Manuale d’uso / di manutenzione del prodotto KX-TG2227S del fabbricante Panasonic
Vai alla pagina of 60
Preparation Cordless Telephone Answering System Useful Information 2.4GHz Digital Cordless Answering system Model No. KX-TG2227S Pulse-or-tone dialing capability Operating Instructions Charge the battery for about 15 hours before initial use. PLEASE READ BEFORE USE AND SAVE.
2 Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 52 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Attach your purchase receipt here. For your future reference Serial No.
3 For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 15 hours before initial use (p. 10).
Contents 4 Preparation Location of Controls ...................................................................... 6 Display ............................................................................................. 8 Settings .....................
Answering System Automatic Answering Operation ..................................................28 Setting the Unit to Answer Calls ...................................................28 Listening to Messages ..........................................
Location of Controls 6 Handset CH A U T O AUTO CAL L L W A WA I T PA USE USE AL L L MS G NE W W MSG TONE TONE STOP A N AN S S O FF OFF AN S S ON S K IP KIP RE P E PE AT PL AY BACK AY BACK 9 8 3 2 1 6 .
7 Preparation For assistance, please call: 1-800-211-PANA(7262).
8 Base unit display The clock needs adjusting (p. 18). Your greeting or memo message was not recorded correctly. Record it again (p. 15, 33). The unit is in the answering system programming mode. The speaker volume level is set to “5”. You can select: — 9 levels (0– 8) are available while using the answering system (p.
9 Preparation For assistance, please call: 1-800-211-PANA(7262) Settings Connections • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.
10 Settings Battery Charge Place the handset on the base unit and charge for about 15 hours before initial use. • The IN USE/CHARGE/HOLD indicator lights and a beep sounds.
Recharge When the RECHARGE indicator flashes or the unit beeps intermittently while it is use, place the handset on the base unit to recharge the battery for 15 hours. • If you DO NOT recharge the handset battery for more than 15 minutes, the RECHARGE indicator will continue to flash.
12 Dialing Mode You can program the dialing mode using the handset near the base unit. If you have touch tone service, set to TONE. If rotary or pulse service is used, set to PULSE. Your phone comes from the factory set to TONE. Make sure the unit is not being used and the handset is lifted off the base unit.
13 Preparation For assistance, please call: 1-800-211-PANA(7262) Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Your phone comes from the factory set to “A”. Make sure the unit is not being used and the handset is lifted off the base unit.
14 Ringer Pattern You can select the handset ringer pattern out of 6 patterns . When an incoming call is being received, the unit rings in the selected pattern. Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á .
15 Preparation For assistance, please call: 1-800-211-PANA(7262) To record a greeting message 1 Press and hold (GREETING) until “ Record greeting after the beep ” is heard. • A long beep sounds. 2 Talk clearly, about 8 inches (20 cm) away from the MIC (microphone).
16 To check the recorded greeting message Press (GREETING) . To erase the recorded greeting message Press (GREETING) Press (ERASE) while the message is being played. • The unit will answer a call with a pre-recorded greeting. Pre-recorded greeting message If you do not record a greeting message (p.
17 Preparation For assistance, please call: 1-800-211-PANA(7262) Programming Summary for Answering System You can program the following functions using the handset near the base unit. See the corresponding pages for function details. Make sure the unit is not being used and the handset is lifted off the base unit.
Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press (PROGRAM) . • The TALK/MUTE indicator flashes. 2 Press (FLASH/CALL!WAIT/PLAYBACK) . • “P” is displayed on the base unit. 3 Press (0) . • “ Set time ” is announced from the base unit.
Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press (PROGRAM) . • The TALK/MUTE indicator fl ashes. 2 Press (FLASH/CALL!WAIT/PLAYBACK) . • “ P ” is displayed on the base unit. 3 Press (5) . • The current setting is displayed on the base unit.
20 1 Press (PROGRAM) . • The TALK/MUTE indicator fl ashes. 2 Press (FLASH/CALL!WAIT/PLAYBACK) . • “ P ” is displayed on the base unit. 3 Press (2) . • The current setting is displayed on the base unit. 4 Press (0) , or (2) to (7) to set the number of rings.
21 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) (OFF) Microphone (HOLD/INTERCOM) (REDIAL/PAUSE) TALK/MUTE Indicator , , Making Calls 1 Press . • The TALK/MUTE indicator lights.
22 If noise interferes with the conversation Press Ü to select a clearer channel in the talk, intercom or remote operation mode, or move closer to the base unit.
23 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Answering Calls 1 If the handset is off the base unit; Press . • You can also answer a call by pressing any dialing button (0) to (9) , (*) or (#) (— Any Key Talk ). OR Press , and when the other party answers, talk into the microphone.
24 Speed Dialer Storing Phone Numbers You can store up to 10 phone numbers in the handset. The dialing buttons ( (0) to (9) ) function as memory stations. Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press (PROGRAM) .
25 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Intercom A 2-way intercom is possible between the handset and the base unit. Paging the base unit from the handset 1 Handset: Press (HOLD/INTERCOM) . Talk to the paged party after the beeps.
26 Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user.
FLASH Button Pressing (FLASH/CALL!WAIT/PLAYBACK) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting.
28 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded. • The total recording time (including greeting message) is about 15 minutes . If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes.
29 Answering System For assistance, please call: 1-800-211-PANA(7262) Listening to Messages You can see the total number of recorded messages on the base unit display. If MESSAGE PLAYBACK indicator fl ashes, new message have been recorded. To play back messages, press (MESSAGE!PLAYBACK/SLOW!TALK) .
Listening to Messages 30 To stop operation Press (STOP) . • To resume playback, press (MESSAGE!PLAYBACK/SLOW!TALK) . • If you do not press any button for 60 seconds or if you press (STOP) again, the playback mode will be canceled. Press (REPEAT) .
31 Answering System For assistance, please call: 1-800-211-PANA(7262) From the Handset If someone else is in the room and you want to listen to the recorded messages privately, you can use the handset. 1 Handset: Press (FLASH/CALL!WAIT/PLAYBACK) . • The number of new messages is heard on the handset.
32 Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: —“ Memory full ” is heard. —“ ” is displayed on the base unit. — the ANSWER ON indicator fl ashes rapidly.
33 Answering System For assistance, please call: 1-800-211-PANA(7262) Recording a Memo Message You may record a personal message in memory. 1 Press (MEMO) . • A long beep sounds. 2 After the beep, talk clearly approximately 8 inches (20 cm) away from the MIC .
34 Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. A synthesized voice menu will guide you on how to operate the unit (p. 36). • To skip the voice menu and operate the unit directly, see page 38.
35 Answering System For assistance, please call: 1-800-211-PANA(7262) Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00 – 99) . The factory preset remote code is “ 11 ” .
36 Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press 1 to play back new messages. Press 2 for other functions. Press 1 to record your message. Press 2 for other functions.
37 Answering System For assistance, please call: 1-800-211-PANA(7262) All Message Playback All recorded messages are played back. At the end of the last message, “ End of final message ” is heard. The unit will announce the remaining recording time if it is less than 5 minutes.
38 [ Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu.
39 Answering System For assistance, please call: 1-800-211-PANA(7262) ERASING A SPECIFIC MESSAGE (During playback) ERASING ALL MESSAGES ANSWERING SYSTEM OFF (0) • The current message is erased. • A short beep will sound and the next message will be played.
40 Remote Operation with the Handset Voice menu If no commands are entered after you press (FLASH/CALL!WAIT/PLAYBACK) , the unit will start the following voice menu. “ Press 4 to play back new messages. Press 5 to play back all messages. ” • You can enter direct commands even if the voice menu has started.
41 Answering System Direct commands For assistance, please call: 1-800-211-PANA(7262) NEW MESSAGE PLAYBACK ALL MESSAGE PLAYBACK REPEAT (During playback) SKIP (During playback) CHANGING PLAYBACK SPEED .
42 Wall Mounting This unit can be mounted on a wall phone plate. 2 Connect the AC adaptor. 3 Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. • The word “UP” should face upward. 1 Push the hook and turn it around.
43 Useful Information For assistance, please call: 1-800-211-PANA(7262) 4 Connect the telephone line cord. Mount the unit, then slide down. • Raise the antenna. • Fasten the telephone line cord to prevent it from being disconnected. 5 To charge the handset battery: Fix the charge contacts ( # ) and insert the hook to the handset hole ( $ ).
44 H You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Headset Jack Connecting an optional headset to the handset Open the headset jack cover, and connect an optional headset to the headset jack as shown below.
45 Useful Information For assistance, please call: 1-800-211-PANA(7262) Battery Replacement A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream.
46 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66.
47 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem An alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The unit does not ring. You cannot store a phone number in memory. While storing a phone number, the unit starts to ring.
48 Troubleshooting Problem You cannot redial by pressing (REDIAL/PAUSE) . You cannot have a conversation using the headset. Remedy • If the last number dialed was more than 32 digits long, the number will not be redialed correctly. • The button has a double function as either redial or pause.
49 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem The answering system is on, but incoming messages are not recorded. You cannot listen to the recorded messages. “” is displayed and the ANSWER ON indicator fl ashes rapidly, and no new messages are recorded.
50 General Troubleshooting Problem While recording a greeting message, the unit starts to ring and stops recording. During playback, the unit starts to ring and stops playback. Remedy • To answer the call, lift the handset off the base unit or press , or .
51 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem You cannot program items such as the dialing mode. Previously programmed information is erased. The RECHARGE indicator fl ashes or the unit beeps intermittently. You charged the battery fully, but the RECHARGE indicator fl ashes.
52 Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.
53 Useful Information For assistance, please call: 1-800-211-PANA(7262) CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re.
54 FCC and Other Information If requested by the telephone company, inform them as follows: Registration No. ....................................................(found on the bottom of the unit) Ringer Equivalence .....................................
55 Useful Information For assistance, please call: 1-800-211-PANA(7262) CAUTION: Any changes or modi fi cations not expressly approved by the party responsible for compliance could void the user ’ s authority to operate this device.
56 • Environment — do not place the unit in a room where the temperature is less than 5 ° C (41 ° F) or greater than 40 ° C (104 ° F). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
57 Useful Information For assistance, please call: 1-800-211-PANA(7262) Index A Accessories ................................... 2 Answering calls ........................... 23 Automatic Security Code Setting .2 6 B Base location .....................
For product service • Call 1-800-211-PANA(7262) for the location of an authorized servicenter. • Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY When you ship the product • Carefully pack your unit, preferably in the original carton.
.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanter í a, Km. 9.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic KX-TG2227S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic KX-TG2227S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic KX-TG2227S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic KX-TG2227S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic KX-TG2227S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic KX-TG2227S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic KX-TG2227S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic KX-TG2227S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
