE248Q. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Asus VE248Q insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
